Questions

Why does Adobe evade all privace settings. Why is Adobe "capturing my screen" after I check Deny and remove access in my settings?  Every few minutes PR is capturing my screen.  

Hello tout le monde, J'ai vu le nouveau tools de masquage par AI sauf que j'ai besoin. de faire un suivi manuel car l'AI ne detecte pas l'objet.Mais je ne vois plus du tout comment faire rien de se que j'ai testé ne fonctionneSi quelqu'un a la solution

I would like to try the beta version (I think it is 25.x of Premiere Pro but it is not present in my CC. I see all the other beta versions (Aero, Photoshop, Premiere Rush, InDesign... ) but not Premiere Pro.Why?

I have used premier beta 25.6.0 build 74I have used these same settings to export 4 other videos, now after an update, i get this error with no way to fix it. even worse, it will not let me open the file in the non beta 2025 version.Also, when I click on an inserted jpg on the storyline, so it is selected, it will not allow movement and scaling. I double click in the monitor and the scaling boxes in each corner and the centers never show up. however, if I close and reopen the file, it works perfect. 

기존에 포토샵 프리미어 단일앱 쓰고 있었는데그 전에는 포토샵 베타 버전까지 다운받아서 잘 쓰고 있었씁니다근데 프리미어프로 베타 버전은 크리에이티브 클라우드에 안뜨길래크리에이티브 클라우드 재설치를 했는데포토샵 베타버전은 물론 프리미어 프로 베타버전도 안떠서 설치를 못했습니다그래서 이번엔 모든앱 플랜 업그레이드까지 했는데도 안뜹니다도대체 프리미어프로 포토샵 베타 버젼은 어떻게해야 설치해서 사용할 수 있나요 ?기존에 쓰고 있었던 포토샵 베타 버전도 사용을 못해서 정말 답답합니다

Estoy trabajando en Adobe Premiere BETA v25.6.0.059 y no encuentro el botón de hacer máscara a mi clip para dividir ya sea una parte del video, como tampoco de una herramienta como desenfoque u otros,.

Hi all, in the latest version of Premiere Pro (currently in Beta), we have the option to mask objects and track them.When I started tracking, it used my CPU, instead of my GPU. Is it possible to have GPU acceleration enabled for this feature? It took 3 miuntes to track 10s of clip. In Davinci, with the same setup and GPU acceleration, it takes a few seconds. It would be a great addition.Is that possible please?Thank youBest,Max

Steps to reproduce:Say you have two clips you need to color grade, and you don't really want to do an adjustment layer.1. You adjust the first clip to taste2. Copy the clip3. Select the 2nd clip4. Paste Attributes>Lumetri. This adds the Lumetri effect to the 2nd clip.5. You decide you don't like what you did so you go back and edit Lumetri in clip 1.6. Copy the clip7. Select 2nd clip and paste Attributes>Lumetri Result: There are now TWO instances of Lumetri in Clip 2. As a result the colors don't match until you delete the first instance. Feature request: In Paste Attributes, add a switch to UPDATE or OVERWRITE existing effects. (That's how it works to paste scaling or positioning.) System info    Application: Premiere Pro (Beta) v25.6.0.70    OS: Windows v10.0.26100, RAM: 63.79 GB GB, CPUs (logical): 16

Premiere randomly looses ducking keyframes and extended audio in the timeline. Cannot figure out what causes it to do so. I use a preset for ducking and often it shows as not being saved. Loads of Cannot access Audio error messages. B70 W11.

In the Preferences transition duration is set to 1 second   Applying a FI transition (e.g. Stretch) to the timeline it sets it to two seconds or some random duration, ignoring the setting. Only Impact dissolve set as default seems to honor the preferences.   25.6.0 B70 W11    

I have a Multicam Sequence and I don't see the Multicam Button. When I try to add it, it still doesn't show up. Fortunately the keybard shortcut works (Shift+0). Premiere Pro (Beta) 25.6.0 (Build 68)  

Hello! I try to use the Ultra Key effect and it doesn't work for me. When I apply it, it comes out lead-colored and not transparent. Is there any change in the new update? I don't know why it's happening to me.

Hey guys, After Effects (Beta) (Version 24.3.0)(Windows 11) crashed a couple of times while I was working. After restarting my computer and relaunching After Effects, I received a message that my preferences were invalid. The application created new preferences and moved the old ones into files with “-old” in the name.When I tried to open my main project file (.aep), I received the error:After Effects error: missing data in file (33::4) The last available Auto-Save is from June (not sure how that happened), and I was incredibly stupid and haven't backed up my hard drive in a few months. So I have lost some months of work unless I can recover the file somehow. I have already attempted opening the project in the latest stable release, as well as importing the corrupted project into a new project. I tried renaming the file to .zip to see if it was XML-based, but I couldn't extract it. Using a hex editor, I can still see effect names, asset references, and file paths, which

I use masks a lot. Ai masks - great. What you've done to the rest of them - hard facepalmPreviously: I have an effect on a clip and I want to mask it. Generally I'm already in the effects panel, I click on the mask icon and adjust the mask. Yes adjusting each point is a pain in the bum, this could be improved. Beta 25.6.0:I mouse to the tools pallete,click and wait for the dropdown, select the rectangedraw the maskmouse back to the effects palletedrag the unasigned mask to the effectAdjust the mask whilst trying to see what effect its having through the "helpful" red mistSomeone is going to tell me I can assign a shortcut to it.  Can I get a shortcut to drag the unnasigned mask to effect? What If I have a lumetri effect open?  WIll I have to drag it past all that to the effect I want?  Or will I have to close all the effects before I can drag it to the one I want.  Putting the mask in an unasigned item is one of the clunkiest user interface cluges I'v

This new mask tracker is so fast it can be very difficult to stop it when tracking goes bad. I mentioned in the pivate beta that a "track in to out"  option would be great, and now having played with the tracker more, it almost seems necessary otherwise I would have to razor blade everything , which is not ideal...

Hi there, I was finally able to figure out the way new masking tool works..... its incredible but somehow it wont render.... i use 8 Gb Graphic Card still it keeps crashing. It wont render more than 2 frames. I was just trying the tool on one small clip of just 10 seconds. Can someone help

Why is the Dynmaic Link Manager not automtacially stopped when I try update my software? Instead we do a dance of scheduling it three or four times before I just give up. Yes, I could do a search in my Mac Utilities and open Activity Monitor and force quit it but why do I have to? If this needs to be closed, close it! Or find a work around so we don't have to!

1. I'm using Adobe Premiere Pro 2024 Beta2. Windows 10 Enterprise Version 22H2.3. Opening a New Sequence or opening the Sequence Settings Dialogue Box.4. When I want to open a new sequence, the dialogue box that pops up doesn't scale to fit my system. When opening on my laptop screen, it is too large and it doesn't have the ability to manually drag the size around to fit. I have to move it to an external monitor with larger screen space to see the bottom of the dialogue box.  The Sequence Settings box has the same issue. 

Both Premiere Pro (Beta) and Audition (Beta) are up to date. When I attempt to edit Premiere audio via dynamic link, I get a message that Audition is not up to date. Link not established.(I have attempted this after each update in the past week) Works fine in the non beta version.

I can't find a post on it, maybe I missed it, so I won't spoil the surprise if there is one. But there is ANOTHER great feature (after the New Masking feature, and the media search feature) that is so excellent. I really thank you... remember the hub-bub of the obsolete effects...  so cool... thanks again.

So I'm shooting with two Sony PXW-FS5s. You can't customize file names, and the names are the same, so I ingest the clips into separate folders and import those as bins. Now I need to create a multicam sequence, but since I can't select two clips in different bins, I don't see "Create multicam sequence" command. Is there a way to create a multicam sequence from clips in a different bin, or do I have to put everything in the same bin first? System info    Application: Premiere Pro (Beta) v25.0.0.14    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16

Where is the NEST option in the 25.6.0 version?Thanks

My premiere beta is on version 25.6, and when opening a project, using the mouse scroll, the timeline is not followingIn the previous version, other than the beta version, when scrolling the mouse the timeline followsIs there a setting to be changed or does my program have a bug?See the video I made exemplifyinghelp me 😞

Premiere Pro beta 25.6 Where have the Mark Die-Cut tools gone?

Premiere Pro (Beta)Version of the appPlatform and OS versionBasic steps to reproduce the problemExpected result and actual resultVideos Are Not Playing - Adobe Product Community - 14341801vjcjbhkbmnb vkjos;ldl;gfdl;dslkl;'k';dsgkdslf';gk 'sld'lk'sd;flgk sd';glsd' sd'g