• Global community
    • Language:
      • Deutsch
      • English
      • Español
      • Français
      • Português
  • 日本語コミュニティ
    Dedicated community for Japanese speakers
  • 한국 커뮤니티
    Dedicated community for Korean speakers
Exit
2

Can Adobe FIX Zoom level in the Program monitor, please?

Enthusiast ,
Feb 01, 2024 Feb 01, 2024

Copy link to clipboard

Copied

I'm using a FullHD display and working with with 4k footage. When I need to animate a mask a part of which goes out of the screen, the only way of doing so is setting a smaller zoom level.

5E17_0-1706817755404.png

The problem is that 75-50-25% IS WAY bigger than the program monitor screen is, even the 25% makes it look like that (cropped):

5E17_1-1706817841935.png

So why is 100% not actual 100% of the screen but rather a multiply by two? Isn't it logical to make FIT a 100% zoom level and the rest of the numbers - higher or lower from that number? And to say the least, why cannot Adobe make it changeable by just typing the necessary number should it be 1123or 19 or change via the mouse scroll like it is in Ae...

So the only ways for me is either go fullscreen every time which is completely not convenient or go by 10% like that:

5E17_2-1706818113165.png

Have you tried masking at 10%, Adobe? This is so exciting!

 

Idea No status
TOPICS
Editing and playback , User experience or interface

Views

650

Translate

Translate

Report

Report
Community guidelines
Be kind and respectful, give credit to the original source of content, and search for duplicates before posting. Learn more
community guidelines
14 Comments
New Here ,
Feb 01, 2024 Feb 01, 2024

Copy link to clipboard

Copied

Seconded, similar problem!

Votes

Translate

Translate

Report

Report
Adobe Employee ,
Feb 01, 2024 Feb 01, 2024

Copy link to clipboard

Copied

In the Program Monitor, the percentage refers to the percentage of the sequence frame size, not your display. If you are working with a 4K sequence (3840x2160) and an HD display (1920x1080), then putting the view at 100% means the sequence is zoomed larger than your display can even show.

 

Another way to think of it is that 100% means "show me every pixel, with no scaling". Each pixel of the frame maps to a pixel on your display. This is very useful if you need to check for dead pixels or other small artifacts that may disappear when the frame is scaled down.

 

This can also be complicated by Windows or macOS's display scaling. Premiere Pro will render using the actual pixels on your screen, not the virtual "points" that are generated by display scaling.

Votes

Translate

Translate

Report

Report
Adobe Employee ,
Feb 01, 2024 Feb 01, 2024

Copy link to clipboard

Copied

Sorry for providing an explanation and not a solution. Given that 100% has a clear and useful meaning, I don't think we'll be changing that. But for your situation @AndrewTheGreat would it help to have more zoom options below 50%? Like maybe 38% and 18%?

Votes

Translate

Translate

Report

Report
Enthusiast ,
Feb 02, 2024 Feb 02, 2024

Copy link to clipboard

Copied

mattchristensen, hi, yes no explanations needed, but a solution is. I (and all my collegues and friends using Premiere Pro professionally) agree upon the idea that a more accurate zooming should be added in a product Premiere Pro is . Actually the solution I mentioned above - having a 100% zoom as the FIT option - would be the perfect solution but if it cannot be added in Premiere Pro due to the facts mentioned by you then may be - some more options below 50%, like 5% increments. I'd suggest introducing an additional tab in the Preferences menu where a person can choose the 5 default zoom levels available in the Zoom level menu of the Program monitor, so that if I don't use 400-800-1600% (and I never do) I can change them to those I use frequently, thus this menu will not grow in size still retaining all the necessary levels.

Votes

Translate

Translate

Report

Report
Adobe Employee ,
Feb 02, 2024 Feb 02, 2024

Copy link to clipboard

Copied

Hi @AndrewTheGreat,

I'll move this to the Ideas forum. I hope that's OK.

 

Thanks,
Kevin

Kevin Monahan - Sr. Community & Engagement Strategist – Pro Video and Audio

Votes

Translate

Translate

Report

Report
Community Expert ,
Feb 02, 2024 Feb 02, 2024

Copy link to clipboard

Copied

If you set the PM full screen you can set the zoom level way higher without loosing the frame.

Votes

Translate

Translate

Report

Report
Enthusiast ,
Feb 02, 2024 Feb 02, 2024

Copy link to clipboard

Copied

mattchristensen, @mattchristensen 

 

It seems you've missed the point of the original post.

 

100% means "show me every pixel, with no scaling". Each pixel of the frame maps to a pixel on your display. This is very useful if you need to check for dead pixels or other small artifacts that may disappear when the frame is scaled down [...] Given that 100% has a clear and useful meaning, I don't think we'll be changing that.

 

A few observations:

 

1. 100% means "show me every pixel, with no scaling".

Why doesn't it mean "I can see 100% of the frame"? (This seems to me an obvious, intuitive interpretation that users will make).

A clearer communication of your sense is "pixel for pixel", where 100% leaves room for interpretation (particularly if I have to start interpolating what 25% means etc., ... in the context of a nearby "playback resolution" option for 1/2 and 1/4 etc. (Pick a lexicon!) This is typical Adobe inconsistency which lends itself to user frustration.

For these reasons, I take issue with your statement "that 100% has a clear and useful meaning". It seems you've come to this conclusion without actually talking to or listening to users.

 

2. This is very useful if you need to check for dead pixels or other small artifacts that may disappear when the frame is scaled down.

Given that the original post was about frustration while masking ... a designer should ask themselves:

- How often do users check for dead pixels / artefacts vs. other functions that this particular element is used for?

- Is there a useful way to address the problem of masking which has been raised?

The original poster asked you: Have you tried masking at 10%? I'll ask an additional question: do you understand the masking problem that has been raised?

 

3. The post asks "Isn't it logical to make FIT a 100% zoom level and the rest of the numbers - higher or lower from that number?" In other words, the poster is frustrated with the current design choice (which you have explained) and suggesting another design choice (which you have not addressed).

 

Votes

Translate

Translate

Report

Report
LEGEND ,
Feb 02, 2024 Feb 02, 2024

Copy link to clipboard

Copied

As a user, I do not find logical making anything about basing a scaling for a monitor that changes sizes on "100%", being fit to any particular size you've set the program monitor to.

 

I've been used to 100% always meaning pixel to pixel. In several apps.

 

The scaling percentage used in the program monitor is entirely sensible to me ... it's a percentage of whatever size the program monitor is at at that moment.

 

I run 9 custom workspaces, and the program monitor varies between barely visible to 1/4 of the screen.

 

I would love having more settings available to choose when wanting a smaller image to use as you are doing though.

Votes

Translate

Translate

Report

Report
Enthusiast ,
Feb 02, 2024 Feb 02, 2024

Copy link to clipboard

Copied

... And one additional note.

 

As ever, Adobe documentation on this displays none of the detail that mattchristensen has outlined.

 

"In the Program Monitor, percentage values refer to the image size specified by the sequence settings."

 

Note: that doesn't really explain much, does it?

 

Why not just say "pixel for pixel, with no scaling, meaning one pixel of the sequence image is displayed as one pixel on the hardware display"?

 

@mattchristensen 

@Kevin-Monahan

(documentation issues)

 

Votes

Translate

Translate

Report

Report
Enthusiast ,
Feb 03, 2024 Feb 03, 2024

Copy link to clipboard

Copied

@Ann Bens This is not convenient and quick, to constantly go full screen since you don't have an access to different properties or FX you need to change realtime.

Votes

Translate

Translate

Report

Report
Engaged ,
Feb 03, 2024 Feb 03, 2024

Copy link to clipboard

Copied

Even though it's not possibloe to create a mask point outside the frame, you can create it inside the frame and then drag it out of the frame. I use this method all the time.

Votes

Translate

Translate

Report

Report
Community Expert ,
Feb 03, 2024 Feb 03, 2024

Copy link to clipboard

Copied

You can make nodes outside the frame without dragging.

Votes

Translate

Translate

Report

Report
Enthusiast ,
Feb 04, 2024 Feb 04, 2024

Copy link to clipboard

Copied

@Tranquil_Cosmos157F 

You cannot move it if it's outside the box

Votes

Translate

Translate

Report

Report
Engaged ,
Feb 04, 2024 Feb 04, 2024

Copy link to clipboard

Copied

LATEST

It's true that you can't move individual points if they are outside the panel, but you can move the whole mask. And if you maximize the panel, you should have lots of space on the sides if working on an ultrawide monitor. See image. I do agree that it could be simpler, like in After Effects. I'm just offering a pretty good workaround for those who may not know about it.

 

2024-02-04 11_20_07-Adobe Premiere Pro (Beta) - C__Brukere_leirp_OneDrive_Skrivebord_VCVS_Projects_A.png

Votes

Translate

Translate

Report

Report