If you want CinemaDNG supported in future versions of Premiere Pro, please make a feature request: http://www.adobe.com/go/wish ... View more

What you are looking for is a global command equivalent for FCP's "gear down" behavior. With certain keystrokes, you could trim or move clips more slowly and precisely. This is what you really want, so I moved this post into the "Ideas" forum. Please upvote!   Thanks, Kevin ... View more

rmartin215 wrote: Has the clip marker problem been resolved in Premiere CS6.  As of early July, it was not!  Navigating, synchronizing clips seems impossible. Can you explain your exact problems? ... View more

tclark513 wrote: What exactly is the proximity helper? It's not an official name, but I believe they are speaking of the relative area near the edit point, where the selection tool turns into a trim tool. Right guys? ... View more

Jim Simon wrote: I'd rather just have the ability to turn off Edit Point Selection, so things work as they did before. That's certainly a valid request. ... View more

Thanks for the feedback Toomany. I'll make sure the powers that be know about that. ... View more

Jim Simon wrote: It's the proximity "helper" that drives me crazy. Right?! Thinner cursors and less space for the proximity "helper" sound like great feature requests: http://www.adobe.com/go/wish ... View more

Jim Simon wrote: Another point where we'll have to agree to disagree. No, I can't allow you to disagree with me on this one.  Just because I disagree, doesn't mean your points aren't valid. Jim Simon wrote: Mouse trimming HAS taken a step backwards, and needs to be corrected in some fashion. What do you suggest? Jim Simon wrote: But...the ease and responsiveness of mouse trimming has been tampered with, and that's not acceptable. You can trim largely in the same way, in my experience. The main beef legacy users seems to have is that you can't trim with the mouse unless you are somewhat zoomed into the Timeline. Am I correct, or am I missing something? Jim Simon wrote: That feature took a step backwards when you guys added the keyboard ability.  Mouse trimming needs to be fixed so that it's as easy as it was before. Something had to give way so that users could edit with the keyboard. It was one of our top feature requests. I'm not sure how you'd like to see how mouse trimming would work, given that selecting edit points are now a fact of life. You have edited with other NLEs too. NLEs that have edit selection. Leaving Premiere Pro aside, why do these NLEs have better mouse trimming? Or do they have the same problem as you've found with Premiere Pro CS6? I'd love to help you out, so let me know how you'd like to see the legacy way of mouse trimming while maintaining the feature of keyboard trimming in the Timeline in CS6. ... View more

cliffclof wrote: The mouse uses about 5 pixels of extra space for blind people and in turn makes it feel Tonka Toy playschoolish.     I really want to go back to the old version just because of this. Once again...   If I'm this inaccurate with a mouse I probably shouldn't be using adobe products to start with. You can make a feature request for "less chunky" tools. I don't think that's an odd request at all: http://www.adobe.com/go/wish ... View more

Jim Simon wrote: ... and not take backwards steps as was done when adding keyboard trimming. Another point where we'll have to agree to disagree. For me, keyboard trimming ROCKS. ... View more

SimonHy wrote: But I know a lot of the more casual editors who use Premiere at my office are mouse orientated, and like to have all the buttons turned on. I don't see why it's not possible to have a flexible system, that suits both types of users. That should be Adobe's goal. It is. That's why we made things like the button editor--you can have as many buttons as you want in the interface. Continued feature requests will help guide us as to what you guys want in the app. Keep 'em up. ... View more

cfg_2451 wrote: Kevin Monahan wrote: I want to edit with no mouse, as I did with FCP. Videos this evening Why? If you want to use FCP, why are you working for Adobe? That's not a rhetorical question. Huh? I didn't say that. I'm just stating the fact that legacy FCP was set up better for keyboard only editing over Premiere Pro (however, It took them all the way until version 7 to do so), and we're coming closer ourselves with every version. You don't need to read any more into it than that. cfg_2451 wrote: What I want, as an Adobe customer, is for Adobe to be more Adobe-like. If I wanted it to be more FCP-like, I'd just buy FCP and cut Abobe out of the loop. You seem to be taking "chasing the competition" to the extreme, and loosing yourselves in the bargin. Just sayin'. I don't think the way we've evolved is extreme at all, in fact, I think we've progressed nicely. I'm sure you've noticed that Premiere Pro has been undergoing some big changes, over the past few versions in particular. These changes are geared towards professional editors, and the tools they like to use in other NLEs. We're not losing ourselves, quite the opposite. Most pro editors seem to love the direction we're going in. We're in the software business, so we need new users to survive as a company. Adapting our tools to be more useful to newcomers is important to us, as we would like to keep them as customers. Hope that makes more sense to you. ... View more

Jim Simon wrote: And so it is simply more efficient to keep one hand on the mouse at all times. Here is where we'll agree to disagree. ... View more

Jim Simon wrote: Wanna race? I still think I could beat you on this front (using older PP of course.) Cheater! You can't have it both ways. I want to edit with no mouse, as I did with FCP. I'm skeptical that's entirely possible.  How did you select multiple clips in a bin, especially when they weren't sequential?  How did you scroll the timeline view horizontally?  How did you scroll it vertically when you have many layers?  How did you make a window larger or smaller? OK, I'll back off and say edit almost always w/o the mouse. Basic editing should be doable without touching the mouse. When would I need to select multiple non-contiguous clips? Rarely, right? For storyboarding, I guess. Usually, I load a clip, mark it, and slam it into the Timeline. Not fair with "scrolling the timeline horizontally" as FCP was always broken in this regard. Can't believe they never fixed that. I rarely scrolled with the Hand tool, I just hit the K key to stop to see where I was. Never needed to scroll vertically as I had custom layouts with a tiny canvas and max room for tracks in my list of shortcuts--same with window size. ... View more

Jim Simon wrote: you can now trim clips without even touching the mouse, and that's fast. But not as fast (or as precise) as using the mouse when your hand is already on the mouse anyway. It might not be. Wanna race? Besides, my hand is not always resting on the mouse, though I know you edit that way. I want to edit with no mouse, as I did with FCP. ... View more

shooternz wrote: I now want to find a  single KBD setting to take me to the nearest edit point and set a Trim Mode ( from which I can Toggle to the others.)  ie. I know there are five different Trim Modes shortcuts available. - I want ONE ONLY to locate the edit point nearest and get into Trim Mode just as if I had clicked it with a mouse cursor.. You can press the T key, and it will select the nearest edit point and open up trim mode. Is that what you wanted? If you want to remain in the Timeline to trim, you have to select one of the following: If you want to have the "T" behavior in the Timeline, the closest would take two shortcuts: one of the above shortcuts, then press Ctrl+T. If that doesn't suit you, please make a feature request: http://www.adobe.com/go/wish ... View more

benwinter wrote: I think what I meant, and the OP meant as well, was that you didn't have to zoom in quite as far before to get the same level of precision in selection. Right, and I agree with you. It's not all drawbacks though, you can now trim clips without even touching the mouse, and that's fast. The ability to select edits isn't going away, so we need to start getting used to all its quirks. ... View more

Besides Premiere Pro CS5.5 and earlier, I don't think there's an NLE that doesn't allow you to select edits. So, as far as edit selection goes, you simply have to zoom in to an acceptable level. It's a fact of life for all NLE editors, I'm afraid. ... View more

There are associated minuses with edit point selection, gang. If you are a mouse-centric person, the key is to be in the right zoom level as you edit (as shooternz suggests). You can also use shortcuts to select next or previous edit points, as well as a toggle to move through the various ripple or roll options. tclark513 wrote: No...the one that was on top with the ends that curved down.  I know they are similar but the other one seemed more responsive or "faster". They do the same thing, but if you would like more granularity or responsiveness with the zoom/scroll bar, make a feature request: http://www.adobe.com/go/wish ... View more

Spot of Bother wrote: Premiere CS6 doesn't give the option to switch on Hardware Mercury Playback unless I do the hack. The computer is brand new, we've only just begun testing it. If you want this card officially supported, please make a feature request: http://www.adobe.com/go/wish ... View more

pkroll wrote: Kevin - do you know if Adobe is only just becoming aware of this bug? Not trying to rush you - just very curious what's going on. I'm currently sitting on two different expensive grahics cards that were purchased to test this, knowing I need to return one or both depending on how this is resolved, so I'm curious as to what the status is. Yes, thanks to you, we are working on a fix. I submitted the bug report last week. Here's to hoping for a quick resolution. ... View more

mypetfroguk wrote: I think I'd be accused of being 'aggressive' if Adobe had this GPU sprung upon them.  However this will not be the case.  The processor has been around for a while, it's inclusion was rumoured many weeks if not months ago, and Apple will surely have been in discussions with Adobe about the inclusion of the processor (just like they were about the Retina display as Photoshop was shown at the WWDC yesterday and Apple said Adobe are already working on an update to utilise the retina display). Yes there will be a lead time, but I'm sure Adobe knew way before yesterday! I'm merely asking the question, and for those editors looking to upgrade laptops it would be useful to know whether Adobe plan to include this GPU in it's approved list.  This is Apple's most powerful laptop ever (and a huge resource for pro video editors around the world) and it would be rather crazy for Adobe to ignore the potential of this machine, especially in their efforts to tempt FCP switchers over to Adobe Premiere CS6 (very evidently a target market).  So an early announcement can only help.  I don't think that's too unrealistic! Make a feature request if you want this GPU to be supported for the Mercury Playback Engine: http://www.adobe.com/go/wish Of course, we cannot talk about our future plans, but you can check out what we have done in the past regarding certifying new GPUs. That may give you some clue about our intentions. ... View more

Hi ViperJPB01, I tested this out on my MacBook Pro (OS X 10.6.8, 8GB RAM, NVIDIA GeForce GT 330M, Core i7), and did encounter the same issue. However, on my PC (WIN7, 32 GB RAM, NVIDIA Quadro 4000), I did not encounter that issue. I'll investigate further. ... View more

Hi guys, Is this XDCAM footage? Tearing with XDCAM footage is something we are looking at right now. We are aware of the issue and are working hard for a fix. ... View more

Bigredfirecracker2 wrote: The 6870 is a really good card for the money, and it's great finally being able to choose any new card on the market to run on a mac. I hacked nothing installing it, and as far as I can tell the mac recognises it prefectly. Come one Adobe, stop holding us mac users back. I've signed up for a year of creative cloud considering moving to prempro from FCP, but if ae won't work on on one of my machines it's not worth considering. Hi Bigredfirecracker2, After Effects works just fine with nearly every video cards released over the past 5 years. Are you asking for the 6870 to be approved for hardware acceleration in ray-traced 3D rendering? You can file a feature request for that: http://www.adobe.com/go/wish . More on how to give feedback: http://bit.ly/93d6NF ... View more

Hi How Funny, Transcoding is, indeed, a workaround. You should not have to do so with After Effects, provided the codec is on the list of supported import formats: http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7f86a.html#WSB108BC99-A69B-46c4-86D3-2192805C2AF8a If you are having trouble importing your MP4 files, please file a bug report: http://www.adobe.com/go/wish We would be interested in investigating this problem further. ... View more

It should work just fine. Download the 30 day free trial and see for yourself: http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_pro ... View more

svidano wrote: @ Kevin Monahan: Do you have any answers for this post? See post #30. Thanks. ... View more