Adobe Media Encoder

Hello, I'm hoping one of the pros here can help me diagnose the AME render error I get when I try and render this video. I've tried rendering on my home computer and it works but when I render on my work computer it fails. I've attached the error log. TIA ~Amy  

The CC previously installed ME 2021 15.1 and today CC installed additionally 2020 14.9. Why do I need both of them? Should I remain only with 15.1 and uninstall the 2020 14.9?

Documents\mediaEncoder\Common\Media Cache Files

 It worked just fine yesterday. But today, when I was about to output a short video clip, the output video become this:

hey all ,  for some reason media encoder 2021 is canging the out put gamma of the EXR.  i am rendering exr 16bit zip and it used to be ok in previews versions , but sinse i updated the media encoder it is doing that. any idea on what might be the solution   thanks

I haven't been able to open Media Encoder or export from Premiere since I most recently updated Windows 10. I've tried uninstalling and reinstalling both Premiere and Media Encoder, but cannot get Media Encoder 2021 (v15, v15.1 or v15.2) to open. I am able to open Media Encoder 2020 (v14.9) no problem, so I don't understand why I'm having such an issue with the 2021 version of this software?

Hello, How do I restore the green tick, that was visible on a successful encoding? We often have dozens of parallel encodings and this was always the only reliable source for indicating the encoding status. Thank you very much!

Hi,I need the media encoder to make proxies on premiere pro. However when I go to download media encoder is simply says 'waiting' and then says 'installation failed' with no other error message. Can someone please help me? I've tried the trouble shooting online I can findthank you 

Mac Catalina 10.15.7Mac Pro 2019Proc: 3.3 GHz 12-Core Intel Xeon W96 GB 2933 MHz DDR4Vid Card: AMD Radeon Pro Vega II 32 GBAfter Effects Ver 15.2  +  Adobe Media Encoder 15.2. (this did not happen on my mac trashcan and older versions of AE/AME)I render a Prores 4444 with alpha file from After Effects into a watch folder where AME picks it up and converts it to mp4 (yes i dont care about the alpha channel, its for proofing).    The mp4 that it spits out a messed up color version plus its inverted.  Using Software and Hardware encoding in AME results in differing color patterns.  The 4444 file rendered out of After Effects is correctly colored.  See below for settings and input output examples.  HALP!   

I had to downgrade back to 15.1 due to an MXF importer error running 15.2.  The error occurs when attempting to export H.264 from a sequence built with a variety of source files: MXF, APR 422, H.265, H.264 and a variety of LUTs.  This is a typical assortment for my workflow so I downgraded.  I tested several successful workarounds in 15.2 -- 1. disabling hardware encoding and 2. exporting partial sequences with only MXF clips.  MacPro7,1 / MacOS 11.3.1 /  AMD Radeon Pro Vega II

I cant use the latest version of AE and ME. The colors gets all washed out.Have to use the earlier version.../Sofia 

Whenever I am exporting in Media Encoder, my program always brings up a crash report and I don't know why. I've tried both acceleration encoders and they still crash my application. 

How to export to H.265 in 2021?

I was rendring a file using Adobe Media Encoder but it couldn't complete. Is there a possibity of getting the rendered part to play? I lost access to the source files.

GPU usage on my Mac Pro is through the roof -- sounds like a jet engine with all the fans at top speed. Exporting a 30 minute video to H.265 (60fps, 1080p) with one effect (exposure/gamma) is putting both GPUs on the Radeon Pro Vega II Duo bove 80% usage. And it's no faster than the previous version (takes about 15min to export). Mac Pro, AMD Radeon Pro Vega II Duo, 224GM RAM, 16-code processor, Big Sur 11.3 (going to 11.3.1 this afternoon). Fans died down when the export was finished and usage went back to normal. Repeatable.

I would like to stitch multiple files together but, unlike everyone else in the world, would like to add a second or so of blank space between them. that way when I am using them as b-roll I can see where one video ends and the next begins. How can I add blank space between stitched videos?Thanks a ton.Van

I updated my computer to the latest AME: Adobe Media Encoder 2020. When I open the program, the splash screen comes up, then it crashes a few moments later. "adobe media encoder 2020 quit unexpectedly. Click Report to open the application again. This report will be sent to Apple automatically" I started a live chat with a support representative. He asked me to uninstall and then reinstall. I did that. It still crashed. Support tried taking over my screen and reinstalling it themselves but the issue persisted. He told me to restart my computer so I did. Then I tried to open Media Encoder again. The Issue persisted. Support said I need to uninstall ALL OF MY ADOBE APPLICATIONS! I pushed back and said no, I need those other programs to get my job done. Premiere 2020 is working just fine, so that doesn't make sense to uninstall that. Bad idea.  Support says they are going to escalate this to the senior support and will supposedly call me back in 24 hours. I want to note that I find it

Exporting through Media Encoder has been fine up until recently.Now whenever I export a video with audio, the mp4 output freezes a few seconds before the end. I predominantly work in After Effects but have also tried exporting through Premier to test and the same problem happens here too. When I export as h.264 with no audio, the mp4 plays through with no issues.Also I tested as a .mov file with audio and it runs through fine then too. The issue only seems to be when it is exported as h.264 with audio and unfortunately this is the format I need it in! It has only been over the last few weeks that this issue has arised. Please help! x

I have been trying to render my edit for a couple of days now and it renders a little bit and then crashes my computer ! I have tried probably like six times and it keeps happening. Does anyone know how to fix this? My video is about 58 seconds long and I've rendered videos before perfectly. This isn't the first time this has happened but never has it been this many times that it's happened.

For some reason earlier today, when I updated my apps, the media encoder did not. It only downloaded 2021. When trying to uninstall, I get an error stating that the program is still running. Yet my computer just started. The encoder is not running at all, could not find it in task manager to force quit, and is refusing to uninstall even through the direct file. And I can not open it at all.I am on a PC.It has migrated into my Premier as well now. This is killing me because I have to get this video in for my final. 

No idea what's going on here. ?????? Can anyone help? 

Adobe should develop an app that can remotely show the progress of an export through media encoder.  I am exporting a huge project that is going to take about 5-7 hours and I run to my computer to check it all the time to make sure it hasn't failed and what not. It would be awesome to get a notification when there is any activity. 

I've had no luck sending my comps from AE to AME while retaining my default render settings, in which I've selected "Length of Comp" as my time span for renders.In AME, the 'source range' always defaults to 'work area' regardless of my AE settings. This wouldn't be a problem if I could 'select all' my queued media and batch change to Entire Composition in AME, but currently this only changes one item at a time even when all are selected.Has anyone found a solution to easily change this default when working with large groups of outputs?

Hello,can you help me: AME and Premiere does not start and interrupt while loading a plugin named: "E2D6B418-2CF4-4F1A-A770-4F0FE2315564.pl" (also see screenshot) I think, that this is a ".plugin", but i can not identify it. Deleting all plugins does not help. Do you know what to do?? Thank you so much, Roland.

Hey all,I have had this persistent issue that i've never been able to nail down on my exports. I have searched through the topic, but never found a post that directly matched mine.. I have been having an issue while rendering out files from Premiere where there are scratches/glitches/artifacting randomly on my export when I check it. I have attached a screenshot below to illustrate. I have had some success with rendering out using Software only. Has anyone had any similar issues or maybe know of a fix? What might be causing this problem? Any responses are greatly appreciated! Thanks!