Adobe Media Encoder

Hello,I'm also copying my post here from the Premiere Pro forum here -> https://community.adobe.com/t5/premiere-pro-bugs/media-encoder-takes-much-longer-to-open-if-project-is-sent-from-premiere/idi-p/14620007 I remember posting this a couple of versions back but I can't remember the post's name 🙂 and I cannot remember If I posted it here or in the Encoder forums since I'm not sure this is a Media Encoder problem or a Premiere one.So, Media Encoder takes about 5 seconds to load all its plug ins when opened standalone. I have some Red Giant and Boris FX plugins installed, the number shown in the startup screen is about 400. BUT if I send the project for export from Premiere, either by pressing the keyboard shortcut or from the "send to media encoder" button in the Export panel AND if Encoder is not started it takes ages. It loads the default plug-ins first, this is also slow and then if goes to the 3rd party ones. I know this because it is so slow

Hola, tengo Adobe CC 2018Desde After Effects envío un video para renderizar al Media Encoder y queda buscando el dynamic link y de alli no sale. Alguien me puede ayudar con esto ?? Gracias !!-------------------------------------------------Hi, I have Adobe CC 2018From After Effects I send a video to render in Media Encoder and its searching for the dynamic link and it doesnt advance, therefore it doesnt render.Can someone help me with this ??Thank you !!

I have a vertical video at 1080x1920 that I need rotated 90° counterclockwise on export, is this possible though Media encoder? Thanks!

Hi Everyone,I have been a PP editior for a long time and have seen a lot of crazy bugs etc. this one has me STUMPED. So I Have a project, 2 camera interviews of 5 or 6 people cut together on 1 timeline, straight forward. When I go to export the sequence out in AME It exports out the red "media missing"  frame for the entire video every clip. All the media is showing on the Timeline and I checked that every piece of media in the project is linked to the correct location. I do not get the warnig that media is missing and there is no yellow triangle in AME suggesting anything is wrong until it starts to export and I see its the red card. If I export directly from PP all works as it should. to troubleshoot I have:1. cleared cache both through PP & AME and by hand in the assigned media cache folder and the default location PP & AME would put the media cache.2. I have un-linked and re-linked all the media for the project.3. Manually deleted all Temp files4. Moved

Hola! Como estan?Escribo porque estoy teniendo un problema en encoder. Cuando pongo a exportar un video de premiere en encoder me sale un aviso que dice "se han detectado medios sin conexion y se van a codificar mediante proxy" , luego me muestra la lista de los archivos que se supone que estan desconectados. Cuando voy a la linea de tiempo de premiere no hay ningun archivo desconectado.A alguien le sucedio esto? No se me ocurre como resolverlo

I'm trying to render proxies but keep getting this error. I'm trying to proxy gopro video files that were recorded back to back. The other files in the project were able to be rendered but for some reason this one keep getting an error. What am I doing wrong?

Hi. I get an error message whenever I try to drop an AVI file into media encoder. Is it possible to convert an AVI file to anything using Adobe ME?

  help me pls

I have problem with newest version of Adobe Media Encoder. When i want to open AME, the start creen appears, but after a while, it disappears and nothing happens. In a nuttshell, it crash. Media Encoder just doesn't launch. Everything worked fine with the 2023 version, but after updating to the latest version, this problem appeared. I have Premiere Pro on the latest version and it works perfectly. The issue only occurs with Media Encoder. I have tried literally everything, running it as an administrator, using the "create proxy" option in Premiere Pro. Nothing works. I hope this problem can be resolved because without proxies, I am stuck.

I have problem with newest version of Adobe Media Encoder. When i want to open AME, the start creen appears, but after a while, it disappears and nothing happens. In a nuttshell, it crash. Media Encoder just doesn't launch. Everything worked fine with the 2023 version, but after updating to the latest version, this problem appeared. I have Premiere Pro on the latest version and it works perfectly. The issue only occurs with Media Encoder. I have tried literally everything, running it as an administrator, using the "create proxy" option in Premiere Pro. Nothing works. I hope this problem can be resolved because without proxies, I am stuck.

I'm trying to render proxies again for the same video files from the same computer in the same project file but it keep failing. The render had no issues with the first video but the others all falied. What am I doing wrong? I've even shortened the file name to "122624 - HERO - 04".

¿Porque todo los videos que exporto desde Adobe Media Encoder se pixelean? Ya desinstale e instale el programa pero sigue presentando el mismo problema.

I can't seem to connect After Effects to Media Encoder.Running:MacBook Pro 16-inch, 2021 M1 Max 32GB, MacOS Sonoma 14.5.AE Version 24.5.0 (Build 52)ME Version 24.5 (Build 50) - When I click "Add to Media Encoder Queue..." it opens up Media Encoder but nothing happens.- When I drag a Comp from AE to ME, ME directly goes "Not Responding" and has to Force Quit it.- Tried uninstalling and installing both AE and ME.- Worked when queueing Sequence from Premiere

I've looked through the forums and couldn't find anything covering this, so I figured asking here was worth a shot- sorry if this has been asked before.I can't get Adobe Media Encoder 2024 open on my mac; it's been giving me the "cannot create folder: presets" error. I've tried a few solutions, but nothing's worked. There isn't an "Adobe Media Encoder" file in the "/documents/adobe" folder, and I don't know how to make one- manually creating one doesn't work.Do I need to make that folder again to fix the situation, and how can I get Media Encoder to open? Thanks! 

Hello all, has anyone else encounted a recent 'go slow' on media encoder?This has only happened in the last couple of weeks - I use it all the time and suddenly it is taking hours to encode 6 min clips.  Where as, exporting directly is taking 12 minutes.  very frustrating. Any advice would be amazing. Richard 

IssueCaptions are burned into video despite Export Options > Create Sidecar File being turned on Adobe Media Encoder version number24.3 Operating systemWindows 10 Steps to reproduce Export video from Premiere Pro, using Export Options > Create Sidecar FileStart export from Media Encoder Expected result There should be no captions burned into the video, and there should be an SRT file created. Actual result There are captions burned into the video, and there is also a SRT file created. NotesWhen I'm scrubbing the video in Premiere export window, there are no captions visible in the video. However, if I open the settings in Media Encoder and scrub the video, captions are on the video. 

Hi there,when I have a composition in AFX titled for example "composition15.0_test" and I send that to render to Media Encoder, the output filename automatically changes to "composition15-0" (hyphen instead of dot). Why and how can I disable this? Thank you.

Hi! I'm using Media Encoder Version 24.5 (Build 50).  In recent days, I have been trying to export a project that I have edited in Premiere, and in the shots where I have used Warp Stabilizer, it shows the 'media offline' indication in the final video. When I export directly from Premiere, this indication does not exist, and the export is done correctly.Any ideas what is going wrong?

I've read some older posts about this same problem but here we are, it's still a problem. Apparently some update back in  the day fixed it but seem to me they've unfixed it. Has anybody actually figured out how to prevent this? I'd hate to have my monitor glowing all night just to keep the render going... I've tried to look for something in ME settings as well as system settings but nothing stood out. MacOS 13.5.2Latest Creative Cloud apps

Hi,I am using Extendscript to automate rendering from After Effects projects.In the Extendscript toolkit, or through BridgeTalk, I can make the following work with AME cc:var fnt = app.getFrontend();var ech = app.getEncoderHost();var exp = app.getExporter();//The comp to be renderedvar cmp = "F:\\ProjectsAE\\AEProject.aep";//AME presets to be used (I had to copy the epr files from their original location to a simple path for this to work)var pst = "C:\\AMEPresets\\AVC-Intra Class100 1080 50i.epr";var pst2="C:\\AMEPresets\\PAL DV Widescreen.epr";//Output files without extensionsvar out = "F:\\ProjectsAE\\Render\\AEProject_Onair";var out2="F:\\ProjectsAE\\Render\\AEProject_Preview";//This adds onair preset/outputfnt.addCompToBatch(cmp,pst,out); //This adds preview preset/output for the same compfnt.addCompToBatch(cmp,pst2,out2); //This starts renderingech.runBatch(); //This deletes the queue//exp.removeAllBatchItems();The problem is that two render items are added in the batch, one for e

There used to be a Channels selection in ME that had things like (RGB, RGB+Alpha, etc.).  I can't find it (v24.5).  I've tried to use AVI, Quicktime, and a few others, but no option appears for the channels.  I do see a check box for 'alpha only', but that is not what I want.I've recently discovered I can choose a preset that states 'plus alpha'. I ended up using Quicktime and a profile with alpha. Oddly, I couldn't find it for AVI, and that is what I've used in the past.Note that even when I choose the profile with alpha, I still don't see a specific setting that is tied to this. I'm still curious if I am missing something obvious, as removing the Channels option seems odd.

Hello, I have a 30 fps video, but the media encoder changes it to 25 fps, how can I make it 30 fps?

I have been trying to export this visual I made on media encoder, but every time I try, it comes out low quality, although the original footage I used was 4K quality. Attached is the original video, my edit, and my export settings. This also seems to be a problem during playback in AE as it also looks to be low quality, so is it something to do with effects making the video lower quality? I think it may not be the exporting being the problem but the effects, but why do the effects make the quality lower and how can i fix this, or is it the export settings? 

AE 2022+ME 2022imported aep. into ME successfully without any link issue but the compositions didn't show up as expected, as you can see, nothing's listed in the window. It's a complicated project, but i waited for several hours and nothing showed up still.Same thing happen on the AE side, only even but the import-window didn't show upAny help is much appreciated!!!Tx

After editing a 12h01m long project and trying to render it, after 5 hours of processing Media Encoder reports an error and fails to encode the mp4 file.This is the error that I get in the logs: ------------------------------------------------------------ - Encoding Time: 04:57:40 06/09/2024 02:23:39 AM : Encoding Failed ------------------------------------------------------------ A low-level exception occurred in: H.264 (Exporter:9) Export Error Error compiling movie. Export Error A low-level exception occurred. Writing with exporter: H.264 Writing to file: D:\main.mp4 Around timecode: 00:00:00:00 Component: H.264 of type Exporter Selector: 9 Error code: 3 ------------------------------------------------------------ I noticed that the timecode is 00:00:00:00, so I ran a test and rendered only the first 30 seconds of the project instead of rendering all 12 hours. Media Encoder rendered everything, and the exported video was fine. So there's nothing wrong with the projec