Adobe Media Encoder

I have 2 Versions of the Media encoder one of 2021 and one of 2022, (two different programs on my pc) both need round about 2.5 GB and i need more space on my pc, so can i uninstall the older version or do i need both versions to run photoshop, lightroom and the other programs?  

A client wants to send raw broll to the customer but wants to remove the camera audio track. Is there a way to do that for hundreds of files without adding a layer of decompression/compression? Almost like copying the files without audio? I know it's a shot in the dark. As an alternative, is there a way to make sure the recompresed video is as identical to the original as possile? Thanks for any help.

Non parte la coda di rendering dopo aver aggiornato con Adobe 2023 da Premiere a Encoder.

Okay so I'm fairly new to this but I've been trying to reduce some video file sizes. I accidentally recorded in too high of quality and my 3 minute video is almost 2 GB. No matter which video I load into the encoder (I've now tried with 50+) as soon as I start within the first 10 seconds my screen goes black, the AME icon turns green as if I have a pop up, but instead of getting a pop up it goes away and my encoder stops. Every time this happens I have to restart my computer to get AME to even start encoding. Someone please help I've searched every crevice of the internet and can't find anyone with this same problem. Someone please help I have deadlines to meet and depend on Adobes software.

I have this problem when I try to render from AE to AMEThis error is displayed Encoding time: 00:00:1605/17/2022 04:43:04 PM: Encoding error-------------------------------------------------- ----------export errorError compiling movie.processing errorProcessing has returned an error.Writing with exporter: H.264Writing to file: C:\Users\Desktop\Comp 1.mp4Writing file type: H264Around timecode: 00:00:00:08Processing while scrolling: 0.000 secondsComponent: H.264 of type ExporterDial: 9Error code: -1609629695  I tried:- Update video card drivers- Install and uninstall AE and AME- Clean cache- Change Mercury Playback Engine CUDA processor to Mercury Playback engine- Increasing maximum disk cache size.- Disabling (deselect) enable hardware accelerated decoding (requires restart)- Purging the hard drive to have at least 200 GB free- Manually clearing the entire cache of the computer.- sending to AE queue and from there send to Media Encoder queueI tried:- Update video card dri

My video was a few minutes into rendering, then I decided to do some Googling about previous errors. As soon as I moved my mouse... CRASH!!!Just been back to check after typing that, and the progress clock is still frozen. This software is an absolute NIGHTMARE

Sometimes you just get a mix of footage. Then I want to make proxies.My footage is:8192x43203840x21604208x3160 with pixel aspect of 2.0 4096x2160....Well, you get the idea. There are several aspect ratios that end up in a project. I'd Like to create all of the proxies somewhere around the 1280x720 size. But right now I need to create an ingest preset for every single aspect ratio I've got? No, Adobe wouldn't be so dumb as to not give us the option to have the proxies match the aspect ratio so that they aren't stretched would they? Because that's what happens if you just use the default. I'm also trying to share proxies online, so I'm stuck with H.264 and I'm lowering the target rate to 10 Mbps. I found that was a good balance of size when sharing proxies over oneDrive, but still giving you something Relatively tolerable if you need to render out a preview and don't have the footage. Is there a trick to making presets that will resize and keep the aspect ratio of the original?

I've noticed that Media Encoder uses CPU to export, but at 100%, all of a sudden the hard drive spins up, and stays active for several minutes before the video file is ready. Is it common for Media Encoder to sit at 100% for several minutes while the hard drive does this? It almost doubles the export time as a result. If it takes 7-8 minutes to render, it then takes several minutes at 100% before completing. Thank you for your input!

Hi, Im trying to  render out a hyperlapse i did in AE, the photos/composition ended up being 4000x6000 . when i render out in ME it tells HW rendering not supported on my gpu. Why the limitation? Its an 8Gb RTX 2070. I thought i'd render that high and then i will do zooms and effects in premiere pro and export at hd eventualy thanksJ

I exported a 35minute project using adobe media encorder and after playing the exported clip there was only sound for like 5mins, the rest of the sound was missing but there is audio in the timeline and it is audible when it's played from adobe premiere pro  My PC specifications: OS - Microsoft Windows 10 ProCPU - Intel(R) Core(TM) i5-4690 Ram - 16gm ddr3 GPU - gtx960 How to fix this? I use Premiere Pro 2019 and Adobe Media Encorder 2019

When I ask in After Effect to export and add to Adobe Media Encoder queue, Media Encoder opens but nothing is added to the queue, my work cannot be exported! I work on Mac Studio and the 2 software as well as Mac OS are up to date.

Adobe Media Encoder v22.6 is now available for download from Creative Cloud desktop app. This update includes important bug fixes & is recommended for all users.   List of issues fixed in v22.6 Fixed an issue where if you try to create proxies from interpreted clips, Premiere Pro sends the clips to Adobe Media Encoder flagged with their original frame rate. The resulting proxy is out of sync with the interpreted footage. The export sequence API call returns false when the provided sequence name can not be found in the project. Audio missing from AVCHD spanned clips with AC3 audio (macOS only).   Complete documentation New features Fixed issues Known issues

Hello,I was using ME to format a bunch of videos that have very specific specs:Video - Bitrate range, Codec High Profile levels, loudness normalizer settings, and all are good. The one thing that doesnt hold is the AAC codec which is requsted. When I choose it and select 192 kbps, that value changes when I check the final MP4. Its aroundf 188, which fails the publishers needs.  If I choose MPEG instead of AAC, I can hold the value at 192 when testing. Can someonbe help me figure out why I cant get the AAC codec to stay at 192 after the file compresses?Thanks in advance for anyone that may be able to help here.Cheers,Babs 

As my subject line says, I updated to 22.4 and now I do not have the option to "Interpret Footage" (it's greyed out) after I send my footage from Premiere Pro to Media Encoder. If you aren't familiar with the 120FPS workaround, I interpret 120fps footage to 23.976 in PP and in ME so I avoid the 60fps issue. I have now downgraded to (22.3.1) until there is a solution. Really hurts my workflow.

Hi all,I'm trying to export an After Effects project as an mp4 (H.264), but at about 90% complete, it will fail. I'm completely lost as it's the same settings I always use to export.Here's the Error Log I got: ------------------------------------------------------------- Encoding Time: 00:39:1710/10/2022 03:56:48 PM : Encoding Failed------------------------------------------------------------Export ErrorError compiling movie.Render ErrorRender returned error.Writing with exporter: H.264Writing to file: \\?\D:\Sample Videos\Tests\True Justice\True JusticeBETA2.mp4Writing file type: H264Around timecode: 00;00;42;20 - 00;00;43;06Rendering at offset: 42.709 secondsComponent: H.264 of type ExporterSelector: 9Error code: -1609629695------------------------------------------------------------ Both AE & AME are the 2020 versions and I'm using Windows 10 Thanks in advance

Hi.  Using AE beta daily on M1. It's been great.  Only issue I see which isn't much is a little lag in the timline when selecting all.  Typically to reset layers to all unopen I will hit command A then hit P twice to select position adn once to reduce everything.  in regular AE this would just happen instantaineously. On M1 beta, theres a second or 2 lag in returning all to miimized.  Can ME beta be set to the default app when exporting from AE?  When I export from AE the legcy version of ME always opens by default.   Thanks.

Media Encoder tells me im running low on diskspace, and that i have to free at least 1GB, but i have 80 GB free diskspace on internal harddrive, and 400 GB on my portable where the video-footage is. there are no partitions on my disks. Anyone else have this problem?

I made a few homemade videos while on holiday and edited them with Premiere Pro and After Effects.  I used Media Encoder to to allof the rendering. I used Premier Pro first and rendered that into a Quicktime Movie and them finished it up in After Effects. For Comparison, renvered the final version into both Quicktime and H264. The settings for both Quicktime Renders (After being finished with Premiere Pro and the final item) are the same.  Both used 59.94mps, 1080p, which matched the raw data.  I used the Apple ProRes 422HQ CODEC, which did not allow me to modify the bitrate, so I assume it keeps the original. For the H264 version of the final video, I used the same CODEC, Apple ProRes 422HQ but downgraded the frame rate to 29.97.  I used a 2-pass Bitrate, with the ideal at 10 and the max at 15. The final item is about 8 mins long.  Playing them side-by-side I saw extremely minimal difference.  I paid atttention to the colors and c

Hello,I've tried more than 10 times rendering a particular video from Premiere, and each time the same problem happens: the render stops at random times, from 1/2 way through to 3/4 through. The progress bar just doesn't move anymore. It usually takes a while for Media Encoder to actually stop the rendering, then it gives different reasons and different timeframes for the bug.I've tried exporting with Premiere several times, but same thing. I've already un-installed re-installed Premiere but no difference, currently doing the same with Media Encoder... After having searched on the forum, I tried deleting the particular frame mentionned in the error message, didn't help; also tried leaving it render with absolutely nothing else oppened on my pc, so it had maximum power, didn't help either.Any suggestions?The video is ten minutes long, rendered at rather low quality, should only weigh 28 Mo's.Thanks!

Hey there, So I recently upgraded to the latest version of CC and I am trying to render a project via Media Encoder as a H.264 file and the program is struggling to make the dynamic link to the project. If and when it finally does, the render freezes. I have deleted and customised momory and cache. I've restarted the computer. Checked that all apps were upgraded and the problem still prevails. I did manage to render the composition as an .mov in the native rendering system of After effects, but its not nearly as seemless as using ME. Would love any further assistance. I work on an iMac 2016 model. 32GB memory. Quad Core. Graphics AMD Radeon R9 M395 2 GBThanks!  

HiI'm running PP and AME 22.6.1 on Mac Monterey OS.I'm not able to export with Media Encoder. The queue gets stucked without starting the exporting.    I already tried to uninstall ad re-install PP and AME. I already tried to check privacy privilegs. Thanks for any help.

I've encountered a strange bug. I have captions and an After Effects lower third on two different tracks on a timeline. Using Mac OSX 10.13.4, AME 12.1, Premiere 12.1.If I render out of Premiere, no problems.If I send to AME and try to render, the caption track renders as "Media Offline".If I delete all content such that only the caption and the AE clips exist, the caption track renders as "Media Offline".However, if I delete the AE content (turning off visibility doesn't do it) then the captions will render normally in AME.It doesn't matter where on the timeline the two are; if both the captions and the AE clip exist together in the sequence, the captions will render as "Media Offline" in AME. Very weird.Manual fixes are difficult because I have 50 or so timelines to render.Anyone come across this?

Hi,I use dell ailenware x15 laptop, with i7-12700H / 16GB Ram / 3060ti for laptop / windows 11I'm redering some video made by after effect using media encoder, but only 4 Threads usage near 100%, others average is 10~15%.CUDA accelerate enabled.Why they're not working?How can I use all thread for render?

Hi,for a few days now, every time I export an after effects project in adobe media encoder in H.264 format, the export stops at the very end of the export and doesn't advance any further.I don't understand why. It's a very simple video, in this case a video of barely 20 seconds and very little power. In the attachment, the export was blocked like that for 2 hours Would you have a solution?Thanks a lot.

When I add my project from After Effects to Media encoder, Media encoder opens but does not show my project in Media encoder queue and when I add my project manualy by hitting + , it asks me about the compositin file and after that it renders the project without the footage videos!