Adobe Media Encoder

Добрый день, у меня была ошибка с самого начала работы с ME при рендеринге видео, также не удается получить видео при рендеринге в AE!

Hello, i have a 7 hour movie which takes about 16 hours to render to you tube H264 codec. Now i have split the edit into two shorter ances like 3,5 hours each and the render times are only 2 hours each. I am wondering why the render time becomes so extremely long with the longer clip, is that maybe because of to little harddisk space to render the long file?Source matterial 1920 *1080 mp4Hardware macbook pro i9 64gb ramOutput coded youtube full hd Sequense has some after effects clips with dynamic link, not heavy just some moving titlesThanks

Media Encoder render 24bytes ! no matter what i doCan you help me if you find a solution?yarinalushgd@gmail.com

I posted this earlier to "Discussion", but it is in fact a bug report. Panasonic Varicam 35 camera's can record in Cinema 4K in 25, 50 and 100 frames per second. The clips recorded at 100fps are not displayed/rendered correctly in Media Encoder and Premiere Pro.  The image is squeezed vertically and half the frame is green. In AME 22.6 it still works like it should. I'm on a Mac Studio M1 Ultra, Monterey 12.6.2, AME 23.1. More info on the video files: Image Size: 4096 x 2160Frame Rate: 25,00 (this is in Premiere, the recoding framerate is 100 fps)Pixel Aspect Ratio: 1,0Alpha: NoneWrapper type: MXF OP1b (type: SingleItem GangedPackages MultiTrack Stream Internal)Compression Format: AVC-Intra100, MPEG-4 AVC/H.264 Intra ProfileFile generated by: Panasonic, P2 (3.0) AVC Unconstrained BitstreamFormat: Sony P2 MetadataDevice manufacturer: PanasonicModelName: AU-VREC1G Info about the recorder: https://na.panasonic.com/us/audio-video-solutions/

When I export video with media encoder 2023, no matter what preset is used, as long as the rendering is in the Chinese folder, it will export 24bit non-playable video.

Hey there, so I am having an issue with trying to make video clips out of a mov file that has tracking data embedded into it (for a AR related project), however when I export out a clip this data is not there anymore. The inital file was recorded on a Atomos Shogun, which primarir;lly uses  Apple ProRes and Avid DNxHD/DNxHR codecs. I dont know if theres a setting I'm missing but if anyone has any ideas I would greatly appreciate it Thanks in advance

Pretty major bug in Media Encoder v23.1 (build 81) on both Windows and Mac. If you batch export a bunch of interlaced timelines from Premiere, even if everything is set correctly, the resulting file will have bad deinterlacing applied to it. If you click into the export settings and hit OK, the correct interlacing is set, but you must do that for EVERY ITEM in the batch list in order for the exports to be done correctly.This is a huge pain for our project, which deals with 51 eps of interlaced video. 

I obtain always a ME2023 crash when adding many (30+) timeline to render dragging directly from premiere pro. It render the first ones but I experience a progressive slowness between one to the next till crash. It's like a memory progressive saturation. I assume the program is not able to relase the memory when done each work before loading the next one..  Has someone esperienced the same and solved this issue?  My system has W10 64bit - I7 processor, Asus Gtx1070,  1tb SSD and 32Gb of memory.  Thank you for your reply.

why -1609629695 error 

Hello there, I have a problem after the latest version of media encoder, I got this error after ending the time of render the video : File importer detected an inconsistency in the file structure of offer 3_2.mp4. Reading and writing this file's metadata (XMP) has been disabled.Adobe Media EncoderCould not write XMP data in output file.I found that every time this happen because the Ae file folder path have arabic folder name, this is the first time I face this problem, I hope any one know how to solve it cause I cant change all projects folders names :(.

Hi all, I discovered a bug, neither AE nor Media encoder generated promer mp4 file. It is some muxer problem, because audio and video parts seems to be OK, but the result is only 24bytes mp4 with no data inside. And I also discovered the reason..It is only in case, when some national specify characters in filename structure are present. example: Folder "Živý kraj" is not acceptable for Encoder or AE. After renaming folder to "Zivy kraj" is export OK.It worked with all characters in older AE version..

when rendering a sequence with a essential graphic mogrt, it is not rendering right in media encoder.When rendering straight out of premiere everything is right. The mogrt has a simple expression with a slider that is used to change a number shown in a lower third. Media Encoder seams to ignore this expression and instead of showing the right number it shows 1 every time the lower third is used.

Hi there,I have premeire project to render and i have jsx file which contains below contents to queue in media encoder./////////////////////////////////////////queue.jsx/////////////////////////////////////var ProjPath="\\\\192.168.150.8\\AB_Matte_Renders\\CBSE12MAT11\\AHB\\PP\\CBSE12MAT11ST006IA009.prproj";var presetpath_4k="\\\\192.168.150.8\\AB_Matte_Renders\\PP_automate\\presets\\4k_ahb_cbr75.epr";var outpath="\\\\192.168.150.8\\AB_Matte_Renders\\PP_automate\\out\\myout.mp4";var guid="aa14ef49-55e8-4034-97ac-282aad4d564a";var format="H.264";app.getFrontend().addDLToBatch(ProjPath,format, presetpath_4k, guid, outpath); ////////////////////////// Now am using bat file below to queue in media encoder.////////////////run.bat//////////////////"C:\Program Files\Adobe\Adobe Premiere Pro 2022\Adobe Premiere Pro.exe" --console es.processFile "queue.jsx"///////////////////////When media encoder is closed and run the bat file it works fine and queues it.When media encoder is already

Ich kann mit der Media Encoder v23.1 keine Videos mehr rausrechnen. Es kommt immer dieser Fehler: Datei mit Warnmeldung codiert------------------------------------------------------------Der Datei-Importer hat eine Unregelmäßigkeit in der Dateistruktur von Teaching - Kommunikation & Sprache finden_1.mp4 entdeckt. Das Lesen und Überschreiben der Metadaten (XMP) dieser Datei wurde deaktiviert.Adobe Media EncoderXMP-Daten konnten nicht in Ausgabedatei geschrieben werden.Mit der v22.6.3. geht noch alles. Aber ich möchte nicht alles in Premiere nochmal machen, seit ich dort auf v23.1. upgegradet habe.Hat jemand einen Tipp?

Every time i try to export my animation into an mp4, media encoder says it just fails. every single time. I've tried to look up a solution but none of it has worked. It just says on the side that it's failed and I get an error screen in adobe animate that says "Adobe Media encoder failed to encode, please check the status in Adobe Media Encoder queue for more details!" but I have no idea what that even means, if it doesn't mean looking at the literal queue in Adobe Media Encoder. Help 😞

When I send my project to media encoder to render with After Effects, Media Encoder adds it to the queue twice. I have to delete one of them each time. 

I just updated to Media Encoder 23.1 (build 81) and was hoping the rendering bug for 100fps Varicam clips would be fixed. I'm sorry to say it is not. The image is still vertically squeezed and half of the frame is green: I'm on a Mac Studio M1 Ultra with Monterey 12.6.2.Hope this gets fixed soon! I'm happy to provide sample files.

So since After Effects 2023 performs very poorly I found a solution in this forum to downgrade to version2022. But on the other hand, AME 2022 has major issues with sound encoding for H264 which I only realized after rendering a bunch of vidoes. I see that people reported the same issue a year ago and it's still not solved. So the solution is to render in AME 2023. However, it possible to add a composition from After effects 2022 to Media Encoder 2023? I am getting a message can connect to dynamic link server. These are not small bugs but rather huge issues that Adobe is not solving and it's honestly very dissapointing and annoying considering that Adobe is not cheap at all!

Whenever I try to create a proxy, ME starts working and then just stops after a while. No crashes, no freezes - it just stops doing anything. I can hear my CPU vent slowing down and the CPU usage goes down to 0%. ME doesn't crash, it's still functioning and I can pause the encode. The really weird thing about this is that this only happens when I try to encode proxies. Now I only recently learned about proxies and I never used them before so I don't now whether this is a new issue. Maybe it never worked on my system. Encoding videos (normal export) still works finde. It's just the proxies that don't work.

I have seen that users reported this and the "solution" was to update the version. I updated both After Effects and the Media Encoder to the latest versions and the issue still exists. The sound quality is awful. Is there anything happening regarding this problem? Is there any solution? Thanks

Recently I delivered a series of videos to a client, and the audio didn't pass their QC software, but I haven't quite pinpointed why.I exported the videos as H.264s with the audio as AAC, 48000 Hz, 320kbps, but they're claiming that the files are 41000 Hz and 128Kbps. In quicktime, it shows the files as 48000 Hz, and I double checked the preset I used and it says 320kbps. My guess is that media encoder is doing a variable rate, so the kbps occasionally drops below 320Kbps and it flags their QC. Does that sound right? If so how do I make it constant? I don't see an option anywhere.I also can't find any Mac software that will preform a QC on the files and show the audio bitrate. Does anyone have any recommendations? Thanks.

Hello everyone,I was rendering videos normally just a few minutes ago, all normal till now when AME doesn't react at all when I click Add to Adobe Media Encoder queue. AME opens up but the file doesn't show up. What should I do?Thank you in advance!

Hi! I'm currently in the process of converting thousands of videos to Animated GIFs using AME. These videos are 1:22 minute long. I'd like to just render 8 secs of each video as they are looping anyway. Is there any way I can adjust the time code faster than adjusting them one by one in the custom preset menu? 

I have an issue encoding to H264 MP4 using ME version 15 (2021). It does not completely encode the full video, while the rest of the video is just a frozen frame. Happens with all methods - dynamic linking or encoding a high res media directly on ME. Installed version 14.9 and it works fine.Hope Adobe can look into an update soon to fix this. Thanks.