Animate

It seems to be stuck in the smallest possible setting, and i've absolutely wonked out my workspace just trying to resize the thing. What am i missing? I've included a video of what i mean

Hi there,I have checked a few posts about controlling the timeline with a slider but I am afraid they may be a bit too advanced for me.Would anyone recommend a post or a resource which explains the simplest way to have a slider that controls the timeline.Just the simplest case.Thank you in advanceB

so I know that there are people who actually managed to solve the error but for some reason a little while ago the sounds that I put in the animations didn't even make the sounds with the lowest pitch, and I already tried to use the tips that people gave to others but it didn't help much, I tried in Adobe CS6 but it had the exact same error, help me please I've been trying to find the solution for more than 2 days

when ever i try to make a pen stroke, it keeps on lagging at the beginning of said stroke and when it finally does do a curve theres this line at the beginning. And if u also hold on for more than a second, this weird loading thingy pops up and when you finlly let go these options like, "paste in center" comes up, please help!!

This issue just recently started, and I am not sure what changed, but when I try to export an MP4 file from Animate, Media Encoder gives me this error message: "Could not create the output. Please check if the output is read only or locked."Please help! 

I am trying to play music by downloading the music file uploaded to the server.Given the actual results below, which of the two affects server traffic?I have no way to actually test it, so I'm asking. 1. url file size => 4.2MB2. url loaded bytesTotal => 1.2MB thank you

Hello,i have a problem with the cursor( top_right cursor on time line, with 2 triangle).The cursor  is moved to its maximum.But When i use a animation or a video tha's exceed 13 sec, i can't see ALL the  compostion withotu move the bottom bar in the timeline.So, Can we change the maximum value of time visible on the screen in the timeline ?it's very painful because I take a lot of time if my video is long to move me from point A to point BI dont have this problem in after effect.Thank you for your answers

Bonjour.Question toute bête puisqu'on peut le faire avec les autres apps Adobe : comment scinder la circonférence d'un cercle (ou comment dessiner un quart de cercle). Je me sens bête mais je piétine, alors je pose la question...

Une brosse imite le panache d'un avion acrobatique et grossit tout en se diluant dans le ciel (la dilution n'a pas été appliquée pour les captures d'écran). Un segment droit ne pose pas de problème, il est transformé, agrandi et un masque permet de n'avoir que la partie "utile" (captures d'écran).  Mais l'avion effectue des courbes et des cercles. Et là, impossible bien sûr de grossir le panache sans ouvrir le rayon (ou diamètre). Sauf si vous avez une autre solution, il me semble que la seule est d'utiliser une brosse vectorielle qui permettra de grossir le motif sans toucher au rayon (ou diamètre).Animate permet-elle l'utilisation de brosses vectorielles, et quel est le suffixe du nom de brosses vectorielles utilisées? L'app Capture génère-t-elle des brosses vectorisées compatibles avec Animate?

I'm trying to export (save) the color panel with Tagged Swatches. For some mysterious reasons, it only saves the normal swatches, but not the Tagged Swatches. Obviously we are in the 21st century, and I am a bit baffled - what's the point of having Tagged Swatches, if you can't reuse them in another file?!thanks.

Is there a way to activate the RGB color picker that was previously in Flash? Similar to the one that's in Photoshop? The current one is just unusable to me.

My screen width is 800.In the onPressMove function, I first set the range of ball's movement on the X-axis between 20 and 780.I want to change the frame of car to 0 when the ball's position is { top: 1, right: 20, bottom: 1, left: 685.5 }, and change it to 1 when the ball's position is { top: 1, right: 114.5, bottom: 1, left: 590.15 }.My ball can move now, but car not change the frame when ball move to the specific region.Could anyone tell me what's wrong?car have a lot of frame inside. var root = this; var ball = root.ball; var car = root.car; function main() { createjs.Touch.enable(stage); stage.mouseMoveOutside = true; root.stop(); ball.hitFrame = 1; ball.missFrame = 0; //ball.dropArea = { top: 1, right: 20, bottom: 1, left: 20 }; ball.stopCar0 = { top: 1, right: 20, bottom: 1, left: 685.5 }; ball.stopCar1 = { top: 1, right: 114.5, bottom: 1, left: 590.15 }; ball.stopCar2 = { top: 1, right: 209.85, bottom: 1, left: 495.35 }; ball.on("mouse

I am to animate software.can I replace the adobe illustrator file in Adobe animate, where my changes in Ai file update automaticlly.

I created a project in Adobe Animate. The animation and sounds work well on the timeline. But when I test it, you can't hear any sounds until several seconds into the animation. Like the video was muted and you unmute it. Then if I publish the project and I open the HTML file, some of the sounds won't even play. What am I doing wrong???

Bonjour. Je vous joins une image, ce sera plus compréhensible.  Le quart de courbe et la droite sont des instances de symboles. Elle représentent un panache de fumée et celui-ci doit grossir et se diluer (je n'ai pas appliqué la dilution sur l'exemple) au fur et à mesure que l'animation progresse. Pour les droites, je joue sur une des deux contraintes longueur/largeur, mais pour une courbe d'un huitième, deux-huitièmes ou trois huitièmes de cercle, dont le diamètre ne varie pas (sauf si on peut faire autrement) , je ne vois pas comment procéder, à supposer que ce soit possible...  

Bonjour.La question a été posée en 2017, contournée à l'aide d'une manipulation dont la vidéo n'est plus en ligne.Il suffirait que le centre du cercle entier hypothétique (puisqu'il est question ici de faire pivoter/tourner un quart ou demi ou trois-quarts de cercle) soit au bon endroit pour que le quart (etc) de cercle pivote correctement. Comment forcer le centre à être au bon endroit?

Hi, I work as an animator, and have been working with Flash for years, but lately I've been having a huge problem with the audio. Sync mode is set to Stream as it should be, but I can no longer hear the audio as I'm dragging the cursor through the keyframes. It's very important, since any animator can attest that there is no way to accurately create stuff like lipsync without hearing each individual keyframe. I don't know what started the problem, but it feels like it's completely random. Sometimes I can hear it, sometimes not. Same goes for testing the SWF movie, sometimes it plays the audio, sometimes it just starts the animation but no sound. Please help me elucidate this very frustrating problem. Thank you in advance!

Hello everybody,I have the following problem:When I select a layer/object and move it, a part of it changes color. It is the same for all of the frames in that layer bot not for other layers. As soon as I move it, Adobe Animate changes the color of the one random part.I even tried moving part of the layer/object, and it just seems to happen, when I move a certain part of the ObjectIn the Menue where you see the Working steps it just shows the moving of the object, not that it had filled in any color.It just happened today, and never had happened in any other project.I also never changed any of any settings. I've been using Animate like this for quite some time, and never had trouble with this. Things I already tried:Reopen the projectDeinstalling Animate and reinstalling itChecking if I have the newest version (23.0.2) I am unable to move that layer/Object now, without it changing color.Does somebody has a solution for this?Thanks in advance! 

I Have a Little Trouble When i Realise The Music Background Wont Stop  When I go Minimized this app, anyone know to mute sound when minimized ?

Hi everyone, I'm pretty new to Adobe animate, but have been using Photoshop for quite some time. I've been trying to animate this retro loading bar in Adobe animate (probably not the most efficient way, but it was working alright) when I got to the last couple of "blocks" of the loading bar, I started having a white background appear on the shape. The same image I have used for all the other layers, which have no problems.  The strange thing is, the white background only moves up to a certain point, almost like there is a layer mask or something going on. I've tried undo-ing but that didn't seem to fix anything. I'm pretty stumped on what the issue is, its probably something super simple, but I'm very unsure as to what it could be. Any help is greatly appreciated! 

hi, could anyone help me figure out what happened with my audio?i have audio files with enough, not that bad, audio quality.when i add to Animate it sounds rather wierd like compressed, and then when i export it, it still sounds that bad.i compare them by played in Media player, wow, the quality between the two really different.although our studio new with Animate, but it seems just new problem that we never face before. if you wanna know, i attach all 2 files, samples original audio and rendered mp4.

Adobe Animate has been repeatedly crashing and I would like to allocate more of my 32 GB of RAM to it, however I cannot find how to do that. Please assist.

lets say its a happy face symbol and its moving to the left...and in one frame I want it to wink but...still moving ...who can I do that?----I create new frame...or ...change the symbol from the inside? how can I do that in just 1-2 frames and the symbol keeps moving.

Alguém poderia me ajudar??? Gostaria de Exportar minha animação como um vídeo H.264, mas gostaria de fazer o loop para um determinado frame (492) não para o início novamente, já tentei inserir action no último quadro gotoplay (492) , mas quando exporto o vídeo ele vai para o início.O vídeo está um pouco lento porque estou tentando editar com o Premiere e sonorizar, com locução também.O Loop que quero é "Venha falar conosco"

Hello, I'm trying to help a student. For some reason in one of her projects, the frame properties tab is missing most of the panels. Label and Sound are there but the rest are missing. I' tried resetting the workspace, restarting Animate and a bunch of general rummaging, but no luck. Her other projects all seem to be working normally.  I've tried searching but I'm not seeing anyone that has the same problem. Help!