Bridge

So this sometimes I've always had a problem with since using bridge 10 years ago to this day, and that it that the zoom goes from 0% to 100% to 200%.These increments are too large to see your image. If you have a fairly small resolution image like 2000pixels x 2000pixels maybe its not too bad, but when you go above that the zoom is too extreme.Like for example if I have a portrait and I'm trying to zoom in on the head, it zooms all the way to the eye instead. I cant get a good look at the head from bridge.They give you zoom options in Photoshop. Like when using a filter such as the liquify or Camera raw, lens corrections, ect... the zoom options are 6%, 12%, 25%, 25%, 33%, 50% 66%, then 100%, 200%, and so on. Also they give side options to "Fit to View" +, and - .Image if your only zoom options for liquify were 100% and 200% like bridge is,  you couldnt use the tools if they were. Seems like it would be a very welcomed and not too hard change to add.Thank you!

I pretty much use Bridge for one task: sorting through and previewing assets I have collected into a single folder. The folder in question has tens of thousands of items, all of which are meticulously tagged with keywords. The hundreds of keywords are sorted into folders and subfolders so I can find the keyword I need quickly. But the problem is if I want to see everything tagged with a specific keyword, the fastest way to do this seems to be to filter the folder by that keyword. However, if I go to the filter panel and sort by keyword, it lists every single one of my hundreds of keywords alphabetically, regardless of whether those keywords are in subfolders. This means that if I want to look at every file tagged "owl," I have to scroll through hundreds of keywords to reach O. (Instead of going in the Keywords panel to Animals>Birds>Owl, right-clicking, and hitting Find.) Another issue might be if I don't quite remember what the keyword is. My keyword structure might be

I am using CS6 Brige in Windows 11.  Menus and icon are too small.I found a fix for Photoshop but it does not work in Bridge.        

I have recently started using Bridge 2020 on a MacBook Pro High Sierra (coming from the old Bridge CS5).  There are a number of degradations in the new Bridge 2020 and I can't see what's actually better - overall it seems to be clumsy port of the old bridge which worked rather well.  I shall create a different thread for each problem. I have lots of external drives which I plug in and out as and when needed.  An intrinsic problem of Bridge (even under the old version) was that if you create a shortcut under Favourites to a volatile directory (like an external drive), if you click on it when the directory is not available, in its wisdom it decides that it needs to remove the shortcut!! In order to get around this annoyance I had created a directory called "Switchboard" on my MBP and in terminal, I had created symbolic links to the said drive's target directory, (ln -s /Volumes/blah/photos ~/Switchboard/blahPhotos). I would then add Switchboard to my favouri

Hi, Don´t work with bridge alot just a few times a year of chagnes sizes of multiply images for websites. But now it was time. When i open it, it runs fine but when i´m starting to select folder, images and so on it freezes and the program crashes. I have tried following: UpdateUpdate creative cloudUpdate other adobes programsReinstall Bridge / install againReinstall bride, restart computer, use a "cleaner program" that i found as a solution on google. Nothing works same problem still. I run a pc, windows 10. Bridge version 12.0.3.270What can i do? Thanks! 

Make possible to disable putting "Photoshop thumbnail" to files when converting RAW's to TIFF.Photoshop thumbnail is pointless junk metadata and some softwares like GIMP can't handle it correctly. Actually nobody needs Photoshop thumbnail and it's like junk metadata...

Why won't bridge allow me to rotate my photos? I have rotated images before using hotkeys but now it won't allow me to??

Me es imposible abrir una imagen en Camera Raw desde Bridge. Me indica en un pop up que "la edición de Camera Raw no esta activada. La edición de Camera Raw requiere que un producto determinado tenga licencia"Nunca me ha pasado esto. ¿de que se trata? ¿como se resuelve?Gracias

Is there a way to make batch rename not force me to scroll all the way back dwn to where I left off after renaming a bunch of files? Every time I use the feature it resets me to the top of my folder, and I have to find my wa yback down to where i left off.

Bonjour à tous,Lorsque sous Bridge j'utilise la commande Ouvrir dans Camera Raw, le message suivant s'affiche :La modification à l'aide de Camera Raw n'est pas activée.La modification sous Camera Raw nécessite qu'un produit éligible soit sous licence.Et lorsque j'utilise la commande Ouvrir, Camera Raw se lance correctement.De la même manière, je reçois le même message lorsque je tente d'utiliser Paramètres de Camera Raw.Ces dysfonctionnements se produisent depuis la dernière mise à jour de Photoshop (septembre 22). J'ai désinstallé et réinstallé Photoshop et Bridge sans succès.Merci pour votre aide. 

Why has Bridge 12.0.3.270 suddenly stopped displaying thumbnails for my Canon CR3, Nikon NEF RAW files, and TIFF Files. Displaying JPEG and MOV has no problem. Win 10 64 Bit operating system.  I have reset Bridge Preferences but it still doesn't work.  I also uninstalled Bridge but it behaves the same.  Please help ! 

En este video https://www.youtube.com/watch?v=ytv6t6Dhwso hablabais de un panel en Adobe Bridge para hacer una auto-tagging a una o multiples fotos. Esa herramienta sigue sin estar disponible y seria de mucha utilidad para todos los usuarios de Bridge y Lightroom. ¿Para cuando podemos tener disponible ese panel?

For months we have plagued bij freezing and crashes. Happens everytime apple has a new update, the fixes proposed don't work. Its goid for awhile and then its back. This is not a post for specs or solutions. This is about getting an answer when this will be fixed. Impossible to work!!! 

I'm running Bridge 12.3.3.270 on MacOSMonterey 12.5 and it will not search the subfolders of an external drive - the folders that contain the actual images.In 'Find' the 'Include All Subfolders' is checked so that's not it.The dropdown in the top right corner is set to 'Bridge Search: current folder'I can double click on any folder on the drive and the images appear without a problem. Their keyword data is all there. But If I search by keyword, Bridge returns zero results. It appears it is not reading the contents of those folders.I've seent this problem covered many times in the Support Community but it seems the same silly solution is offered up - "did you check that 'Include All Subfolders' is checked. Any other suggestions?

2 Probleme  noch immer vorhanden, auch nachdem ich Bridge komplett deinstalliert hatte:a) Unter Optik-Profilkorrekturen "Objektprofil kann in Camera RAW (v 14.0.1) nicht geladen werden" , auch die Marke Nikon erscheint als "ohne" Anhang 1+2).b) Wenn ich aus der Bridge mehr als ein jpg-Bild auf einmal in PS öffnen möchte, fehlt die Option "Öffnen mit...'", es wird nur "In Camewra RAW öffnen" angezeigt Anhang 3)    Ich habe die neuste Version von Creative Cloud. Freundliche GrüßeHeinz Hehenbergerheinz.hehenberger@aon.at

Hello everyone. I recently made a much needed update to my computer and adobe software. I recently purchased a new imac running the latest version of catalina and purchased the photography package from adobe. When I open bridge and try to preview Raw files (CR2), I can preview the image. The files open just fine in photoshop so I'm not understanding why I can't preview the thumbnails in bridge. I'm at a loss as to why I'm having this issue and have no clue where to start troubleshooting. Any words of wisdom would be very helpfull.

Hicurrently the files are being managed by Bridge, mostly jpeg files. All of them have a basic edit, done with Adobe Camera RAW (ACR), some even more.I want to migrate these files into Lighroom Classic, including the edit information, so that ideally the files are being shown the same as in Bridge, without loosing the edits.Same would also apply to metadata, e.g. names, places, or rating.I thought all edit data is being stored with or in the file, so that Bridge or LrC can read but does not touch the original file?Thanks for your help in advance 🙂

I'm using Windows 10 to access Bridge 2022.  The program is updated but keeps "crashing" on attempts to open images in one specific folder.  Also, I've cleared "cookies" to no avail.  Is there a solution to rectify this problem?  Thanks in advance for a reply. 

For the last few days Adobe Bridge crashes, doesnt even open at all. I unistalled & installed over & over but same issue. Anyone having the same issue or can someone help me?? Im on a Mac as well 

Suddenly Bridge has stopped showing Google Drive (virtual drive) in the Folders panel. I can see its alias under Users (in the Content panel), but it's not clickable. It doesn't work in the Favourite panel either. Everything was working fine until two days ago, though.  Systems:MacBook Pro 15-inch, 2019MacOS Catalina 10.15.7Adobe Bridge v 11.1.1.185Tried Adobe Bridge v 12 but it didn't work either Google Drive:They're all stream files, not mirror files (= all files are in the cloud, and nothing is on my Mac). Mac:Security & Privacy > Full Disc Access > Adobe Bridge "ticked"Security & Privacy > Files and Folders > Adobe Bridge "Full Disc Access" Bridge (Folders panel on the left): It used to show Google Drive on top of everything, just like an external HD or a business server. I might have updated it to 11.1.1.185 two days ago when I updated other apps, i.e. Illustrator, Photoshop, etc., without thinking, but I'm not 100% sure.&nbsp

Hi,I am using Bridge to add keywords to a large collection of photos and videos, and I need the keywords to show up as tags on Windows File Explorer.This worked fine for all the jpgs. The keywords are automatically being carried over as tags on explorer.However, for my mp4 files, the tag section is empty when I check from explorer. Inside Bridge I can still see the keywords checked, they are just not being transferred as tags on explorer.I have tried going into file-info on Bridge, copied all the keywords, then on explorer I went to the file's properties, and pasted them in the tags area. It works.But this way I have to work with one file at a time, and each file takes 15-20 seconds (in my case).Is there a way to easily make Windows File Explorer read Bridge's keywords as tags for mp4 files? If it works automatically for jpgs, what am I missing here?

Bridge not showing all PDF previews, someone please help?below is the screen for your easy reference: 

Sorry for this really basic question but I cant seem to find an answer (and I promise I have looked).Ive got a script for bridge from ps-scripts.com that takes the file name and inputs it into the headline metadata, or any other stated part of the metadata (so I can use live captions in Indesign without seeing the file extension).However, I have not got a clue how to run this script from bridge. Everything I have seen says its a bridge script not a photoshop script, or are they run the same way?For reference to the script http://www.ps-scripts.com/bb/viewtopic.php?f=18&t=2406&sid=abb69282c947bc40ec10%2081d5c7b9a6fc#p10283.Cheers.Bridge CS5 (4.1.0.54). Windows 7.

Hi guys I am constantly getting this message when trying to download photos from my camera. This has only started recently. It's seriously annoying! I am on a mac.Does anyone know how I can fix it?Thanks in advanceJimmy

I always udate to latest version. Using Windows 10. Bridge closes shortly after opening.