Bug Reports
Recently active
Has anyone else had a problem where Audition will only open the first few seconds of a file? I have an audio file that's around an hour long, and it will open and play fully in other programs so I'm fairly certain it isn't a problem with the file, however Adobe Audition will only open the first 9 seconds. Is there a simple fix that someone has come across or is this something that only I'm running into. Any answer is appreciated. I've tried it in Audition 24 and 25 using Windows.
Hi, Not a biggy, but for some reason, thre multitrack session templates keep disappearing from Audition. I've gotten into the habit of using these and not having them is disrupting my workflow. If I complete unistall Audition (including plists) and reinstall, they reapear, but then diapper again a number of weeks after. If I reser the app (reopen with shift held down), the templates do not return. Any ideas?
I have Audition 2023. It jerks when I try to play any file. It records a few seconds and stops. I noticed that when I open ProTools then Audition, all these problems stop and Audition functions just fine. What could the issue be? I use M-Audio air 192/14 interface. I have reinstalled the drivers a number of times. Has anyone else faced this issue and what's the remedy?
I have had this issue for over a year now with Audition and I don't know what to do anymore. I've done complete reinstalls of Windows and Adobe and it persists. I've reset settings, turned off hardware acceleration, etc. No matter what, I keep having issues where most of the time effect windows will not load properly. Presets and preset stacks work, but I can't edit them. I'm at my wits end on searching and trying to figure it out...has anyone had this issue or know the fix?
I've been using CC without too many issues for a couple years. Then today, my recording sounded like this! (Attached.) It had been working fine, until it didn't. I changed no settings or anything. I don't have the technichal vocabulary to desribe what is "happening" to this sound file, so any suggestions would be appreciated!Note: I've rebooted my PC three times, tried it with no other browsers or programs running, and that didn't help. Thanks in advance!
Hi. I used Auditon a lot recently but today it suddendly stopped starting up. The program just freezes upon start up with this screen. I tried to roll back to the previous version - same problem. My realtek audio chipset is onboard sitting on a ROG STRIX X570-E GAMINGAppreciate helpful comments!
Hi friends, and hopefully developers... for me, saving an audio file as an M4A always introduces a tiny split-second of silence at the end. (You have to close the file and re-open to discover the silence.) While this probably isn't a problem for 99% of users, that silence causes issues on my end because I create M4As that are looping audios. The silence is no bueno for this task. I've had to go to a different platform for this final task of my work. I'd much rather stay in Audition. A fix would be appreciated. Thank you!Audio File attached: Pink noise at -21 LUFS saved from WAV to M4A, closed, opened, copy-and-pasted looping (for demonstration).
I’m having a little bit of trouble with Adobe Audition, for some reason its not finding all the session files. Here’s some context. I’m working on a film where all the audio has been done inside premiere. I imported the premiere project file into audition to do a 5.1 mix and everything is good. I can access the project file from a different computer over the network and it finds the files every time. However when I copy the entire project over to a SSD to work on it on the go there are select video and audio files audition cannot find and its making me link hundreds of files individually in a very inconvenient way compared to how premiere does it. The premiere project file that is linked to the session can find all the files fine, the file structure hasn’t changed to when I copied it over to the SSD and I just don’t know why this is happening. The picture is what I get when I open the file up on the ssd.
Running Windows 11, Audition build 23.6.1.3I can capture a Noise Print just fine. But I can't see the Noise Reduction (process) window. It's nowhere to be found. I've restarted, rebooted, and reinstalled, but it simply doesn't work.Do I need to wipe all of my user preferences and start completely from scratch? I hope not, cuz I have a lot of customization I've done to the workspace, addons, etc.Any help is much appreciated.
I have been continusely getting this same error message and now I have lost over 20 mins of recorded audio. The file visually appears to be there but the audio has gone! I did not save over the audio I simply closed the program and re started when I open it up and try and play the file there is nothing. An entire days work is now gone.
Hi team, I really don't know what happened this afternoon, but I spent the afternoon editing, exporting and going about my business. When I was sharing the files I'd edited, I was getting messages back from people to say the files wouldn't play. Audition didn't crash, or show any warnings. The .sesx file and the mp3 files that I exported are all absoutely unreadable. I've tried repairing them with all the usual services and they seem to be absolute toast. Trying to open them on Audition returns a 'dat?' error. If anyone has experienced similar, or even better could retrieve the data in the files, I'd be hugely grateful. I've attached the main edit below, in case anyone fancies having a go at fixing! (I can't upload below because it isn't even recognising it as an mp3!) https://we.tl/t-uMEtzM8IAK Thanks
Wechselt man den Eingang von Stereo auf Mono erlischt bei aktivierter Rekordspur die Pegelanzeigen. Man muss Rekord deaktivieren und erneut aktivieren um den Pegel sehen zu können. Dasselbe Verhalten ist nach einem Programmneustart zu beobachten. Ich hatte ursprünglich das Problem der Mikrofonfreigabe vom Mac welches durch den Support gelöst wurde. Da wurde auch kein Pegel angezeigt. In dem Fall war aber tatsächlich kein Pegel vorhanden, da der Mac das Mikrosignal nicht an Adobe weitergereicht hat (vom Scarlett Interface) Jetzt ist es nur noch eine Darstellungssache. Wenn man es weiß, kein Problem. Aber das lässt sich bestimmt beheben.
When I record a podcast on Audition for Mac OS 15.1.1, after about twenty minutes, a clicking noise starts to appear on the audio track. Has anyone else experienced this problem? I’m using professional microphones and a mixing desk. I didn’t have this issue before. I haven’t changed anything in my setup except possibly the update to my Mac.THANKS a lot. J.
Bonjour, Je viens ici pour demander de l'aide en espérant enfin trouver une solution à mon problème. Voilà, depuis la mise à jour de Audition 2020 et dans toutes les versions ultérieures, je ne peux plus utiliser les effets internes. Actuellement j'utilise la version 2025 d'Audition. Quelques soit l'effet que j'essaie de charger un effet, j'ai systématiquement le message suivant qui s'affiche : La préconfiguration "nom de l'effet" n'a pas été chargée correctement. Dans la capture ci-joint vous pouvez voir que j'ai essayé d'appliquer l'effet "Enhance lows". En revanche, quand j'utilsie la version 2019 de Audition, tout va bien, ça fonctionne. Je précise que je n'ai aucun souci avec les effets externes comme ceux de ma carte Universal Audio sur les versions ultérieures à 2019.Sur le net, je ne trouve personne qui en parle, donc aucune piste pour trouver d'où vient le problème. J'utilise un mac rétina 4K de 2017 sous Ventura 13.7.1 Quelqu'un aurait-il une idée ?
Audition 25.0.0.47 on an M3 Max MBPFor ducking voices on a three way interview.I created 3 stereo tracks and 3 mono busses. Track 1, Track 2 and Track 3, Bus 1, Bus2, Bus 3.On each track there is an instance of Izotope Neutron 4 Compressor in FX slot 1.Bus 1 Send 1 is routed to Side-Chain>Neutron 4 Compressor (Track 1 - Slot 1)Bus 2 Send 1 is routed to Side-Chain>Neutron 4 Compressor (Track 2 - Slot 1)Bus 3 Send 1 is routed to Side-Chain>Neutron 4 Compressor (Track 3 - Slot 1) Track 1 Send 1 is routed to Bus 2Track 1 Send 2 is routed to Bus 3 Now when I try to Route Track 2 Send 1 to Bus 1, the only option available is Bus 3, I can't send to Bus 1, and if I send to Bus 3 from Track 2 I can't send to any bus from Track 3. So Bus 3 is now getting audio from Tracks 1 & 2 and sending that audio to the side-chain input of the compressor on Track 3, as expected, but the other busses are only getting one input each. It seems like the sends are disabled because Audi
Audition 24.6.3.2, 2023 MBP M2 Pro, Sonoma 14.4.1, Samsung 4TB SSDI've imported a WAV file into a new project, placed it into a multitrack session to trim the head and tail (church sermon), and exported a 192Kbps MP3, just under 23 minutes long. The MP3 is needed elsewhere as-is, but I do import the cleaned-up file back into my project and place it in the multitrack. The file shows up grayed out, doing some sort of conform process, with a time estimate that grows from just over an hour to nearly nine hours. I let the process run and, after about 45 seconds, the clip shows up normal and we're ready to work with it. The first couple of times this happened, I force-quit Audition and exported a WAV file instead, but I'm trying to keep my year-long project folder to a reasonable size, hence the MP3. Today I let the process finish and all seems well, except for this apparent bug. Thoughts?
I have tracks that are MP3 files - mono, 192 - they came from mono 44100 32 bit. I can look at them and play them as single tracks, but if I drag them to a multi-track session the file turns into static.
Hello, I created an audiobook with 16 markers. Then I exported all files to separate mp3 files. 2 of the files where destroyed: they had at the end a strange loop of words or even a part of a text from a completely different chapter (marker). It seems that it appears only at the end of some files.Because I didn't recognize, I uploaded the files to audible - GREAT! Can somebody explain this?Did someone have the same problem?I am using Adobe Audition latest version 11/2024 Regards,Mario
Rack effects completely broken in new Audition... all black.How is this okay?
Hello, I have a very powerful computer with a powerful processor. I used to work with the old Adobe until now and I didn't encounter this problem and I would appreciate help. Every time I start playing the track with the spacebar, it takes almost half a second for the track to start. It's very annoying and inconvenient to work with. In the old auditions, it always goes online when I press the key. It's important to note that I work with a wireless keyboard (but I also worked in previous versions). Is there a setting or something that can be done to improve the editing process and so that the key works without delay to start the track?
I edit podcasts for a living and have an issue with Audition that's been bugging me for literally years. As shown in the video, while editing out hesitations and stutters, sometimes Audition won't let me delete a selected clip during playback in the multitrack editor. I have to stop playback, delete the clip, and resume playback. It happens maybe one in every 5-10 edits, which is enough to be hugely annoying, to break my flow when editing, and add up to a lot of wasted time. I'm on a top-end Macbook Pro and have had this issue with every version of Audition I've ever used. Any suggestions? This has been driving me nuts for YEARS.
I'm using the latest version of Audition on a Razer Blade 16' laptop with Windows 11 and this issue happens everytime and I get an error message. This also happens for shortcuts to open a file such as clicking on a blank area of the 'files' dock or by opening up computer location manually to save a file. Just to be clear though you can still save files but you have to copy and paste in the address without going into computer location within Audition. I have 32 GB memory, more than enough storage and have checked for any dodgy files in my C drive that may be creating this crash. I have used CCleaner to uninistall and then reinstall fresh but this hasn't worked. Attempting to install Audition on a separate hard drive hasn't worked either. I have looked for fixes online and tried everything and nothing works. Would appreciate any help as this is becoming a nightmare. I have attached some relevent log info and system info. P
While working in a 5.1 multitrack session, if one chooses the "edit audio to video" workspace, the track panners have the expected "LFE only" option. However, switch to "default" (which includes a video window and is still a nice workspace for a film mix) and the "LFE only" option is nowhere to be found.
An Audition session, which is a duplicate of a template that we use for a daily podcast, has performed much worse than normal. It contains the same music files and track effects as it normally does, with about 1gb of additional dialogue tracks. When opened, the application runs incredibly slowly and jumpy. We're unsure as to how to diagnose or troubleshoot this. Any guidance or suggestions would be appreciated. Thanks, Noah
Recently when I have exported from Audition I have found that my audio has the first half duplicated, this is hard to describe but it copies part of the audio then duplicates it so its still the correct length of the original but halfway through it will restart. My process is dragging the video file into audition, applying match loudness, then exporting and for some reason the issue appears during this.
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.