Bug Reports

Hej Hannah,thank you guy for your support & the solution today. I think it solved the issue with the floating Screen somehow, but... something new is happening 😕😕 I think it depends if I work “with“ or “without“ the graphic-card-support and/or the Application-Frame On/Off (just on MAC).I am using PS on a MacBookPro here with a Nvidacard on 2screens. I always work in PS on the bigger 2nd screen which is a Wacom-Cintiq:1. I open a PSD-file here (a test-file orange/yellow)2. it opens in the upper-left corner – ok so far!3. i changed the screen-mode (F), and...4. the the hole canvas appears in a small rectangle in the upper-left corner and the other 3/4 of the canvas is just black and not useable?!! (see screenshot)...thats absolutely useless here. When i switch OFF the graphic-card-support is seams to work fine in the frameless PS. Or i have to switch the PS-Application-Frame ON to use the graphic-card-support again. But use “graphic“ and “frameless“ at the same time i

When recording a canvas resize action, it will no longer save the set percentage value. It instead now converts to inches, which make the action unusable on different size images..

Just downloaded and initially saw tool tips when I hovered but now no more.   I checked Preferences and it says to show tool tips and Reboot didn't fix.  What happened? 

Can't reopen Photoshop pdf files since updating to PS CC 2018. I can reopen old pdf files but when I save them, somehow photoshop can't reopen them 'because of a program error'. Can somebody help?I'm running on OSX High Sierra

I changed my scratch disk from C: which has 32GB free to my G: external drive which has 700GB free, and I unchecked my C: drive as my scratch disk. Only G: is selected as a scratch disk. However, Photoshop is still using my C: drive as my scratch disk even though C: is unchecked and G: is checked.

Hi All, I'm using a MacBook Pro OS 10.12 6 with Photoshop cc 2018. When I'm using Layers in Standard Screen Mode the mouse cursor glitches/flickers between arrow and hand and struggles VERY SLOWLY across the pallet. When in the Full Screen Modes it doesn't seem to happen. I need to have several images open in separate windows at the same time to be able to take elements of some images into the others - hence Standard Screen Mode. Very frustrating esp when editing multiple images together with many layers! Any ideas? Many thanks, David

Hi, i am using a Surface Book with Photoshop for painting. I'm sure everybody knows the combination of holding down the ALT Key while holding the right mouse button then moving the mosue to resize or soften the brush. In the past it was possible to do this also with the pen of the surface book. So you had to press the ALT key, hold the "right mouse button" on the pen while draging the pen to the left or right. But since some time it has stopped working and just the color sampler appears when doing so.Has anybody a solution for my problem? i tried allready resetting photoshop, updating everything on windows and some other stuff.Thank you Dominik

Once a file has been saved without a merged compatibility layer (via the file-save option Maximize PSD And PSB File Compatibility = Never), File > Save will never re-save the file with a compatibility layer, regardless of the setting of Maximize Compatibility. The only way to add the compatibility layer is to ensure Maximize Compatibility = Always and then do File > Save As to save a copy.One noticeable impact of this is that people trying to get OS X Quick Look to display thumbnails and previews by changing Maximize Compatibility could get confused and believe that the option is having no effect.To reproduce the bug: 1. Start Photoshop CC 2014 on OS X 10.9.5.2. In Photoshop > Preferences > File Handling, set Maximize PSD And PSB File Compatibility to Never.3. Restart Photoshop.4. Create a new RGB 8-bit document with two layers and visible edits on each layer (e.g. with the pencil tool).5. Save the document as "test.psd".6. In the Finder, view the folder containing "test.ps

This may be related to the healing brush lag, but I've noticed myself accommodating a lag in brush resizing that's taking almost twice as long as 2017 and is very jittery instead of smooth.  Test was done on 3,000px x 3,000 canvas in both programs starting with a 1px brush and rapidly resizing to edge of canvas. Both installs have the same performance settings201825 frames between start of drag and visual representation of final brush size1 transition frame15 frames before any size change in brush 201715 Frames between start of drag and visual representation of final brush size4+ transition frames5 Frames before size change in brushThis is really frustrating when frequently changing brush sizes.MacBook Pro Late 2016 spec'd out Updated OS and PS(Animations slowed down)

Hi! When using the color picker accross an image (to see how the value, saturation and hue transitions), i have to clic several times in order to see the changes. As a matter of fact, you only see the Hue change on the hue slider, just not the saturation and value one which stays static as long as you don't release the mouse clic. In painter, the change are realtime, without having to spam the clic. I find this option extremely valuable to see how gradients are functioning. How can i fix this? thanks in advance

Photoshop cc 2014 dont show pattern size at floating dock Windows 8, Photoshop cc 2014 In Photoshop сs6 everything works well

I have files created in PS CC 2014... when I go to the pattern overlay dialog box and mouse over the background patters no dimensions appear. No tooltip appears at all.

I've found another bug with navigator. When you have zoomed image and you drag it doooown dooown doown, it goes crazy and you end up on left side of image. Example here http://www.screenr.com/itKN (screenr didnt want to capture movement of hand when pressed and dragged navigator :), so ...)

There is a bug when trying to copying & pasting layers that are smaller than 5x5 pixels and placed at the canvas border in Photoshop CC 2014.2 (and older versions as well, up to at least CS6). Steps to recreate: 1. Create a new file, 64x64 pixels in size, transparent background 2. With the pencil tool selected. place a single pixel of any color at the coordinates 0,0 (top left corner) 3. Ctrl + A to select all 4. Go to Edit -> Copy Merged 5. Create a new file, 64x64 pixels in size, transparent background 6. Go to Edit -> Paste Special Expected behavior: the single pixel is situated in the top left corner at coordinates 0,0. Actual behavior: the single pixel is placed in the dead center of the file at 31,31 This procedure only works if you move the single pixel on the layer 4 pixels away from the canvas border OR if you increase the contents of the layer to over 4 pixels in any dimension. Only then will you get the expected behavior from the paste in place command.

If I have 2 files with the same name open at once (stored in different directories), Photoshop does not always use the file that was was active when the script was called. It looks like the script only looks for the first open file with that name.

Inaccuracy in the interface layer effects. Border must be perfect at 45 degrees. See screenshot below. P.S.: The devil is in the details 🙂

Opening a BMP file in PS tells me, that the file has a resolution of 1016,25 dpi. The hexadecimal code for the resolution of this BMP image in a hex editor is 40 9c 00 00 (both directions). 9c40 -> to decimal = 40000 pixel per meter -> 1016 pixel per inch. I suppose the resolution shown in Photoshop is wrong?

Hello, after installing Yosemite on my iMac 27 I faced an issue: When I use Refine Edge in Photoshop CC 2014, I try to change the view using hotkeys, all keys are working (M, V, B, K, L, R, F) except for W. When I press W error sound sounds and nothing happens. Looks like there is a conflict of this key with the Mac OS X Yosemite. Do you know this problem? Do you know how to fix this problem?

When an action is recorded in Photoshop CC or CC 2014 the mode change to duotone is always defined as a description of duotone ink and transfer points. Even when loading a duotone preset while recording. We have to go back to Photoshop CS5 to record an action defined as a link to a duotone preset. The problem is when an action with the description of Duotone transfer points is played back only the first 5 transfer points are used for each curve. All the transfer points past the fifth are set to null, including 100. Also transfer points that are equal, like Value: 50 - Response: 50, are not recorded at all. That is a problem because equal value transfer points like that are used along with other transfer points to set the slope of curves. They can't just be ignored. I have examples of the correct duotone curves and the results when playing it back from an action. You can see that only the first five transfer points are correct and the rest are set to null, including 100 which is reset t

It seems that when I do this, regardless of the text settings, all I get is a tiny blob of ink at the path node where I tried to initiate the text on the path.

Hello, I've read a previous post regarding this topic. Someone could please confirm me that there is no way to place a guide (using View > New Guide... > type in px o cm) relative to rulers' origin?If I place the origin of the rulers in the middle of a 800x600 px document and try to create a vertical guide typing in the pixels, for example 20 px, the guide is placed 20 px from the left margin of the document and not at 420 px (using absolute x/y coordinates) as I'm expecting.Is this behaviour ok? For me it makes not a great sense...Luca

When saving a file, specifically TIFs in my case, that has a "^3" in the image name, photoshop changes the name during the saving process. For example, "1253352^339.tif" turns into "1253352tif39.tif" changing the ^3 to say tif instead.

Hello, I have noticed that, when I save a liquify mesh, the arrow cursor disappears behind the save mesh dialog. Instead of seeing the OS' regular arrow cursor, I can see the liquify brush behind it. This happens randomly, but more notoriously when the cursor touches any text input fields. As you can see in this screenshot, the blue arrow I've drawn is where the cursor should be. Instead, you can see the liquify brush behind the window. This happens with CC 2014 and remains in CC2015. Tried in various mac computers running Yosemite. Only happens in the LIQUIFY save mesh dialog, not the save document dialog. Thanks

Please change the Glyphs Panel behavior to be independent of the Type Tool's settings. As-is, it's not very useful.

I'm running Photoshop CC 2015 on Mac OS X 10.9.5 and every time I run the spell check, Photoshop QUITS!!! Please fix.