Bug Reports

The scroll bars in the Lumetri panel do not work. One can move them up and down but the rest does not follow. Need to scroll with the mouse inside the panel to get things moving. B83.

Bei maskierten Ebenen treten horizintale Linien nach dem Export aus der Premiere Beta Version auf. 

I can't figure out how to get rid of these horizonatl lines. They show up in different ways, depending on how a mask is used.*I've included two screenshots––One is using a mask on the opacity of the Black Color Matt (and only effects the masked area)–the other is when using the crop effect added to the Black Color Matt.The lines seem to always apprear in some fasion when any mask is applied. This wasn't happening until I updated to the latest version of premiere beta.   

I have big problems with the Adobe DV25 (PAL SD) AVI files since version version cc2023.3 and higher.(Including cc2025)When I try to import a long DV25 file (> 1hour) it takes forever to get it imported in Premiere.Premiere freezes for minutes.When I import these files in cc2023.3 it's there in a second.Note I see this with several new installed sytems!stepstry to import a classic DV25 avi file with a longer play durationresultPremiere freezes several minutes, while using 100% diskread. The only fix I had was installing CC2023.3 but that's not anymore available in creative suite!!

Selecting a mask (from Opacity) causes the Program Monitor to go black. Screen stays black even opening another project. Have to restart Premiere. B81 windows.

Hello,Depuis la dernière MAJ j'ai un bug d'affichage. Des que j'utilise un masque sur un plan, celui ci devient entièrement recouvert de trait transparent horizontaux, comme un découpage Je suis en Beta 25.4 si quelqu'un a ça ou une solutionJe laisse un screen en PJ

I have tried reloading my 11-minute video several times, and I'm unable to compile or edit the clips. Audio is fine, but I'm doing a voiceover and have no visual cue. I'm using Windows 11 Pro Version 10.0.26100 build 26100 OS platform and Adobe Premiere Pro (Beta) V25.4.0.081. 

I dusted off the old FS100 to do a quick transfer of 8mm sound movie film. It plays perfectly in Windows Media Player, but in all Adobe products, it plays as pink noise (obviously the bitstream). Same result in both Beta and shipping versions of Premier, Audition and Media Encoder. I ran it thru Handbrake and it decoded correctly. Ideas?

I have encountered a bug related to the Enhance Speech feature in Premiere Pro Beta v24.1.0.53.Enhance Speech is a fantastic feature and has significantly improved my editing efficiency. However, after updating to Premiere Pro Beta v24.1.0.53 today, I encountered a bug where the audio is being played back twice. Specifically, the sections of audio that have been cut in text-based editing are being played back in duplicate. This issue was not present in previous versions.I suspect that the issue lies with version v24.1.0.53. Alternatively, is there a way to re-render Enhance Speech? The overlapping audio is making editing difficult.Thank you for your assistance.

very often, when applying a cut with the blade tool, the playhead skips immediately to a random point of the timeline

Hi, I'm having an issue where my playhead jumps to a strange part of my sequence.- In Sequence A, I move the playhead to some point on the timeline- Go to another tab for Sequence B, or the source window, or the project window- Go back to Sequence A, and the playhead jumps to 3:22.I've had this kind of glitch or error happen a few times before, but never was able to replicate it.- I've updated software and I'm sure it's happend across different versions.- I've used different workspaces on different systems- I've restarted and re-installed- The "return playhead to start after playback" is turned OFF (and most of the time I wasn't even playing)- (none of these because of this glitch, because it wasn't that persistent, but I've done all of that for other reasons and still occasionally see this happen) Attached is a screen recording of it happening.Anyone else have this issue?Anyone know any fixes for it? Premeire 24.3.0Mac Studio M2, 64gb Ram, plenty of hard drive space, up

 All my previous LUTs have disappeared from here, and adding them again doesn't work. V25.4 (build 68)

Cannot customize video and audio header timeline. No handtool to drag the icon to its new position. B72

Both clips are stabilized, now I want to trim the clips. All I did was double-clicking on the cut to bring up the Trim window and both clips are showing banners. Cannot see what I am doing, because the subject (in this case a bee) is hiding under the banner. Edited.  

Premiere Pro returns the wrong video frame when an effect plugin asks for the effect layer’s contents of a clip where a transition has also been applied. The process used by third-party plugins to extract video frames is to call `PF_CHECKOUT_PARAM` with a 0 checkout index for the effect layer. This allows plugins to fetch frames anywhere along the clip’s range. If a different transition effect is applied to the head of the same clip, Premiere Pro will return frames belonging to the outgoing clip instead. (Watch the attached screencast for a more easily understood, visual explanation.) Steps to reproduce:- Install the most recent version of FxFactory from our website: https://fxfactory.com/download/ - Launch the FxFactory app, and install the Face Blur and Wipology products. The Face Blur plug-in uses the technique described above to fetch and analyze all frames on a given clip. The Wipology product will give yu a transition based on the AE SDK you can apply to trigg

I recently reported a memory error here: https://community.adobe.com/t5/after-effects-beta-bugs/unable-to-allocate-memory-error-is-back/idc-p/15374338#M1261...and that error then morphed into a much worse one where a specific project would cause PPro's timeline to become empty if I opened more than one sequence...so I thought I'd report that nasty bug specifically here. If I open more than one sequence, the timeline shows absolutely nothing at all in it. If I then close all sequences I have open, then open ONE (and only one) sequence, everything works ok again. This bug is repeatable. I've also tried creating a brand new project, and importing the offending project (or just a few selected sequences), and I get exactly the same error. I've also tried opening other projects (they work fine), and importing the offending project into that project - this also causes the same bug if I open any of the offending project's sequences. I could send you the offending project if you

Steps to reproduce:In a sequence with captions, open the captions panel.Make the text in the captions panel bigger by dragging the lower-right slider to the right. It gets bigger - nice.3. Click to edit some of the text. Result:Exactly when you want the text to be big (ie. when you're typing stuff in/editing it), it gets microscopic.Expected:Text should remain at a legible size - which is very important when, for example, changing Premiere's dumb quotes to smart quotes. System info    Application: Premiere Pro (Beta) v25.4.0.47    OS: Windows v10.0.19045, RAM: 127.91 GB GB, CPUs (logical): 32

I have been using Beta versions for as long as they will let me. I've found this bug in today's new download, 25.4.The Effects Control Panel seems to be not placing itself properly, visually, in the interface.I've never seen this before: As you can see, the text is out of alignment, and it's impossible to work with.Using MacBook Pro M2Max. 32g ram. Last version was fine and did not do this. Even if I stretch the panel across the screen, it doesn't re-draw itself. See how it looks in 25.3, below. Perfect. Thanks.Thom

No matter which workspace I choose, the effect controls variables float above the interface. The screen movie shows it best.

The latest build makes the  Film Impact "Pull Morion Impact" effect un usable.  back reving restored funtionality.

premire no eporta, se queda cargando el exportador, tampoco  exporta en MEdia encorder, he eliminano chache y reiniciado el equipo

Hi I am using the lastest version of the beta (25.4) and are unable to export anything dispite having already exported the same project about a week ago. I have attached what the export page looks like. I cannot export in media encoder either and have tried restarting everything.  

Hello, I've been using the Beta's on PPro for a while with no issues, but this latest update 3/15/2025 and the one right before it were painful.*On the latest update, I was simply trying to grab "still shots," so I wasn't even editing. I had 3 clips and took some stills, but the last clip would not play (it was a black screen where the video should be, with no audio). Please see the 1st screenshot of the error attached - it said "The audio for C0359.MP4 can't be read quickly enough from storage. Please check your storage and try again." I could not get it to work at all. *Directly prior to this latest update, I was editing a short video that was about 2 mins long on 3/12/2025. It took soooooo long because each ripple delete or sound change or basically anything I did, a box would pop up "rendering" with a circle that would keep spinning at 0%, I kept waiting and then cancelling, but then realized if I waited long enough it woud go from 0% to 100% at the very end of the w

Since few version ago I've been getting stack overrun errors in Premiere Pro beta. It seems to happen especially when doing something in the Lumetri panel. Premiere seems to work ok, but those errors popup all the time. Clips are Canon R5/R5C 8K Raw clips in a 4K timeline. ı'm on M1 Mac wiht 64GB of memory.

O Premiere pro Beta pedindo para renderizar ao usar o estabilizador de imagem e quando vou renderizar o preview fica muito lento fazendo perder muito tempo na edição.