Camera Raw

My remove tool stopped removing objects.  I have tried generative remove and plain remove.  Neither work.  For instance, I am editing a photo of a baseball catcher making a throw.  Off in the distance past the outfield fence is a school bus.  I am trying to remove it, but when the remove tool is used, it does nothing.  It highlights the area and looks like it is doing something, but it makes no changes.  Previously, prior to a couple of days ago, it was working fine.  What happened?

Please can someone explain the changes to the crop tool in Camera Raw?When using the gemoetry options I cannot crop to the edge of the image no matter what I do - this was no problem before. When the crop area is maximised, the crop tool no longer drags the cropped area, it only draws a new area to crop.This is incredibly frustrating. Please can someone tell me how to get the legacy crop tool back? This wasn’t included in any “What’s New” content I have seen.

In the latest veersion of ACR, the ability to mask subject/background etc has gone wrong. Particularly object masking. It has completely gone to unusable. It slects wrong things, Slects too Little and wont allow adding etc. It has completely changed in quality to the point I can no longer use it. I am stuck using only brush or gradient mask at best

When I'm using RAW images for editing, I typically load 10-20 images in Camera Raw. When I try to use AI-related features like AI masking, I receive the following error message:"The graphics processor has encountered an unrecoverable error.Due to a run-time error, GPU acceleration has been disabled for the remainder of the session."I have tried all the methods mentioned in forums for months, almost 6 months now. Currently, I cannot even edit a single photo if the preset is slightly heavy with AI tools such as subject selection or background selection.I have taken the following steps to try to resolve the issue:Updated the BIOS.Performed a clean installation of Windows.Conducted a driver cleanup.Updated drivers to the latest versions.Reinstalled Adobe apps.Tried using a previous version of Camera Raw (version 14.x).Used only Adobe default settings (without my own presets).Experimented with all combinations of graphic acceleration settings.Logged into a new admin user account.Had an Adob

As seen on the screen recording added to this post, my raw files are automatically getting more contrast and colour as they are loaded into Adobe Bridge… Anyone else have this problem? And how do I fix it? I would love the images to stay neutral until I edit them. 

The new masking selection tools in Camera Raw are great, but It would be much better if Camera Raw had a feather effect tool in the masking section. Because after masking, a thin, white line appears around the object that looks awful.

I know it wasn’t the wisest thing to do, but I didn’t have a chance to change filters or lenses.I was walking through an airport’s departure hall and took a picture of the apron through a large glass window pane. Because I still had my polarization filter on the lens, blotches appeared throughout the pictures, in addition to light reflecting from within the hall. I tried using the removal tool (reflections), but the result was very disappointing. There was hardly a difference noticeable. Was this just too much for the app?If anyone has a good idea on how to eliminate the blotches efficiently and effectively, I’m sure interested. I am on macOS 26.3.1 using Photoshop (27.4.0), Lightroom (15.2.1), and Camera Raw (18.2.2).Thanks for any help.Tom

"The Camera Raw settings could not be applied because there were no Camera Raw files selected or selected files were read-only" This keeps appearing when I try to open photos to camera raw. The weird thing is it's only for this one photo session.  Any ideas what it means? I'm able to bipass it by going to edit the photos in photoshop, but its a hassle cause I'm editing a whole wedding.  Any thoughts?

Je suis sous W11 Famille 64 bits Version: 26200.7840. Le microprocesseur est un Intel(R) Core(TM) Ultra 7 255H et ma carte graphique NVIDIA GeForce RTX 5060 Laptop GPU.Quand je lance Camera Raw à partir du filtre, le système peut me permettre de traiter 2 ou 3 photos, parfois une seule et parfois se plante dès le début.Très souvent le plantage a lieu après avoir créer un masque sujet et bouger un peu les curseurs exposition et contraste.Très souvent aussi, le plantage se produit quand j’essaie d’ajouter ou supprimer des zones de masquage.J’ai alors une fenêtre qui me dit : “ Le processeur graphique a rencontré une erreur irrécupérable. En raison d’une erreur d’exécution, l’accélération GPU a été désactivée pour le reste de la session “.Après action sur ctrl+alt+sup parfois j’ai accès au gestionnaire des tâches et je peux mettre fin à la session mais le plus souvent la seule solution est de se déconnecter.Après avoir beaucoup chercher avec Le Chat GPT France on a trouvé la solution suiv

Hi there, I was playing with DNG conversion of my NEF files to save space but I noticed this thing:  opening the original NEF file with MacOS’s preview and then launching the Inspector tool (cmd+I) I have a “Picture Style” tab that contains informations about the colour space used in the camera settings. If I convert that NEF files to DNG, the “picture Style” tab has gone … and, with it, the pieces of information that were there.  so when converting to DNG with ACR DNG converter why those informations are gone? and how to preserve them? 

I shoot RAW with a Nikon P1100.Ninety-nine percent of my photos are of birds.  I use the latest versions of Adobe Camera RAW and Photoshop to edit the photos on my Windows 11 laptop.  I do as much of the work as possible in ACR, mostly with subject masks.  I export the highest quality (12) JPGs as the final product.Until recently, I had always used either the Adaptive Color, Adobe Color, or Adobe Standard profiles as an editing base. I just discovered Camera Neutral, which is much better, I assume because it is tuned to my camera model, which ACR detects.  I spend a lot of time editing my photos and am very obsessive, as I compare slider changes in increments of one. With this in mind, if I make a custom DCP profile from a color calibration chart, would this make the editing job even easier and allow me to make better JPGs, or would it be a waste of money, since it would not improve on the built-in camera neutral profile? 

I have programs that generate full size DNG files, and I would like to use the stand alone version of Adobe DNG Converter to compress those files and then overwrite the original DNG to save on additional steps.  I believe that is an option within Lightroom but I don’t see that capability within the stand alone app.I understand the risks associated with overwriting originals, but this a unique need for my workflow.DNG Converter 18.2.0.2482 on Windows 11.Many thanks.

Windows 11 laptop – latest Photoshop and Camera Raw versions (rolling back three versions did not resolve the issue).I open Nikon NRW files produced by a Nikon P1100. The problem began roughly a week ago. I have been using the same profiles for years without encountering this issue.The behavior occurs with some, but not all, RAW files. When I select Adobe Color, Adobe Standard, or Adobe Vivid and apply Auto, parts of the subject develop blue artifacts. In the attached example, the artifact appears on part of a bird. In other cases, the entire bird may turn blue. Sometimes the artifacts appear along small tree branches or outlines of foliage.The artifacts are always blue.Notably, this issue does not occur when using the Adaptive Color profile.Troubleshooting performed: In Photoshop → Edit → Preferences → Performance, I disabled “Use Graphics Processor.” This did not resolve the issue. I toggled between the Photos and Web UI design workspace settings. I rolled back several versions o

I have programs that generate full size DNG files, and I would like to use the stand alone version of Adobe DNG Converter to compress those files and then overwrite the original DNG to save on additional steps.  I believe that is an option within Lightroom and ACR but I don’t see that capability within the stand alone app. I understand the risks associated with overwriting originals, but this a unique need for my workflow. DNG Converter 18.2.0.2482 on Windows 11.Many thanks.

OM-5 OM 시스템 카메라에 40-150mm F4 PRO 렌즈를 장착하고 픽셀 시프트 기능을 사용하여 고해상도 이미지를 처리할 때, 이미지 오른쪽 가장자리를 따라 푸른색 직선이 나타나는 현상을 발견했습니다. Lightroom에서 AI 노이즈 감소를 적용하면 이러한 현상이 발생합니다.이 현상은 40-150mm F4 PRO 렌즈에서만 발생하며, 다른 렌즈에서는 이러한 현상이 나타나지 않습니다.해당 현상은 AI 노이즈 감소 강도가 1%이든 100%이든 관계없이 나타납니다.일반 RAW 이미지에서는 이러한 현상이 나타나지 않습니다.AI 노이즈 감소 기능을 비활성화하거나 표준 노이즈 감소 슬라이더를 사용하면 문제가 해결됩니다.AI 노이즈 감소 기능을 적용할 때 이 렌즈의 픽셀 시프트 이미지에서 발생하는 특정 처리 오류인 것 같습니다. 샘플 파일이나 추가 정보가 필요하시면 알려주세요.관심 가져주셔서 감사합니다.진심으로 감사드립니다.

He realizado un cursillo de retoque fotográfico con Adobe Bridge y Camera Raw. Actualmente tengo una máquina Nikon y utilizo Capture NXD para el retoque de fotos RAW; este producto es gratuito para los compradores de Nikon. Pero veo que Camera Raw tiene mejores funcionalidades.He estado mirando en la web qué producto y licencia debo adquirir para operar con Camera Raw, y la verdad es que la información es muy extensa y confusa. Me gustaría adquirir un producto con licencia permanente, no con una suscripción anual. El uso es ocasional y personal, nada profesional.Me gustaría que me guiaran para una compra correcta. Muchas gracias

Is there a command line script I can execute in Windows (command line) that can have Camera RAW (Photoshop) load a RAW file with edit (XMP file) and then export it to a JPEG file?I know you can batch process images but this usually requires it to be done from within Bridge or even Photoshop, but I’m looking for a way i can do it from the Windows command-line as I’m trying to find a way to do this so I can use it as part of a program (that would then use the exported JPEG file).