Camera Raw

This my request is for your Scientists Team of Adobe Camera RAW (……..Eric Chan?)  Gentlemen, I would like to ask you about the possibility to implement in Camera RAW an instrument for border sharpness recovery, either on a single type of lens or independently from the used lens, based on AI recovery of the Astigmatism of the lens.Border sharpness is usually occurring due to astigmatism present in the lens and my question is if would be possible to implement an AI instrument in Camera RAW which: analyses the image and detects, if any, the presence of astigmatism at the borders of the image. Effectively corrects and recover the sharpness at the borders of the image using two different sharpening patterns, one of them based on the sagittal pattern of the astigmatism, the other based on the meridional pattern of the astigmatism. I think this will be greatly appreciated by landscape photographers, but not only by them, particularly if they use old lenses.I thank you

Camera raw stop functioning after receive update. After open it photoshop enter in deep sleep mode (freezy) 

Recently, ACR has added some firefly tools. Generative filling and others.If you switch to the remove section, the generative fill tool is always first. It is selected there by default.In life, I use generative filling in Photoshop, since it is more advanced there, and for all sorts of small and frequent actions I use the heal tool, but I need to switch to heal every time when opening the detail removal section - this is wildly inconvenient!!!How can I make the heal tool there by default?

From the topic https://community.adobe.com/t5/photoshop-ecosystem-discussions/creating-your-own-creative-profiles-in-adobe-camera-raw/m-p/11439192 I realized that creating profiles is no longer available in ACR . You can only create presets.It was convenient for me to see the one I needed among the many presets. The scene had an idea of ​​what this profile was about, so as not to click on each one.That's it?

Good day to all.Does anyone know how to overcome such a problem as slight delays in program response when working with any tools?For example, I move the exposure slider, or a point on the curve, or some slider in the camera calibration section, and sometimes (not always) the program starts... I would call it women's periods)) some lags begin.I once encountered something similar, about 10 years ago or earlier, if I inserted a CD into the computer drive. The entire system froze for a moment. But now the pause is shorter and concerns only the work of ACR. Davinci Resolve, Darktabel, Rawtherapee - there are no such problems, just as nothing like this is observed in the system itself.Maybe the problem is due to some parallel calculations in Adobe Bridge, where I run acr from?I was already thinking that the program needed to do its own thing)) and gave the program three hours. Closed acr, leaving only adobe bridge open. It did not help.I cleared the entire cache of Adobe Bridge files. I rebo

Hi All, Does anyone knows how to create your own profile in Camera Raw?? I know in the 10.3 version it was easy, but I can't seem to find how to do it in the new version.  Thank you!

更新到 Camera raw 版本 16 后，我在使用 Camera raw 时经常遇到卡住和滑块不敏感的问题，尤其是在使用完全卡住的预设功能时。这是我的电脑配置。我在电脑上玩游戏时没有遇到任何延迟，这只会发生在 Photoshop 中。我也尝试重新安装系统，但问题仍然存在，并且已经困扰了我很长时间。 

Does camera raw have some option to resize raw files while editing so it can faster move to next image. Someting like proxy videos in Premiere, but you know, for pictures in Camera Raw. And when exporting, of course, export from original file so it doesn't lose quality?

I am retying to create a new Raw Defaults preset for my camera. I have successfully created these in the past. But when I create them today I cannot find them. No error message when creating. Just nothing.Then I notice a menu choice "Show Partially Compatible Presets" and when I click this I see the many presets (with different test names) that I was creating but they are grayed out. What is a partially compatible preset? How do I create a "usable" Raw Defaults preset? What am I doing wrong? Thanks,Peter

All of a sudden I can't open Camera Raw in PhotoShop. I get this message. It doesn't matter what kind of photo. I have never seen this before.  

Adobe Camera Raw 16.3Ao abrir um arquivo RAW e fazer uma máscara, o menu fica incompleto(conforme imagem em anexo). E se abrir a imagem e posteriormente usarmos o Ctrl+Shift+A , a mascara funciona normalmente

ISSUE:Camera Raw — When I go into Masking,everything freezes. The only way out  is to Force Quit. SYSTEM:Ps version 25.7.0M2 Max; Mac14,6Ventura 13.2.164 GB RAM; LPDDR5

bonjour  a toussur la derniére mise a jour photoshop  les masquages rapide camera raw 16.3 ciel sujet etc etc n'apparaissent pas lorsque j'ouvre mon image et si j'ouvre à nouveau l'image dans camera raw ils ne sont pas  mémorisé non plus

Hi there!My Camera Raw Filter doesn´t work in PS. I don´t see any GPU in Photoshop "Preferences" - "Camera RAW".There is just a notification - "Camera Raw graphics accelerator is not supported by your system."  But there is my NVIDIA GeForce RTX 2070 in Photoshop "Preferences" - "Performance" visible.  This method doesn't work because Photoshop crashes every time, I launch Camera RAW Filter. Go to the following locationsC:\Users\<Username>\AppData\Roaming\Adobe\CameraRawRename the GPU folder as 'GPU.old' (add .old at the end)Restart Photoshop and Camera Raw again.  MY SYSTEM: Operating System: Windows 11 64-bitAdobe Photoshop Version: 25.5.0 2024Camera Raw (Version 16.2.0.1763) GPU 01: NVIDIA GeForce RTX 2070, 8GBGPU 02:  Intel(R) UHD Graphics 630RAM 64Gb  I also added some screenshots here.Could you advise any decision of this problem? Thank you!Best wishes

After ACR 16 & Br 14, I am getting almost always out-of-memory errors, and then GPU gets disabled. I need to restart Br. System and GPU RAM are 24GB and 8GB.  A very unreasonable situation... Any ideas? 

BonjourDepuis quelques jours lorsque j'essaie d'ouvrir mes RAWs depuis l'explorateur Windows ou depuis photoshop j'ai des problèmes.Caméra Raw ne s'ouvre pas et Photoshop se bloque.De même si j'essaie d'utilisé le filtre camera raw depuis photo shopC'est des extention traditionnelles CR2 et CR3.Malgrès pas mal de recherche je n'ai paqs trouvé la solution.J'ai réinstaller la dernière version de photoshop et de caméra Raw mais c'est toujours pareil.Merci pour votre aideJe suis sou Win11 et avec la dernière version photo shop et caméra raw

Select a photo from Bridge and open it in Camera RAW.Apply a mask to the photo.Selecting a point color in a mask becomes unstable and freezes.   Windows Update, graphics driver is the latest version. (Geforce 1060)   This phenomenon does not occur on Windows 11.   Windows10 , Camera RAW 16.3 , Bridge14.1 , Photoshop 25.9　（Japanese Ver.）

Halloso I'm writing here again "grrr" that something doesn't work after the update. With the Adobe Camera Raw plugin I switched between the current and original settings using the shortcut "\" - suddenly it doesn't work. and I didn't change anything!I also don't understand why the " § "  and " ¨ "key closes the entire camera raw window without saving anything or asking if I really want to cancel the edits! I would really cancel this feature! if he accidentally hits this key, when he has almost everything colored and edited, he can go straight to commit suic*de, because he will throw away maybe 5 hours of editing! In conclusion, I would like to add that adobe is currently very close to giving up on you and moving on to a competitor! I really don't want to pay you for this! adobe bridge is slow in recent updates! adobe premiere also slows down after the latest updates, plus pointless modifications to the functionality and thus the ACR plugin!these are my three mo

Hi,Using LRT Timelapse, which relies on DNG converter, I have a problem with one of my lenses. The lens profile of the  Lumix S20-60mm doesn't get applied within DNG Converter, however, it works fine in LR Classic. As a result I get quite a bit of distortion and vignetting in LRT.All other lenses seem to work wtih LRT & DNG Converter, just not that one. Any idea or is that a bug that can be fixed?Thanks,Peter

Watch attached video in ACR and Photoshop curve points disappear if you drag curve point with mouse outside window and release mouse button while its outside.      Photoshop 25.4GPU Acceleration enabled in full

更新版 camera ram v16.3 限制裁切 不能使用

Every so often, someone reports that they have a major problem with some important set of images because a beta or technical preview feature messed things up. This is a gentle reminder to all that "important image" and "beta build" do not go together. If you're going to work with a technical preview or beta feature, always do that with copies or throwaway test images, never with actual working files. No matter how exciting or useful or game-changing an early-access feature looks, unexpected things do happen.   Always have a backup, and a backup plan. Never trust production work to beta software.

When I edit a photo in Photoshop for the first time, Camera Raw works properly. When I want to open it again, I get strange colors in the picture and Camera Raw won't open. Does anyone have an idea for a solution ? PS 25.7.0 CR 16.2.1.1767 win10

After updating ACR to 16.3, open the program, select the brush in the mask in ACR. We create a mask and acr hangs safely. The second window (alt+tab) is the Adobe report, but you can’t switch to it, just like anywhere else. Even in the task manager via ctrl+alt+del. Only logout and loss of all work I did for about 6 hours.  Than I delete the acr user profile (in appdata) -work again - the same story. Reinstall acr, along with all applications from cc. Be clean all the Adobe settings in the appdata. Launch it, we work - we also freeze when working with masks.I'd download previous one - 16,2, from https://adobe-camera-raw.ru.uptodown.com/windows/download/124946969 and my problem was solved. All program freezes have disappeared.My OS/hw: win10 21h2 ltsc/i7-12700K/RTX 4070 EAGLE OC 12G/Kingston FURY Beast Black [KF556C36BBEK2-32] 32 ГБ/about 400 GB freespace on ssd one.

Hi guys, Recently shot with FUJI GFX 100S with the usual option of lossless compression in 14bit (worked before withe the GFX 100 and the .RAF files cannot be read/ previewed in bridge let alone opened in photoshop through Camera Raw (yes everything is up to date) Any thoughts or successfull work arounds would be greatly appreciated!