Camera Raw

I used to be able to increase sharpness under the Detail tab by using alt+mask, alt+sharpening, alt+radius. Where is this feature in the new camera raw?

When using the sliders for contrast, highlights, etc. the image display is jerky, i.e. there is no linear conversion of the slider movement. A downgrade to 14.5 shows that the error does not occur there.My equipmentI7-8600, 16GB, all hard disks SSD, Windows 10 64Bit

so as the tile says. currently running pse 24. however all jpg files keep opeing in camera raw. ive tried to disable in the check boxes, disable using graphics processor  and still it keeps opening. really anoying bug as camera raw is so slow to boot any how.please fix the bug! trying to work here Adobe 🙂

Ok I have two issues when using camera raw. 1. Images in camera raw will not open in photoshop when I click open. I have to go back to bridge and right click open in photoshop, once I do this the image will open again in camera raw and then when I click open it will open in photoshop. This is time consuming and very frustrating as I work with high volumes of images and I simply cannot be going through this process several times doing the workflow. 2. Images that are selected in camera raw to save as jpegs are not all saving. I've had 3 jobs come back to me regarding missing images in the past 4 days. The first images are not saving. In one job it was 4 images, 10 images in the next and 6 in the last one. I know that the Ideal thing to do is refernce how many files are there in the first place and how many have saved but when dealing with 1000 images (done in batches) I do not have time to be going back and forth to make sure a simole thing like saving an image is done correct

The actual version of Camera RAW (15.1.1) doesn't respect color- or display profiles when hardware acceleration is turned on. On a wide gamut monitor the images appear oversaturated. The problem does not exist in the actual version of LRC with hardware acceleration enabled.I am working on Windows 10 with a Titan RTX graphics card with the latest Studio Drivers from NVidia. 

ISSUE:  Lightroom V 5.3 and LRC V 11.3.1. with CR 14.2 (all for Mac OSX) and LR for IOS V 7.3.2 all have a bug that menas that lens corrections do not work for  the lenses listed as Supported if the camer used is the Leica M11.   Step 1: open any DNG file shot using the Leica M11.  Step 2: go to Lens Corrections Step 3: enable lens corrections (process differs depending on version and platform but result is the same across all   Expected result: Lens corrections for that particular lens should be applied if that lens is listed as Supported   Actual Result: Lens corrections are not applied.   Additional information 1: This has been confirmed by many experienced users.   Additional information 2: If I use the DNG Cleaner app to alter the DNG file so that the EXOF shows the camera as Leica M10-R or Leica M9 and then follow the exact process above, the lens corrections are applied.   Additional Information 3: two examples of lenses that are list

La Nitidezza in Camera Raw rimane, assolutamente, insufficiente, rispetto a software come Capture one.Se aumento la nitidezza sugli occhi in un ritratto, si forma un disturbo, una grana, che deteriora l'immagine. Non si può migliorare?

Hello Adobe-Support, I have .NEF files. If I open them in Photoshop, the picture is displayed in strange colors, like in the first screenshot. If I open the same file with GIMP (darktable), it is displayed correctly (second screenshot). I tried it on different PC´s and it is still wrong in Photoshop. I use the newest version of Photoshop and Camera Raw. I also tried different versions. Camera is: NIKON D5600.How to fix this problem?  

Software:OS Ventura.PS versione 24.1.1 (profilo Adobe1998)ACR 15.1 (profilo Adobe1998) Hardware:Mac mini M1 16Gb RamMonitor Benq Sw270c con profili ICC Adobe V2 Problema:ACR visualizza l'immagine sottoesposta con GPU attivata, PS la visualizza correttamente.Misurando il punto i valori RGB sono identici, l'immagine non viene modificata ma la visualizzazione è differente.Disabilitando la GPU l'immagine visualizzata è corretta. Con ACR 14.5 non ci sono problemi. Azioni intraprese:Inizializzazione del disco, installazione pulita di Ventura, e installazione di Ps + ACR.(Con OS Monterey avevo lo stesso problema, con ICC generici o creati non cambia.) Chiedo cortesi suggerimenti. Rudy.

Since the most recent updates for PS my camera raw functions have become unusable. Not sure why suddenly when I open it, edit a photo and click "OK" the app locks up and must be closed via task manager. The layer goes blank on the right side as well. Ive tried previous versions of both CR and PS with no solution. 😞

New computer with windows 12. (11)? the only way i can get into camera raw is to go to bridge and open in raw. I just updated raw and there is no open command in the block. If I click on a raw photo it will not open or offer raw. I have taken raw out 3 times and reinstalled.  

Is there a way to batch export all saved snapshots from an images? Instead of doing it one by one.This could be so usefull... 

Its nice that we have new wersion of Photoshop but My photoshop CAMERA RAW stop WORKING due supid AIWhen opening new  NEFF file or trying to USE CAMERA RAW filter for 1 ms rises message AI filters need update (i captured it via screen capture  software) then message left and  photoshop probably wainting wor dhis dialog but dialog is hidden and i am angry....

Hello. A few people have had this problem in the past, with one old solution being a LR plugin that no longer seems to exist. So I'm stuckMy Canon camera's aspect ratio is 3:2 and all raw files are saved as such. I had cropping on camera at 4:3. Even so, the camera still saves the raw file as 3:2. I have "add cropping information" OFF on my camera so they should appear as 3:2 on Adobe apps. However the raw files are opening as 4:3 in ACR/Photoshp/Bridge. I've opened one such .CR2 file in RawTherapee and the extra pixels are there (but I'd rather use ACR to edit). So I think, on opening the file, Adobe is reading some kind of crop prompt and I can't find anywhere to stop it from doing this. Nothing in the crop panel of ACR, nothing in metadata I can change. This should be so simple! Please help 🙂Please be aware - I don't really understand exif data - I'm not tech-minded 😕😕

Im not sure how to explain this but in versions before, when i had to edit a whole series of pictures (like a play i photographed or a wedding), i didnt have to select the brush and set it for EVERY picture like i have to do now... If i want to do the same dodging or burning to say 200 pictures with the same darkening or lightening to that series of pictures but with every mask different and move from picture to picture without having to activate and set the dodging or burning, how do i do that? Or do i have to select the brush and effect EVERY time? Its so tiresome... I can press "K" and select the effect for the brush but i dont want to do that for every picture if a have to edit a whole lot of pictures... If anyone understands this question please help me... I dont know how to better explain this...

ACR 15.1.1.1329Is there some way to have ACR periodically save the edits? I was merrily painting away in a complex mask and got lost in time. I had spent some time adding and removing bits of the mask, and the masking was starting slowdown. Then suddenly ACR went away.Peter

Hello Everyone.I am using the Eye-Dropper Tool, using Custom, and when I click on Gray Card or any Color it only Zooms the Image. This is a very strange behavior.It never happened before. All I want to do is to create a Custom White Balance, but when I click on any image it zooms the Image instead of getting a correct White BalancePlease Help.Thank you very much.

Since a few days the Camera Raw (15.1.1.1329) window does not open anymore. Neither via Photoshop (24.1), nor Bridge (13.0.2), nor Lightroom Classic. The loading circle appears briefly, then nothing happens and the application can only be closed via the Task Manager. I have tried everything. Removed all programs and reinstalled. Installed a new video card driver. Changed preferences. Unfortunately nothing helps. I'm working on Windows 10 proDell XPS 15 9500NVIDIA GeForce GTX 1650 Ti

Everything seems to work okay. But after the fix and accepting it, nothing in the layer actually changes anymore. This is since the latest updates. Camera Raw 15.1.

Hello! On Windiws 10 platform Photoshop 24.1 starts normally, but when I try to open any raw file, it freezes. Presumably this is due to Camera Raw 15.1.1.After reinstalling PS the problem is the same.Someone faced a similar problem? Is it possible to down grade the Camera Raw?

If I convert RAW images of my newly purchased Olympus OM-1 to DNGs, the distortions of the lenses (last used: M.Zuiko 12-100 and 9-18) are not compensated in Lightroom. However, the same lenses are corrected in LR if I shot with the E-M 1 II, regardless of whether I edit the original ~.ORF files or shots converted to ~.DNG.used version:  15.1.1.1329 I attached an original .jpg out of the camera and an image converted as described

Moin, Ich versuche gerade von Lightroom Classic zu Camera RAW zu wechseln. Meine normalen Presets waren dort direkt zu finden, aber wenn ich mit nem Pinsel etwas maskieren möchte, sind dort meine Pinselvorgaben (die ich in Lightroom hatte) nicht mehr vorhanden. Wo finde ich den Speicherort für die CR Pinsel bzw. wie lade ich meine Pinselpresets da rein?Bisher finde ich nur die Option ein neues Pinsel Preset selbst zu erstellen aber das will ich ja gar nicht. Hat jmd eine Lösung? lg 

Hi, I have a complicated action workflow I am trying to fine-tune. In one step, a smart object layer is opened in ACR (in Photoshop). When it opens I click on the three dots (...) on the right-hand side panel and select "Reset to Default". Then I click ok and the action continues to run.  Here's my question. Since I will be doing this one simple step repeatedly for many different images, is there any way to automate it? 

Starting with Camera Raw 11.2, the cursor doesn't always change to reflect the tool in use properly. Here is the sequence to create the problem:   Select the adjustment brush (keyboard shortcut K) Move an adjustment slider (example, Exposure); value box is highlighted in blue. Use adjustment brush on image. The brush cursor turns into the default arrow, and the size of the brush disappears. Subsequent uses of the brush act normally. This ONLY happens when an adjustment slider is moved.   This same cursor behavior is true for all tools (straighten, crop, etc), if an adjustment slider is moved prior to moving the tool.   This is irritating, especially when trying to use the adjustment brush.   I'm on a Mac, OS Mojave 10.14.4