Camera Raw

For some reason, even when the square clipping warnings are on above the histogram in ACR, they don't change colour despite clipping in the image. However, the actual image will show red or blue depending on the clipping. Any way to get those little squares with the bounding boxes to work correctly (I tried using the U and O keys to turn them on and off but they still don't work). PS 21.2.12 and ACR 12.4.0 (cant find links to redownload those and newer versions will have to wait until my Mac is upgraded).

I’m working in ACR 14.0.0.950 with our Canon 5Ds cameras with 11-24, 24-70, 70-200, 100-400 L lenses and our DJI Air 2S. For some reason, I can’t get the moiré slider with the canons and it works with the DJI. I have had similar issues in the past, usually with dehaze. Any ideas? (Windows 10)

How do I find this screen I call the main screen in the new Camera Raw?       {Thread title edited by moderator}

I just upgraded my mac to catalina. I have now lost Ps 2019 but Ps 2022  warns me that i need to udate raw. It is updated in cc but in ps it shows and loads as 13.4.0.872. Maybe this is why 2022 is so glitchy. Zoom is really jittery and nigh on impossible to use. I had previosly stuck with ps 2019 because it ran really well. ps 2021 was rubbish as well. Unfortunatly that option has dissapeared after the computer upgrade.  Help me please. 

Es kommt jedesmal die Meldung "Datei ist nicht vom richtigen Typ" Kamera Canon EOS 6D Mark II

Widows 10 last version Photoshop 23.0 Update - Camera Raw 14.0 Camera Raw 14.0 crashes and I can't get back to the only working version 22.4.2.I am completely stuck.

warum verschwindet das Pinselwerkzeug beim Wechsel auf das nächste Bild, ich muss bei jedem neuen Bild, welches ich bearbeiten möchte neu anklicken - für einen schnellen Workflow ist das nicht wirklich sinnhaft, bitte um Lösungsvorschlag - Danke

Atualizei meu Photoshop para 2022 porem o ACR nao atualizou para o 14 o ultimo e esta na versao 13.4, porem no creative clound ja esta instalado a versao 14 do ACR, e no lightroom funciona normalmente, aparentemente o problema e somente no photoshop  

BOA TARDE. O CAMERA RAW NÃO ESTÁ FUNCIONANDO, QUANDO ABRO FICA UMA TELA TODA PRETA!

I have a 2020 version of Photoshop and Bridge that I have been running on a Windows 7 desktop for 2 years with basically no problems.  As of yesterday I cannot open a file from Camera Raw from Bridge or Photoshop, and cannot even open the Cloud App. When I try and open a file from Bridge I get the message that my Subscription has ended, (it is current!), and when I try to open the Cloud App I get the message "Cannot connect to Adobe Servers" and to check my internet connectivity, or my Firewall (which is fine, not changed!!!). I have had, and do have, the required TLS 1.2 protocol, and nothing else has chnged on my Desktop since I used photoshop last week. I took the trouble to reimage my computer from a week old B/U, to no avail., and even shut my Bitdefender Anti Virus thinking it could be intefering.   I'm stumped as to why I suddenly cannot connect to the Adbe servers to verify my subscription and use Photoshop.

There was a very useful half tone filter on the right hand panel in ACR. It has gone in the latest update. Does it still exist? This was one of my favourite tools.

Hi,I can't get ACR 14.0 to open images into Photoshop.  When I press the "Open" button on ACR, it opens Photoshop, but the image isn't transferred.  To get the image into Photoshop I need to return to Bridge, right click and select "Open in Photoshop."  Then, of course, the DNG opens first in ACR; NOW, when I push the open button on ACR, it will transfer the image.Sorry, I can't find a preference or adjustment that fixes the problem. Thanks, 

all my presets in camera raw dont work anymore. Camera Raw tells me they are e beta version. Can anybody help me. Thanks in advance  

bonjourquand je lance photoshop soit par CC, soit par bridge ou même en direct, une fois la photo à retoucher choisie c'est camera raw qui se lance mais inutilisable car complètement hors taille, je suis obligée de forcer la fermeture... comment faire?

Hi,My computer : Ryzen9 5950X , G.SKILL Royal Elite 64GB, MSI RX 6900 XT GAMING X .I am a photographer and i use photoshop almost everydays. 2 weeks ago i went to a bussiness trip and now come back to work and can't use camera raw now. Everytime i tried to load my preset and the computer just lost video signal to screen and hang there. Can't even use the power button in the computer to reset, i have to turn the AC power down and boot again. This only happen with CameraRaw, all other functions of Photoshop are work perfectly. I'v tried to re-install windows 10 and photoshop, re-install vga and chipset drivers but it did not help. Here are the video clip that describe the problem  : https://drive.google.com/file/d/17hj7pFx0zRbTa05W6Pf4PYRJGagIv9CO/view?usp=sharing 

In Lightroom I can turn off any modules in develop. And it stays off till I turn it on again. Why can't I do the same in Camera Raw 14?

hi so i updated all my apps. Photoshop and Camera RAW   the editing section either has a bug or has been changed in a bad way    i used to be able to have one screen open with Basic Adjustments and then ALSO with noise and sharpening sliders (detail). now i must toggle back and forth which is very time consuming. also when i go to the noise section the other tabs close and i have to re open everything again.. pls advise and thanks    

My zipped presets imported no problem into Lightroom, but ACR is having non of it.They appear to be imported in that the selected zip file is accepted, but they do not appear in the ACR Preset lists.  Any idea why ?I am using the most recent versions of all Adobe apps, and am on Windows.

I know there's a fix in progress for the mouse stuttering in Photoshop 2022 v23.0, but consider also RAW file opened with Camera RAW (before PS open) that have problem of "blackout screen effect" if this workaround is used.  

I was editing about 800 photos in camera raw and overnight my computer shut down, consequently, photoshop closed, I tried to open the same files again and they are no longer edited.Can I recover these files already edited somehow? or at least activate something autosave in case it happens again?

I think this is a bug. At the very least, it's different than the previous version of ACR:ACR 14.0 no longer "remembers" the Invert setting for the mask, regardless if "Reset Sliders Automatically" is enabled or not.   Additionally, a masking adjustment preset doesn't include the "invert" setting. For example:   I can save an adjustment preset with slider settings, but if the mask is "inverted" the effect is the opposite unless I recheck the "invert" button each time I bring up the mask preset.Previously, if the "Invert" setting was carried along with the slider settings. Please see if this can be fixed.

My Camera Raw filtering has made a strange previewing page where there are black bars and checkered squared as well as parts of layers that are cut out of the actual project. I cant seem to find out how this came to be or how to get rid of it...any help would be incredibly appreciated.

Using Windows 10. I installed Bridge ver 11.1.0.175 (updated today), Photoshop Elements (PSE) 2021 (properly registered on Adobe), and Adobe Camera Raw 14 (ACR). When I attempt to open a photo in Bridge using ACR, I get the message, "Camera Raw editing is not enabled...  requires qualifying product has been licensed." I have read on this forum and elsewhere that Photoshop Elements is a 'qualifying product', so that is puzzling. If I double click in Bridge to open the photo in PSE, it opens in ACR 13. If I go into PSE first, and click on 'Open in Camera Raw', it opens in ACR 13. How can I get it to open in ACR 14 from either PSE or Bridge? (Preferably Bridge if I have to choose between the two!)  I've looked at numerous posts on the "Camera Raw editing is not enabled" theme, but didn't see this particular issue. Appreciate any assistance!

Downloaded and installed all new LR, PS, CR software yesterday. Creative Cloud says Camera Raw was updated to version 14 yesterday. However, when sending a photo from Lightroom to Photoshop I get a message that Camera Raw plugin needs to be updated. If I open Camera Raw plugin from within Photoshop 22, it is the old version, not v 14. How can I help Photoshop find the correct updated plugin?