FrameMaker

When the user opens a book file and try to edit the chapters, every chapters takes around 5 seconds to allow editing. Is working under Windows 10, the user complains because it says it loaded inmediately with Windows 7. What could I check to improve this loading time?

Dear all,I want to support certain palettes (modified equation palette, vertical tool bar) for higher resultion screens. You all do know the passage from Help/User guide:FrameMaker's user interface is now compatible with high-resolution screens ranging up to 3480 x2160 pixels. Earlier, when you launched FrameMaker on a high-resolution display device, the text onthe user interface would render too small. You would have to use a workaround to overcome thisproblem for earlier versions of FrameMaker. However, starting from 2017 release, FrameMakersupports high-resolution display devices. The user interface and all text automatically resizes as perWindows display settings.But there no mentioning of when size small (100%), medium (150%) and large (200%) of the icons is taken. In particular, is the medium size taken for Windows zoom factor 101 … 150 or what?Can somebody give me a hint?

I've tried twice today to post a procedure for accomplishing this. I titled it:PROCEDURE FOR CROSS-LINKING BOOKS IN UNSTRUCTURED FRAMEMAKER FOR PDF OUTPUT. Each time I do it I get back that it might be SPAM, and it does not get posted. Is it not possible to post solutions to problems? It's very odd. I'll copy/paste it here. Hello Adobe FM community.Summary: This is a procedure to allow multiple books in unstructured FM be cross referenced. Note that a setting in Acrobat Pro/Reader is also necessary. In this example my only desired output is PDF.I have a project where I must heavily cross-reference 24 books. I am posting this procedure in case anyone runs into this problem. I want this to be crystal clear. My apologies for the lengthy explanation.In this example, all .book files reside in the same common directory. Additionally, each PDF generated for each book will reside in this same directory. (The actual .fm files the book is comprised of can be in another folder).Create a

I'm resurrecting this discussion as I am in the middle of creating cross references between books. I'm interjecting at this point in the discussion thread because it appears it's the appropriate part of the discussion.   Summary: Using FM2019 unstructured, I am creating PDF output only. I have 24 books. They will be heavily cross referenced. I have been able to get this to work. Sort of...   I'm noticing an odd behaviour in Acrobat Pro.  I have a cross-reference in (what I'll refer to as) book3 which points to a section heading in book2. This works. Thank you BarbBinder and Bob Niland for your insights.   However: I have book3 open using AcrobatPro. I click the cross-ref in book3 to open book2. Book2 opens and takes me to the desired location, but book3 is nolonger open.   If I then, (using Acrobat Pro File->Open pull-down) open Book3, it opens. Now the one instance of Acrobat Pro displays both book2 and book3. But if I then click the cross-ref in book3 so I

If we could cross-reference to a specific phrase within a paragraph, spot cross-references would be easier to create and maintain than the current system. While I would still like to see the <$markertext> building block available in cross-reference formats, being able to xref to a character tag would be more efficient in many situations. If you agree, you can vote for this feature at  https://tracker.adobe.com/#/view/FRMAKER-7696   VOTE button is in the lower right of the tracker window

I've already installed and reinstalled my Adobe FrameMaker 2019 64-bit but still can't get it to go past the splash screen. I'm using it on a Windows 10 Enterprise 64-bit. It was working fine last week, but this week when I tried to open it again, it just failed. The last time I used it was last Friday. Wondering if it got affected by a disk and browser cleanup I did. I also installed it via the ESD program. 

Can we open FM11 files with FM10?

Hello all,Thanks in advance to anyone who reads this. I've used FM for many years but have never tried this, and am wondering if it is possible. I'm thinking it is, I simply have never had need to do this. I am using FM unstructured documents.  To explain: I have a book comprised of multiple documents. With the finished PDF, I want the reader to be able to click on a term which sits within a paragraph in a table and have FM take the reader to a table in a separate document which contains a description of this term. I also want to be able to define what displays on the source entry. In other words, I want what the reader clicks on to display whatever text I want it to display. So, I:1. create a cross-reference marker where the term exists in the destination document and table.Then I:2. go to the source document and table, highlight the term where I want to cross-reference to be invoked, and go into the Cross-Reference window to try and create the reference.  But

If you'd like to see the ability to use a <$markertext> building block inside of cross-references (especially useful for spot xrefs to markers) the please vote for the following feature request https://tracker.adobe.com/#/view/FRMAKER-7695   The VOTE button is likely in the lower right corner of the tracker window

I am unable to publish my DITA bookmap if the DITA topic files are saved as .fm. FM says: "An error occurred in the publish process. View the log file for more details" log file says: Unable to publish. "Validate XML source files and retry". It works if files are in xml format. Is the publish in HTML5 format is meant to work only with xml files?

Hi! I am publishing Responsive HTML5 from .ditamap with looooots of xml-files on different levels. I would like the output to have numering on different levels (1., 1.1., 1.1.1. etc.) both in the TOC of the webpage and in the page titles. How do I do this?  I have tried changing numbering with Paragraph designer in Document view, but that doesn't help, since it appears outside text tags. Or that's why I think it doesn't help, for all I know it could be anything else, too. I also do not have Style Mapping tab in my publishing settings, should it always be there with ditamap? In case someone suggests style mapping as a solution. For all other formatting I have a .css file as override style and that's working fine.  Should I try to search the jungle of  FM to find solution or perhaps ask some html/css wizard whether they could do it with the .css? Thanks for any help!

Register now for the free webinar on 14th January 2020 Register at : https://2020-01-14-stepping-up-from-word-to-adobe-framemaker.meetus.adobeevents.com/ Stepping up from Word to Adobe FrameMaker (2019 release)   Presenters - Matt Sullivan, Founder of Tech Comm Tools Tuesday, January 14, 2020 8-9 am PST | 17 - 18 CEST | 21:30 - 22:30 IST     With Adobe FrameMaker(2019 release), all-new 64-bit architecture, you can significantly boost productivity with more memory and amazing speed improvements for long, complex documents. Whether you have already decided to transition from Word to FrameMaker or you are still examining how moving away from Word would help you, this webinar will be invaluable.In this session, Adobe Certified Instructor Matt Sullivan will demonstrate why FrameMaker is so much more efficient and how you can transition your complex Word documents into Adobe FrameMaker 2019 without skipping a beat. In this free webinar, you will learn: Advantag

I'm having a mini-TOC issue: FrameMaker 2019 v15.0.4.751 Heading2 has auto-number defined as: a:Part < ><n+>. In this file, the part number is 2. Footer is correctly picking up the part number using <$paranumonly[Heading2] and displays a 2. X-refs are correctly picking up the part number using <$paranumonly[Heading2] and display a 2. Mini-TOC is not. Instead <$paranumonly[Heading2] is picking up the Heading3MTOC & Heading4MTOC numbers.   MTOC Reference Page   MTOC on Body Page The numbers in orange on the right should all be a 2, representing the part number for this file. Instead, they are displaying the numbes from the beginning of the MTOC line. What am I doing wrong?   Thanks in advance, ~Barb

Hello. We have custom API client for FrameMaker and we are migrating it to FrameMaker 2019. We have defined a new menu with lot of submenu. We use keyboard shortcuts such as Esc Wfi.. But it doesn't look nice in menus. Is there a property or some FM settings to hide it but shortcuts still functional?See this for example of menu shorcuts: 

Hi,   I am not a CCS expert. Therefore my question might be basic for you. In my documents the warnings are in single row tables with two columns. Left column is the warning icon. Right column holds the text. Below the column is a line. I had set up these warning tables in CSS, and almost everything works well. Only the distance between the text and the border below the table is too large. I had set the table height attribute in CSS to auto. However, the conversion sets a height which depends on the number of text lines in the table in FrameMaker. I can see this when I decrease the width of the browser window. The distance is kept, until there are as many lines as in the FrameMaker table. When I decrease the window width further, the height adapts to the current number of lines It does not help, when I set the table height in the CSS to e.g. 10px. Or when I set the height of the various rows separately to auto or 10px. Still there is this large distance. Only when I change the val

Hi Hoping someone can help with the below. We have recently upgraded from FM11 to FM2019 due to Win7 upgrades to Win10. Main issue is when trying to insert an image, it will open a window to browse to the file and after a few seconds it will freeze for about 5 seconds, then crash with error 'Adobe FrameMaker has stopped working and must close'. I've sent the logs to Adobe and they were unable to resolve the issue. I checked event viewer and the error appeared to relate to .net framework, does anyone know what the minimum .net framework requirement is for 2019?. Has anyone had similar issues? It also crashes when trying to save as PDF..   Thanks

Hi!I am working on manuals that are ditamaps with xml files as child topicrefs. I am doing manuals for the same product but under a different brand name and, therefore, it is most economical for me to copy the orginal product's and brand's manual and then just change names everywhere etc. However, I have been unable to discover how to change the map title of the ditamap. This is not a problem untill I convert the map to .book file and further save as pdf. The map title is very determined to stay in the top of the book document and also appear as the title of TOC. Therefore, it has to be changed to match the correct brand. This ought to be a simple thing, however, I'm yet to discover it. Many thanks for all tips!

Hello Adobe FM community.I have a project where I must heavily cross-reference 24 books. I've read all the posts regarding how to get this to work. I'd like to document the procedure as clearly as possible and see if anyone might comment. I want to take it step by step and make sure I have it all crystal clear. My apologies for writing absolutely everything out. This initial post will cover the folder structure setup, and nothing more. What I've read suggest that I must:1. Create all book files in the same folder. Let's call the folder C:\RegulatoryBooks\For example, this folder will contain all my 24 book files, so it will look something like this:C:\RegulatoryBooks\RRI_01_Introduction.book                                 \RRI_02_Common_Data_Types.book                                 \RRI_03_Constructing_Rep

I'd like to use an image (checkbox_yes.png) instead of a bullet, so as to represent one or more enabled system options instead of inserting full or cropped screenshots. I know I could probably set up a special table for this, but this doc already has too many tables as is.The FM Help only discusses using different fonts to replace bullets, but not images.Can someone help?Thx

Well, despite administrative hassles and an astoundingly slow network, I finally managed to download the TCS .zip. But here's what happened so far:download TechnicalCommunicationSuite_en_US_WIN_64.zipunzip – result, folder "Technical Communication Suite", containing Technical Communication Suite.ccp plus subfolders Build and Exceptionsexplore subfolder Build, containing subfolders plus setup.exe and Technical Communications Suite.msirun Technical Communications Suite.msi – a few moments of progress thermometer, then "Adobe Installer has stopped working"Am I supposed to run setup.exe first / instead? or am I really expected to run the snazzy new .msi installer, but something has gone wrong? A bit more "technical communication" around the Technical Communications Suite might not come amiss :-}

Hi, I am working on an Arabic manual and am having issues with the numerals in the content. As of now they are in a Western-Arabic format (1, 2, 3...), but I would like to have them in a Eastern (Indo)-Arabic format (٠‎,١‎, ٢‎, ٣‎). Is there a way to do this without too much hands-on work? I've managed to get numbered lists and page numbering to the correct format. Much appreciated for any answers. 

Update Book has an option to apply master pages. If a body text frame on the resulting pages has a different size than that on the original page, content might overflow onto new pages. The new pages should use the master page specified in the master page mapping table. In some cases, however, the new pages use the default master page ("Right" in a single-sided document, "Left" or "Right" in a double-sided document).   This seems to happen to documents that are closed or open but not visible. Opening all documents in the book and placing them in separate windows with Window > Tile before updating the book produces the expected results.   I have provided a more detailed description and sample files in https://tracker.adobe.com/#/view/FRMAKER-7650.         --Lynne

Is the 196 the patch for Adobe FrameMaker 9.0.1 (p230) update?

In Framemaker 2019, how can we use the Change Bar character tag WITHOUT it causing an override of all the other character tags in the same area?  

I publish responsive HTML5 online help for my company's software. When I started using FrameMaker, it was with FM12 which handled hooks and filenames very well. When we upgraded to FM2019, I cannot follow the same steps and get the same results. We need a constant file name for each page (*.htm) file in the responsive help. In FM12, the CSHelp_Hook allowed us to specify a constant name for the page's filename in the help. In FM2019, it ignores the hook and always uses the section header as the filename. This is okay for our English version but we send out for translations. When the file is translated, it tries to use section header, which is now not English, instead of using the untranslated file name that we need it to use. Any idea of what might be going wrong and how to fix this?