FrameMaker

What is the best way to associate "Effectivity"  for a <graphic> ?  In this example, I need to associate <graphic> = "ICN-44-30-01-01of10.png" with  <applicRefId>?Or would you associate it using <caveat>?Would it be too much trouble to try to associate it using <applicPropertyValues>?What is the best way?

Hi,I have a problem. I am trying to PDF Chinese in FrameMaker 15.02.503 and the words are coming out incorrectly. The font used is Microsoft YaHei and the problem occurs in my heading style but not in the body style.The following is the heading in FrameMaker:使用软件媒体和安全USB设备In the PDF, the heading looks very different, like this.https://bit.ly/2BajUC1Again, I do not have the same problem with my body content.Any thoughts about how I am screwing this up?Sean

Hi FrameMaker friends:Where did that checkbox go in FrameMaker 2019? I want to output each chapter of a book as its own PDF—all at one time!~Barb

With Adobe Creative Cloud applications nowadays, we can choose to install any of the previous versions back to CS6.A client of ours wants to purchase FM 2017 however, currently they can FM 2019 only. So is there any way for the client to downgrade to 2017 release after buying 2019 release?I don't suppose this link is any useful to this client for 2017 download as they need a serial number of the 2017 right?

I am using 13.0.5.547.  I do not reference a file by the name 85076.  What causes this error?1. I have Adobe Acrobat Pro set as my default printer.2. Rely on system fonts only is unchecked.3. Generate Acrobat Data is checked on to create a .ps file.I am trying to resolve an issue where some cross references within my Book do not work in the PDF but do work within Framemaker.

Hi,Today, I installed FM 2019 Release Version: 15.0.0.393 32 Bit. (I was working with FM 11, and after going to Windows 10, I encountered the no-PDF/crash problem, and ended up using the CMYK workaround.)I saw that the PDF output from my new FM 2019 is CMYK(!), but I want RGB -- and FM crashed after generating the PDF, just like with my FM 11. I read that the October 2018 FM update enables RGB, so I tried updating (Help > Updates). I got an Update Conflict, but I did not see the processes mentioned. I then got an a Error Code 87, which goes away only after I reboot. Any suggestions?Thanks

All of a sudden I'm having trouble creating a PDF for a document that uses Proxima Nova. I get the font as an asset from Creative Cloud. It used to work fine. I can save documents as PDFs just fine as long as they don't contain Proxima Nova. I can't figure out what changed recently. This happens on multiple documents so I know it's not a document issue. It happens on my older version of Frame 10 and on Frame 2019.Any ideas?

Is there an alt code for a lower case theta that works in Framemaker? I've tried a couple I found on the internet, but they don't work - they appear as some other symbol.Thanks, MK

I use TCS 2017 release. One file of my book contains a specific font (a webfont my company develops for its software).I cannot convert that file or that book into a PDF document, unless PDF option “Rely on system fonts only; do not use document fonts” is disabled.But when this function is disabled, there is no link in the PDF document: cross-references, the TOC, the Index, nothing can be clicked.

I use autonumbering paragraph format for repeated text such as a command prompt "CLI  (admin@leaf1)>" but when converting to HTML the autonumber doesn't appear in output. It only displays what comes after the autonumber text. So  CLI  (admin@leaf1)>switch-setup-show displays as switch-setup-show without the command prompt text. Also, importing images from the reference page works for some of the images  but not all. One appears so small it looks like a dot not the image.Any ideas?

Hello framers!I don't see a way to restrict checkbox selection in the Medit dialog box to only one out of X. Is this possible?Many thanks!Roman

I acquired another doc set and my notes are formatted as  follows:I want to change the lines to black.Thank You

As other threads have already covered, I've been updating an application from FM8 to FM2019 and I've just noticed what appears to be a change in behaviour that I'd like to understand.When a user opens one of our XML documents in Frame, a pre-processing stylesheet is run which "expands" the document, pulling in the content of "included" sub-documents. This means that instead of having perhaps twenty-five separate tabs containing separate parts of a document, the user is able to edit in a single tab. When they save their changes, a post-processing stylesheet "collapses" the document into its constituent parts.So if (say) the original document a.xml contains the element<include srcfile="b.xml"/>then the preprocessing step transforms this into<included srcfile="b.xml">  <document..><title id="b1">Document B"</title>...</document></included>Frame presents the user with what appears to be a single document, and the structural view shows an "incl

I am converting unstructured documents to structured documents. I have a "Paragraph" element, which allows "ParagraphTitle" elements, <TEXT>, and other "Paragraph" elements under it (simplifying for ease of explaining the issue).The "ParagraphTitle" element has the following EDD:Element (Container): ParagraphTitle     General rule: <TEXT>     Text format rules          In all contexts.               Text range.               Font properties                    Underline: SingleThe "ParagraphTitle" element comes at the beginning of the "Paragraph" element. The problem is that after the conversion the underline character formatting is bleeding into the parent ele

I am stuck on a student question...Her client wants to add letters to the running heads to indicate chapter subjects. For example, Chapter 1 might be on Safety, so page numbers should be S–1, S–2, S–3. There is nothing to grab from the page, but easy enough with user variables. Chapter 2 might be on Transportation, so page numbers should be T–1, T–2, T–3.But then she wants that same numbering in the TOC, and I'm hitting a wall. What am I missing?~Barb

I am working on a project and I need my TOC to display alphanumeric page numbers for my appendices.  The actual appendices have appropriate alphanumeric numbering.  However, when the page number display in the TOC, it is just the number "1".  I tried going to the reference page and put "A+-" for the appendices following Appendix A hoping it would then provide "B-1", "C-1" and "D-1" but this did not happen.  I got "A+-1" for all appendices. I also tried putting <$paratext> before the <$paranum> but that did not work either.Thank you in advance for your assistance!Edrice Angry

2019 Release, Version: 15.0.2.503I was editing a 51 page *.fm file, and now I have random green and underlined text.  It does not seem to respond to changes from paragraph, or character designer - they don't even seem to recognize it as green and underlined (but it publishes to PDF as green and underlined, and on FM screen as well).    When I highlight a section of the green text and select a different style from the character catalog, it will change the weight, angle, and variation, but it stays green, and stays underlined no matter what. The only way I have been able to change it back to to match the surrounding font properties is to highlight it, ctrl+c and immediately ctrl+v.  It pastes back as normal.I don't know that this is what triggered it for sure because I didn't notice it until later, but I did perform a Find/Change operation, and hit change all (the whole book).  That is not a normal procedure for me.

I want to edit a system variable and then save it as a new variable. The variable is for the short current date and we have a format we use as an example, 9 Sep 2011. Can this be done?regards,

Reading another discussion about using FM's Alert hypertext marker to generate sticky-note comments in PDF output, I was thinking this would be a good addition to my group's toolset, to flow our editorial comments and questions back to authors and other stakeholders. When I tested it, though, I got unexpectedly inconsistent results.For reference, we use unstructured FM2019 and Acrobat 2017 Pro (within TCS2019) to publish books (i.e., no dynamic/online formats required). I tried inserting an Alert marker in text in a few different files and created PDFs in a few different ways (i.e., print, save as, publish), and I got varying results:In one file, the marker turned into not one, but three PDF sticky notes, identical to each other but scattered around the marker location. I tried deleting and reinserting the marker, and tried outputting to PDF in all three ways, but got the same result each time.In another file, I got just one sticky when I used save as and publish to generate a PDF, but

What Structure (Topic/Concept/Task) should I use if I need to accomplish multi-level numbering as shown below???Chapter Title.....Section1.....     1. xxx     2. xxx          a. xxx          b. xxx               i. xxx              ii. xxx                    1. xxx                    2. xxxAlso, can I add Figure or Table at any level?Thanks.

Not a FrameMaker question, per se, but... I started asking a question as a reply in an existing discussion, and then decided it should probably be its own separate thing. So I selected the text, cut it, canceled my reply, opened a new discussion, and tried to paste my text into the text field.Nothing. Neither hitting <ctrl>-v nor right-clicking and choosing Paste produced any results at all in the forum window. I know the content was there in the paste buffer, because I was able to paste it into an open FM file, but I couldn't paste it here, and ended up retyping it all. Is that the way the forums are supposed to behave, or is it some kind of user error on my part?

I'm working in a new book that I created. The text is in English. There are only maybe 0.3% of the words in German. Inspite of this, the spell check tells me that all words in the vicinity of the single German word are wrong, because they aren't German words. I don't want to spell check in ANY other language. I'm somehow not seeing where I can specify which dictionaries to use in this book to spell check. Only HOW to use them (2 options). I see the ability to turn-off the spell check entirely, but that's undesirable.  I would have expected to be able to control this "feature". I don't want to have to check a bunch of words, because FrameMaker 2019 thinks I'm doing a polygot book.Does anyone know if this is possible?

Just trying to set up FM 2017; while trying to set up EDD rules for my output templates, FrameMaker is crashing constantly.Usually all it takes to cause a crash is trying to scroll through structured view or expanding a collapsed tag or structure item.Sometimes the crash is so bad that I have to restart my computer to get the FM processes to actually stop.I sent all of the crash logs to fmerror@adobe.com but the message bounced. Anything I can do? I'm currently on a 30-day trial so I can get it set up before my boss(es) pony up for licenses. I got FM11 working successfully at my previous company so I really talked it up at this new place. Not making a great first impression here, though...Edit to add: I have tried uninstalling and reinstalling FM2017. I have also noticed that the crashes tend to happen with the referenced sections of EDDs. I can open the modules without too much trouble.

My (2017 release) FrameMaker file contains web fonts (the Font Awesome you can download there: https://fontawesome.com/icons?d=gallery&m=free).When I "Save as PDF" my FrameMaker file, I get an error that says: 'An error occurred when opening thie file. File cannot be found'. No PDF file is produced and if I was replacing an existing pdf file, that pdf file is deleted.When I use the PDF printer, in the options I uncheck option 'Limit to system fonts, do not use document fonts.' (in French Se limiter aux polices système, ne pas utiliser les polices du document.) and the PDF file is produced. But that pdf file contains no links (I have several cross references). So I cannot send that pdf document to my customers.I checked my Acrobat Settings, but I couldn't find any similar font option in the joboptions files.I hope that you can help me produce a PDF file containing both web fonts and hyperlinks! Thanks

I wrote a script that actually works, but I'd like for it to automatically run whenever I save the Framemaker (19) document. It seems like there should be a command for that but I can't find it. Thanks!