FrameMaker

First, here is a picture to illustrate what I am trying to do:Given an ElementRange, I am trying to find the upper and lower boundaries of that range, as in the FP_LocY values (show visually in yellow). The upper value is easy, because I can get the top element in the ElementRange. But I am not sure the best approach for getting the lower value. Any help will be appreciated. Thanks.-Rick

Hi everyone,I am working on a complex script to search and replace certain terms. In essence, it searches for the offensive term, shows it on the screen in the file and gives you a dialog box with a suggested edit. Everything works great, but when I'm processing a book, it doesn't pull up the found text range and display it on screen. If you run the script on just a single file, it works great and you can see the offensive term in context. But if you run it on the book and progress your way through the chapters, the file displayed on screen never changes. I know it's running because the display line at the bottom of the book window lists the file it's checking. It just would be nice for users to see the context of the offensive term.I've tried calling ScrollToText and Redisplay just after finding the term and neither have any effect. I'm guessing that the focus is on the book and that prohibits the focus to switch to the file?Any ideas or suggestions of things to try would be very much

We have problems with Fonts which are not available in FrameMaker although we have installed them in Windows Font Folder.

The question has been asked before (in 2013!), but is still marked unanswered. So, once again:I have a FM book, let's call it "Basics", which should include a lot of references to a PDF doc (which is NOT FM-based), let's call it "Supplement.pdf". When I print "Basics.book" to "Basics.pdf", I can add so-called deep links from "Basics.pdf" to "Supplement.pdf" using Acrobat DC. No Problem with that, but when I update "Basics.book" and have to produce "Basics.pdf" once again, all the linking gets lost, of course.So, all I want to do is place these links in the FM documents included in "Basics.book" and propagate them to "Basics.pdf". According to a sample table entry on the Adobe FM web help, the gotolink syntax of FM should support named targets. But apparently it doesn't, since the referenced document always opens on the first page, and not on the page the target refers to.I'm using FM 2015 (structured), and yes, the target I'm trying to refer to does exist in the other PDF file, and yes

Wir brauchen für ein Projekt besondere Schriften und daher etwas ähnliches wie den Type Manager. Type Manager steht z.Zt. also Download nicht zu Verfügung. Wir haben bereits recherchiert.

Hi Adobe Framemaker Community,I am currently a newbie evaluating whether Adobe Framemaker 2015 will be a viable solution for where I work to support DITA authoring.Two must-have key features that we are looking at to support our DITA content are the following:Versioning & Branching"In most DITA authoring Editors and corresponding DITA supported CMS, there are two ways of versioning content, branches and version releases.Creating a version release for a topic creates an  unalterable archive of the content at that specific point in time. It’s useful to create a version release for each new version or milestone because then the archive can be viewed after you’ve made changes to the file or to generate output from it. Branching a map creates copies of each of its components in a new branch. It allows you and others to edit the branched content without altering the master branch. If you want to push changes between the branches, you can do so when you need to. Branches are differen

We are a small book publisher and are currently using Framemaker 10. We need to upgrade and could use help deciding what is best to purchase. We have 2 users using both Framemaker and Acrobat Pro. Thanks.

Is there a way to make text wrap or insert a carriage return in a side-head? I have a paragraph format with an autonumber format that is two words, 15 characters total, and a side-head alignment. The text does not wrap, it just overlaps. I'm sure there's a way to make it wrap, but I have not been able to figure it out or to find anything by internet search. Has someone run into this before who can help me fix it?

I can insert the cross-reference using Special - Cross-Reference and "Source Type: Paragraph" but then when I click on "insert," the Source Type changes to "Cross-Reference Markers"  which I don't want to use.  Why is it changing?  This happens randomly, and I haven't figured out any way to use only Paragraphs as the source type for cross-references.

I am using the framemaker2015. when I open the book.file, it shows the structure like that: NoName, containg several Book- Components, corresponding to several sections of the book. Meanwhile, the red line occurs in the structure. But when I only open the fm.file of the book, it does not show any sturcuture. Can you help me to solve this problem?

Hello,I am building in a FM 12 structured app for the Army's MIL-STD-2361 XML. The <xref> cross-reference element has multiple IDREF attributes, each specific to its associated element. For example @figid is for <figure>.If this is a read/write rules issue, I can't figure out what it is. I get an error if more than one property cross-reference id is used.Here is the DTD for <xref><!ELEMENT xref EMPTY><!ATTLIST xref    taskid IDREF #IMPLIED    wpid IDREF #IMPLIED    stepstart IDREF #IMPLIED    stepend IDREF #IMPLIED    figid IDREF #IMPLIED    itemno CDATA #IMPLIED    itemid IDREF #IMPLIED    callout CDATA #IMPLIED    tableid IDREF #IMPLIED    tslocid IDREF #IMPLIED    pagelocid IDREF #IMPLIED    pretext CDATA #IMPLIED    posttext CDATA #IMPLIED    termde

Can I create multiple mini-toc in a chapter? For example, at the chapter level and the H1 level?

Hi there,I am new to scripting. I need a script for updating cross references in a book. I am using licensed version of Frame Maker 10. I am using Extend script.Thanks,Isha

I think the search for this forum must be broken. Surely there have been questions over the years that use the term "override."Anyway, every time I switch from a certain master page to the body, I get the message asking if I want to maintain the override. I have looked and looked and cannot figure out what on the body page is overriding the master page. How can I find out what Framemaker is choking on? I'm using FM 12 in Windows 7.Thanks!

Framemaker 12:- I have set up an EDD with Context paragraph formatting. When importing into my document, the Log file displays two messages:-Referenced font weight (12pt) does not exist. Property was not imported.Referenced font weight (14pt) does not exist. Property was not imported.I have looked in my font directories and the font families are there (I tried Arial and Calibri). In the Framemaker size drop-down, 12pt and 14pt are displayed. In another context rule, 18pt Calibri was specified and that worked OK.Can anyone advise me how to resolve this?Cheers,Graham

FrameMaker 2015: I am unable to generate anything from the "DITA > Generate DITA-OT output" menu command.First problem was that trying any of the three output options in the Generate DITA-Output menu produced a command window with this error:Unable to locate tools.jar. Expected to find it in c:\ProgramData\Adobe\CS5\lib\tools.jar.Buildfile: c:\Program Files (x85)\Adobe\AdobeFrameMaker2015\fminit\ditafm\DITA-OT\build.xmlI had no c:\ProgramData\Adobe\CS5\lib folder, but found a "\lib\tools.jar" file in my Java directory, and copied the "lib" folder to the location that FM was looking for.That at least made that error message go away, but produced a log file with this error:BUILD FAILEDC:\Program Files (x86)\Adobe\AdobeFrameMaker2015\fminit\ditafm\DITA-OT\build.xml:113: The following error occurred while executing this line:C:\Program Files (x86)\Adobe\AdobeFrameMaker2015\fminit\ditafm\DITA-OT\plugins\org.dita.base\build_init.xml:99: java.lang.UnsupportedClassVersionError: org/dita/dos

hello experts,My client is using FrameViewer 5.x and I could not find any information for it.Could anyone please let me know for any documents available.Also please let me know if it is supported on Windows 10 (64 bit). Also if it has any supported version available.Thanks in advance...Thanks,Aj

I would like to create a Hypertext link to an Excel file. Is this possible?Thanks

Hi, I have not found any info about how to do a slient installation of adobe FrameMaker 2015. My goal: do a silent installation with my valid serialkey and automatic updates enabled.Is there any command line reference to use?, do I need any special adobetool?.Thanks in advance.

I need to call a Window's program, compiled in a different language,  from A Framemaker2015 script?I have seen "shell.run("file etc.) listed for other Java's.

Before I post a feature request, I'd like to know if there is any way to change book file names other than by doing it one file at a time in the book. I can't be the only person who has needed to rename a set of book files all in the same way. For example, change book files from Alpha-1Intro, Alpha-2Getting Started, Alpha-3Doing X, and so on, to Beta-1Intro, Beta-2Getting Started, etc. For these cases, a filename "bulk replace" function that would allow you to change part of the names in the same way would be so helpful. Is this asking too much, or is it too unique a need? Thanks

I'm a retired EE who has used FrameMaker starting with version 1 from Frame Technologies, up until I retired, at which time I chose not to upgrade my then-current Frame 6.0. I still use FrameMaker for all kinds of jobs. perhaps not to the depth as when I was in industry. Recently, I've found there's a good market locally for formatting books for print, something I used to do a lot of, but I ran into a problem.In 6.0, when I printed a book file with 5.5" x 8.5" to PDF  with crop marks, I found the print size was not accurate, and was in fact 5.2" x 8.3" between the crop marks. I read online that this was a known bug in 6.0, so I just bought a subscription to 2015, and installed it. While the setup is a bit different, it's enough like 6.0 that I didn't feel baffled, but my PDFs with printer's marks are still about 3.7% small, and submissions to Amazon CreateSpace complain about those borders.Does anyone have any experience with this? (I hope I found the right forum, but none of the

Newbie to FM (well, not exactly, as I used in on a Unix machine long, long ago).Framemaker 2015Is it possible to use the Word style-to-?tag? mapping (not sure of FM's terminology) to ease content development?That is, working from an existing FM file with an array of paragraph and character stylizations, can I create styles in Word whose style names correspond exactly to those in the existing FM file? And will the conversion neatly and simply turn the Word content into the correctly-styled FM result?

Hi.I am facing the following problem:Suppose that I have the following paragraphs in FrameMaker:This is a sentence. And   (simple line end)also there this sentence. (paragraph end)This is a sentence. And   (hard return)also there this sentence. (paragraph end)This is a sentence. And   (simple line end)also there this sentence. (hard return)But there is also this sentence (paragraph end)This is a sentence. And   (simple line end)also there this sentence. (hard return)also there this sentence. (hard return)But there is also this sentence (paragraph end)What I want is the following:Get the whole paragraph text where the insertion point of the cursor is.However, when hard line ends exist I want to change behavior.Here is the behavior for the above paragraphs:For the first paragraph example if the cursor is either in first or in second line I want to get the whole paragraph.For the second paragraph if the cursor is in the first line I want only the fi

I am using FrameMaker 12 (version 12.0.4.445).When I access the Cross-Reference pod, I have noticed the following software problems:-If I click the scroll bar a few times to go up or down the list, the scroll bar freezes.-If I scroll through the list and then click on a cross-reference, I cannot select it. The software selects a random cross-reference instead of the one I previously selected. Have you experienced the same cross-reference problems when using FrameMaker 12 and found a resolution? Thanks in advance for your help.