Lightroom Classic

I am on a 27 inch Mac running High Sierra. I have a subscription to Adobe for LightRoom and Photoshop. Both are up to-date. Can some please tell me how I can activate the comments area in the Metadata area on the right side of the panel at the very bottom of Library panel.I want to add a few comments for the photo and cannot seem to activate it to add comments. Below the Comments panel, it says “Comments not supported here” Thanks for your help….Tunney

Thursday, October 17, 2024 Welcome to the Lightroom Classic community monthly newsletter! Each month, we bring you all the essential highlights to keep you up to speed with the latest in the Lightroom Classic community. From inspiring content by Adobe creators to must-know updates that enhance your editing workflow, we’ve got everything you need to stay connected and creative. Dive in and explore what’s new this month! Get Lightroom Classic Featured Content It's Adobe MAX week! Check out the top new features in Lightroom Classic At this year's Adobe MAX we introduced some great new features like Generative Remove, Denoise support for linear DNG files, Digital asset Content Credentials, and enhanced tethering support for Nikon. Click the link above to read about this and more!  Easily eliminate distractions with Generative Remove in Lightroom Classic Take a quick tour of the Generative Remove tool in Lightroom Classic and see how easy it is to remove unw

Has anyone's Lightroom ever done this? I don't know why or how to get it off. I normally close the app and try reopening but it normally stays for some time and randomly goes away after closing and reopening multiple times.   I'm using version 14.1

I keep all my Lightroom Classic files on an external drive. Today when I opened LrC, it recognized some, but not all of the directories on my external drive. I keep folders by year and the Library module of LrC only sees up to the year 2020, but the drive has folders all the way to 2025.  Any ideas on why this would happen?  I did reset my Windows and had to reinstall all the Adobe apps recently. Would that be a part of it? Thanks in advance. 

Hey, I’ve been using the AI noise reduction feature for weeks without any problems, but starting today it’s no longer available. I only get a message saying: “Noise Reduction is currently not supported for this format.”I haven’t changed my computer or camera, and there’s no option to update to a newer version of Lightroom either.I’m using a MacBook Pro with Lightroom Classic version 14.2, and I’ve made sure the photos are in RAW format (.CR2 — I shoot with a Canon).  

After editing images imported from camera memory card, when is it safe, and how do I eject the card?TY

I have created a new Calogue as the old was not any longer usable.Everithing went OK, but the name of the folder are listing a question mark (see screenshot)the file are accessible but still I am concerned that something could be wrong.Any suggestions?angelo bosoni 

Pretty simple.  Lightroom hasn't been saving my xmp files, even though box is checked.  I import cr2 files, edit them and archive them.  I have way too many files to keep them in the catalog, they have to be archived.  It's basically wiping out all my edits.  Please don't ask me questions, just solutions please.

Hello everyone. Last year Imagen and Neurapix have announced their AI plugins for lightroom using AI. As i read these softwares learn how you edit a photo and then apply ai profiles to next images.But they do not learn from remove tool.I shoot product photography. These products have enough <<spots>> to their surface (oil spots, scratches, etc) that i need to remove during edit.So, i am searching for a software that can learn from my edits, during of remove tool usage, and then apply these edits to similar products with different sizes.Do you know if there is such a software?Thank you.

When you're running LR on a network that has a high network latency to Google's map servers, the Map module can display a map that's all grey. Such latencies could arise with slow satellite links and/or with ISPs that have slow paths to Google's servers. This behavior likely accounts for the recent spate of German, French, and Chilean users seeing an all-grey Map.   This misbehavior can be reproduced consistently on LR 14.2 / Mac OS 15.3.2 using Apple's Network Link Conditioner, which adds latencies to your computer's current network connection. Recipe:   1. Install Apple's Network Link Conditioner: a. If Xcode is not already installed, install it from the App Store. b. Download "Additional Tools For Xcode 16.3": https://developer.apple.com/download/all/ c. Double-click the downloaded .dmg to open it. d. In the Hardware folder, double click "Network Link Conditioner.prefPane" to install it as a pane in System Settings.   2. In System Settings > Network Link Conditione

Export von RAW Fotos in jpg 100% funktioniert nach update nicht

Hi.  Does anybody know how to print edge-of-the-page crop marks using the print module?  I want to print an image that will end up 11x14 is size (with a thin border) , but I have to print it on a 13x19 page.  I hope to have 11x14 crop marks printed so I can easily trim the paper.  Thanks for any help offered.

BonjourLightroom classic version 5.7 considère le catalogue comme non-valide et refuse de l'ouvrir. Pas moyen de le réparer. Je ne sais comment faire. Merci pour votre aideClaire

Assez souvent, notamment lorsque je me sers des masque avec ligthroom classic,  il y a un blocage du pointeur de la souris et bien sur de l'ensemble de ligthroom classic. Cela ne le fait pas à chaque fois, mais si je traite trois ou quatre photos, il y a toujours un moment où cela le fait. J'ai essayé plusieurs fois d'e désinstaller et réinstaller litghroom, mais rien n'y fait. au bout d'un moment ligthroom redémarre mais il plante peu de temps après Merci d'avance pour votre aide

MAC OS 10Lightroom 2015.4 releaseSteps taken: Open develop, click on crop, unlock padlock, select ratio of 2x3 (then padlock automatically closes), drag / move crop area - then ratio switches straight back to "Original".   Printing photos at the "Original" ration leads to unwanted cropping of the prints.How can I set the default ratio for all of my prints to be 2x3? If that is not possible, how to I lock it on each one?[Moved from the Forum comments forum (which is for issues with these forums themselves) and into a product-specific support forum - moderator]

can we please come up with an alternative setting adjustment other than sliders? sliders I go back-and-forth over the exact setting I want back-and-forth back-and-forth back-and-forth 1000 times if I could just hit the up and down key to put a numeric value in I could precisely do what I wanna do in a fraction of the time sliders are not precise and stupid I'm going back-and-forth trying to set it to zero or zoom into 100% and I'm at 98.9 102.5 I want 100 why can't this thing figure out the number I wanna go to if I could type it in but no. when you click the slider it doesn't highlight the number box you have to go there and do that separately when you click the slider the number box should be highlighted and when I type it should type in the number and when I touch the arrow keys it should've just only that slider.  who wants to switch between pictures when you're in the develop mode what the duck!(I guess this is geared towards kindergarten children.)  I don't even underst

I have been trying to select 3 different images to create a hdr merged image but after selecting the three images with varying exposure levels, and selecting hdr, I keep recieving this message. How can I bypass this error? Thank you!!

Hallo, Ich habe meine LR6 Lizenz vergessen zu deaktivieren und möchte es nun auf den neuen PC installieren, dann kommt jedoch der Fehler, dass die Seriennummer zu oft verwendet wurde.    Adobe Support sagte mir, dass hier die Experten helfen können.    Vielen Dank.    [moved from bugs to discussions according to the community rules - Mod.]

Steps to reproduce:Mac OS   1. Settings > Appearance > Show scroll bars : Always 2. Run this code in a script OR in a Plug-in  -- Import required Lightroom modules local LrDialogs = import 'LrDialogs' local LrView = import 'LrView' local LrBinding = import 'LrBinding' local LrTasks = import 'LrTasks' -- Function to show a simple combo box dialog inside an async task local function showSimpleComboBoxAsync() LrTasks.startAsyncTask(function() local Ui = LrView.osFactory() -- Create simple property table (no context) local props = { selectedValue = "1" -- Default value } -- List of numbers 1 to 10 for the combo box local numberOptions = {} for i = 1, 10 do table.insert(numberOptions, tostring(i)) end -- Build UI: label + combo box local dialog = Ui:view({ bind_to_object = props, Ui:row { Ui:static_text {

Lightroom will no longer open. I don't recall having to force it to shut down or anything that I saw on other message threads about this issue. I have restarted and completely shut down my computer, uninstalled LC and just now uninstalled ALL Adobe Creative Cloud programs, made sure all the files were deleted, reinstalled, done the preferences reset thing... and still nothing. This is very frustrating. 

Does the latest version of Lightroom provide the option to view on screen which camera focus point was used?  I use Canon bodies if that matters.  Thanks.  

I am using LightRoom classic on iMac and my catlog sizeis 114GB. I set option AUtomatically Discard 1:1 Previews after 30 days. But still catlog size is not decresing.