Lightroom Classic

Hi,  I'm a photographer, I'm using Lightroom tethering on my iMac but I'd need a laptop also.My goal is not to edit on Lightroom but just to receive the files while shooting.I have the opportunity to buy a MacBook Air 13” 2017 /8GB RAM/Intel i5/128GB SSD, do you think that this beast would be working good for my need? Not to slow or some others problems?Thank you very much.

Hallo,ich hatte im Dezember einen Festplattencrash, der dazu geführt hat, dass die Daten der externen Festplatte recovered werden mussten. Dies war erfolgreich. Ich erhielt eine Festplatte, die exakt der defekten entsprach. So konnte ich die Lightroom Daten wieder verknüpfen und nutzen.Ich stellte nun fest, das min. zwei Drittel meiner Fotos (Fotos älter ca. 1,5 Jahre, neuere Fotos sind nicht betroffen) im unteren Filmstreifen in Lightroom oben rechts ein Ausrufezeichen enthalten: Klickt man das Ausrufezeichen an, öffnet sich folgendes Fenster:Egal, ob ich die Einstellungen überschreibe oder mit der zweiten Option die Einstellungen des Datenträgers importiere, erhalte ich den gleichen Effekt. Bearbeitete Fotos verlieren ihren Inhalte. Das heißt, alle Bearbeitungsschritte werden gelöscht und das Bild wird im RAW unbearbeitet angezeigt. Mit dem Ausrufezeichen werden sie bearbeitet angezeigt. Ich kann alle Bearbeitungsschritte sehen.Ob das wirklich etwas mit dem Festplattencrash zu t

Bonjour . Je viens d'installer LRC sur Mac Mini depuis trés peu de temps et l'appli m'indique l'impossibilité de réduire le bruit de mes photos par l'IA pour une raison indéterminée ...Merci pour vos réponses . Attention ... Je suis débutant !

My Canon captures photos as RAW+JPG.I would like to know whether it is possible to export the original JPG as captured by the camera. Referred to as "Embedded Preview" in Lightroom.I already know how to export RAW files processed into JPG. But I do not always have the time to develop them, and trust my camera.

Hi,When updating to a new version of Lightroom, my previous catalogs were backed up. However, in the new version, only 18 out of 2500 images are showing. I don’t know how to solve this issue, and I have countless hours of work stored in the old catalog. Do I need to install a previous version, or is there a way to fix this in the new one? I would be very grateful for your help.Best regards,Emin Ekström

I'm going through my photos and labeling the faces in them in Lightroom Classic 14.2 release on Windows 11, and the Draw Face Region tool won't keep the face rectangles that I draw. I drag a rectangle out, then it disappears when I release the mouse button. Is this a known bug? Does anybody know a fix or why this may be happening?   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules.]

OK, so a little clarification upfront before i get to my actual questions. I use LRC and LR across a few devices. My desire is to have full copies both on the cloud (using LR) and a local library (using LRC).My Import process looks like the following:Import from SD Card to LR (cloud)Originals are downloaded from Adobe CC to the local machine via LRCAfter the originals are downloaded by LRC to the designated local folder, I move them into another folder using the following naming structureYYYY-MM-DD - DescriptionAfter moving the photos into the descriptive local folder, I create a collection by right-clicking the folder and selecting "create collection". I select "Sync with Lightroom" to create the same collection (album) on LR The steps above result in an original copy on Adobe CC as well as an original copy on my local machine. This also maintains the linkage between both LR and LRC syncing all changes wherever they are made. My questions: When I create a coll

Hi all,   I am using LRC 14.2 - after opening it takes ~1-2 minutes until LrC crashs without any error message or Log to be send to adobe.   What I tried so far: Updates for NVIDIA, Windows, C++ Redistributable and Adobe all done to latest version Restore the LR preferences to the default settings (still crashs) Switch off the GPU support (still crashs) Checked for an errant lock file (still crashs) delete the preview cache => Here the crash also occured but the first time Adobe Creative Diagnostics popped up and has send a error report to Adobe. The Diagnostics tool did not find any error afterwards though   The Log report should be send to Adobe. I will attach the Version info below and also the lrc_console.log and Windows Event Log for Lightroom ------------ 1) lrc_console.log   Lightroom Console Thu Feb 20 22:42:09 2025 L: Abnormal shutdown of previous session: acbbed36-9484-4aa9-9f5c-008cc3c5f725L: Last known memory usage from previous session: 14120.3 MB

on my mac I'm having this bug 'Tourbox needs acces to TCP ports, but failed to make a connection' and my tourbox input device doesn't work anymore. What could it be? It's not tourbox related because it's working fine outside of lightroom, and I also get the error 'Loupedeck needs acces to TCP ports, but failed to make a connection'.

Ich Habe eine Nikon  D 750 mit dem Nikon GPS Adapter. Die GPS Dateien werden von Lightroom nicht gelesen. Auch das nachträgliche Metadaten lesen und kopieren hilft nicht. Was ist zu tun ? Mache ich schon etwas beim Import falsch?

After several days of searching, I discovered Creative Cloud caused my computer to come almost to a complete stop.  I was finally able to remove all apps attached to CC and CC itself, and now my computer is back to normal. Is there some way to run LRC without the crappy Creative Cloud?

I'm a fan of the new backup management tool in LrC v14.2. However, I'd really like for the interface to be a bit clearer/more useful in terms of showing when the backups were made. Above all, I think there should be a simple backup date column. That seems like the most important detail to me. That said—even if path is an important focus for a given user, you should be able to see the full path in the list without having to hover momentarily over each item. You should be able to expand the column and have a horizontal scroll, rather than having to hover over each one. I suspect(?) that most people using this tool are backing up to the same place each time. I suspect most of us just want to be able to manage/delete unneeded backups. Truncated paths are incredibly unhelpful for this, ordered or no. So—either I'm missing something, or this is a feature request for better UI on this feature. I'm already a fan, please make it better!  

I am using Lr Classic v 14.2. on a Mac running Sequoia 15.3.1.  I am editing a Leica M11 DNG file. When I select the Guided Upright icon in the top left of the Transform panel, four guides automatically appear along each side of the image (top, bottom, left, and right). I am not presented with the ability to place the crosshairs on the image and create my own guide before these four are created. When I do try to place a guide, I receive a message that only four guides are allowed.   This does not occur with Sony files converted to DNG. The tool works correctly on those files.   [Moved from ‘Bugs’ to ‘Discussions’ by moderator, according to forum rules.]

Hi I am using Lightroom 6 on a Mac OS 10.9.5. I am trying to delete a folder by highlighting the folder and clicking on the minus symbol directly above. A dialog box appears saying Remove the folder xxxxxx 100 photos etc. If you continue, these photos will be removed from the Lightroom catalog but the folder and files will remain on disk.I want the photos, folder and everything completely removed from Lightroom and totally deleted. I do not want the folder and files to remain on the disk. I have no need for these photos so I do not want them to take up space on my disk. Not sure why Lightroom does not give you that optionNot sure why Lightroom does not give you that option. Thanks for your help.

Hello my friendsI have Intel 17-14700kf, AMD RX 7800-XT, 64GB DDR5, but Lightroom is so slow, I tried everything but nothing is working, when I try to add a mask it takes about 10sec to get ready, I have the latest windows update + latest lightroom update + driver + etc.can anyone help me please?

macOS Catalina 10.15.7Lightroom Classic 10.1.1Camera Raw 13.1Fujifilm GFX 50s Hello.  Whenever I do a tethered shoot, I am able to establish a connection.  (Taking a photo on the camera automatically appears in Lightroom as intended.)  However, the Tethered Capture Window is nowhere to be found.  I've tried clicking "Show Tether Capture Window" and "Hide Tether Capture Window" - as well as the keyboard shortcut - but the tether window is nowhere to be found.  I've double checked to make sure its not nowhere on the edges of the screen, and have tried resetting the preferences in Lightroom.

  THe above two images show the difference in the export. the Left is my edit and the Right is the image that was exported.i am editing in Adobe RGB and exporting to sRGB. the settings i have tried are, with LR version 8.4.1, 8.4.0, 8.3.0 . i have viewed the image in the native windows 10 viewer, google drive viewer, and iphone image viewer. i have never had this happen to my exports before, nor have i had an issue with colours. the image above is a screen grab which shows that it is not the result of my vision on the screen or the calibration of the screen. this is the output raw from the machine. EDIT:Ive added more information via screen shots. the far left images are from a proper image viewer that sees the colour calibration, the middle is windows viewer, and the right is lightroom. you can still see a difference between each image.

I recently upgraded my 2021 MacBook Pro M1 Pro (10-core CPU, 16-core GPU, 16GB RAM, and 1TB SSD) to a 2023 MacBook Pro M2 Max (12-core CPU, 30-core GPU, 32GB RAM, and 1TB SSD). The MacBook Pro 16-inch was a significant improvement over my 2016 model and handled my R5 files with ease. However, as my editing demands grew, I began experiencing more frequent slowdowns.  I decided to move to a brand new 14-inch MacBook Pro M2 Max for its portability and expected performance boost for my workflow (So I thought). After migrating my files and selling the 16-inch model, I was excited about the upgrade. However, I have noticed that even on this newer machine, I sometimes encounter jerky performance, leading to increased fan noise and heat buildup, which is frustrating. While many praise the MacBook Pro M2 Max for its fast file importing and exporting capabilities, few discuss or measure its performance during high-volume editing sessions.  I have the latest Lightroom Classic installed

I use a lot of custom print profiles in my workflow.  I just noticed that the Profile settings in the Print Module have now reverted to "Managed By Printer" in every one of my custom profiles.  The ICC profiles are still there, and the media format settings haven't changed in the Print Properties dialog.  Only the saved ICC setting in the Print module itself has changed.  Relatedly, all of the ICC profiles have also gone missing from the drop down color management setting menu in the Print module, which typically saves the last 10 or so profiles used.  Again, the ICC profiles are still installed and recognized by LR; it has just forgotten which ones to apply to which print profile, and tells them all to be managed by the printer (Canon Pro-1000). It is easy enough to change the color management setting before printing (if I remember to look!) and then update the profile with current settings, but with dozens of custom profiles that is a major PIA.&nbs

One question for the SDK veterans or the team.In one of my codes I want to append a unicode character, I use it in "MaskName"U+26A1 High VoltageIn General are unicode characters safe or best to avoid them?.

Lightroom classic ne peut pas importerun fichier jpg de 30000 pixels de long et 120 Mo alors qu'il indique une limite de 65000 pixels et 590 Mo. Est-ce que cette limite ne s'applique qu'aux fichiers raw ?

I updated my LRC to 14.2 today.When I open LRC it immediately  gets stuck in "not responding" mode.I tried also to use a back up catalog, but unfortunately with the same result.I have forced app shut down and rebooted my PC.I have loaded the latest GPU driver and OS.OS: Win11 24H2GPU: Nvidia GeForce GTx 1080Ti  Studio ver. 572.60RAM 32GbAnyone else had same problem? Any help would be highly appreciatedBR Ritu

Hello, I have updated Lightroom to version 14.2 where you say that it already supports the Sony a6400 when tethering. But when connecting LR it says that this firmware is not supported, even though it is the latest version 2.0.macOS Sequoia 15.3.1LR 14.2

In Lightroom Classic , the syncing of images to the cloud has stopped due to some corrupted images. How can I identify the corrupted images, and secondly, how can I then delete them so syncing can continue? 

When using the remove tool, it auto selects the option "heal" verses "remove" which I would love for lightroom to give me the option to have it auto select the last used tool instead of having to keep going into the drop down "Fill:" tab each time I want to use "remove". Remove does a way better job verses using the auto selected "heal" option.