Photoshop (Beta)

Al cambiar tamaño de la imagen, concretamente de 1000 X 667 píxeles, sale mal, como con puntos brillantes

The center alignment tool in PS beta has been broken for some time now.

If I open an image in PS Beta I can adjust settings like denoise exposure etc, open the image, crop it, fit view on screen & save as a JPEG. If I then open another image, when I get to crop it I can't select anything on the command toolbar. As in no commands!If I shut PS down and then re-open it, everything works as normal.I've tried resetting the crop tool and the general preferences without success.The only thing is to close it and reopen it after each picture - which is a PITA.It seems that it becomes an issue after updates - the current one is v26.5. Sometimes it settles down after a while - and then reappears.ANy ideas?

beta 26.3.0 Sonoma 14.7.2 Processor 3.6 GHz 8-Core Intel Core i9 Graphics Radeon Pro 580X 8 GB Memory 64 GB 2400 MHz DDR4   At least a half-dozen times over the past ten days, while working on extensive masking, Photoshop Beta freezes with a red frame around the window. Usually the beach ball spins, and I have waited for up to 3 days for the program to unfreeze. Once I let it spin over the weekend, but upon returning on Monday, it was still spinning and frozen. There does not seem to be any rhyme or reason. No sequence of events causing it, no error message, no "scratch disk error" message, no message at all. No recoverable files are found or opened when the system is reset and the program relaunched. It's happened often enough - and lost me hours of time - that I am no longer comfortable using the beta version. A screen shot of how the Photoshop Beta desktop looks when it's frozen is attached.

Hi, I converted a polygon into a frame, and successfully arranged a photo inside of it. After saving the project and closing the program, I opened the saved project today and the image is no longer showing on the canvas, but it shows in the thumbnail in the layers panel and I'm able to edit contents and see the image that should be there. When I hover over the layer in the layers panel, it shows an outline outside of the canvas - as shown in the attached screenshot, but even when moving this outline back into the work area, no image is seen. The frame is the top layer in the project. The photo of the city should be covered by an image of a magazine, and even when hiding the layer with the city photo, the image in the frame is nowhere to be seen. I'm using Photoshop Beta 26.4.0 and I'm on a Macbook Pro running macOS Sonoma 14.7. I've tried opening the file in Photoshop 26.3 as well, with the same result.

A parametric filter to create various Wood Grains and Metal Surfaces would be great.

Hello everyone,  I'm currently experiencing on a macbook air and mac mini an issue with the Selection Brush Tool and I don't know how to sort it out. It may be because I've pressed the wrong buttons, but I don't know how to make it work, as it should. Here is the issue: https://www.loom.com/share/736a0288230d47d7b38da3edb9db09e3 Normally it should continue selection, however at each click, it inverts selection. How do I make it so when I click it continues the selection?

Beta 26.4 (updated today) and the previous version. Windows 10Opening a saved .TIF file in Beta brings up a drastically corrupted file. In this example you can see the file opened in Photoshop on the top and in PS Beta on the bottom.  I was hoping that the latest update would have changed this, but it has not.  This happens for all .TIF files, not just this example. I dare not save the file before exiting, for obvious reasons. It will open again in PS without problem. 

Okay, so I have had this issue multiple times, and I'm not sure there's a fix unless the bug is resolved. The task bar with " file, edit, etc." gets stuck, and you cannot access it. 

Photoshop Beta - 26.4.0Mac When I copy this:It pastes like this:I have the fonts installed. It's just a basic Acumin Variable Concept This has been happening a lot lately. I did update today.

Hola. Porque al abrir una foto en Photoshop como filtro de Camera Raw algunas de las funciones de Camera Raw no aparecen como por ejemplo la mayoria de los Perfiles, solo aparece el de Color y el de B/N.Es un problema de configuracion ?????Si abro la foto desde el explorador eligiendo Photoshop la abre primero en Camera Raw  y ahi si que aparecen todos los prefiles.Saludos

Hello,Ik heb een probleem met Photoshop en ook in Bèta. Als ik een foto bewerkt heb en opgeslagen en ik wil daarna weer een foto openen en bewerken, eerst in RAW en daarna in Photoshop of in Bèta dan krijg ik de melding dat er een fout is opgetreden en kan dan géén foto's meer openen en bewerken. Dit lukt wel als ik mijn pc afsluit en opnieuw opstart, maar dan kan ik weer 1 foto openen en bij de tweede foto krijg ik weer de melding dat, er een fout is opgetreden. Bij de foutmelding krijg ik ook geen foutmeldingscode.Beide programma's zijn tot en met de laatste update bijgewerkt.Ik hoop dat u mij kunt aangeven hoe ik dit probleem kan oplossen.Vriendelijke groet, Ina SchoorlIna Schoorl

The hand tool doesn't work. I cannot move to left or right, if my mouse doesn't have the scroll left-right function.

Guys, this is a joke, and it's not funny.You force users to install latest updates by displaying unremovable banners on GUI and then you serve us a hot pile of "removed language by admin"Pointless to list all bugs I have encountered within 10 minutes after lounching the updated versions... I respect my time and suggest to pass this message to your quality check dept. At the end of day I can understand that some 'dev' made these jokes versions. But I have no mercy for those in your quality check team who actually let it to be wrapped up and released as an update.... this is a joke.

I thought it worked pretty nice for a good while, but recently this is what I get ~90% of the time trying to generate something (there is a lot of skin present in my imgs, but nothing that wouldn't be covered by an extremely conservative swim suit). Occasionally if I just try the same thing over and over enough times, I get some results, but 90% of time recently I just get this when I try to use Generative fill:Whether prompt is blank or "." doesn't seem to make much difference nowadays.Super frustrating. I've used the "Provide feedback" a number of times but naturally getting tired. Please do something. 

Several times now when opening Photoshop Beta I get 'End of life' meassge and then all of the previously iopened image are completely gone in the home page. Is this an issue with the Beta Version or what?

Hello, since the last two updates, there has been a bug with the Gradient Map adjustment layer. Issue Verification Process:1.We have any layer.2.Right above it, we create a Gradient Map adjustment layer.3.We set it as a clipping mask.4.At this point, if we select the clipping mask, the tool displays correctly. The handles appear on the image, allowing us to move them.5.We create a new layer (regardless of its type).6.We place it just below the Gradient Map adjustment layer.7.If we go back to the Gradient Map adjustment layer, the gradient handles no longer appear on the image. In summary: Whenever there is a Gradient Map layer used as a clipping mask and another clipping mask layer is placed directly beneath it, the gradient manipulation handles disappear. However, if the new clipping mask layers are placed above the Gradient Map layer, there is no issue.

Issue: Gradient tool consistently produces "Could not complete your request because of a program error" when attempting to use on layer masks. Photoshop Version: 26.2.0OS: macOS Sequoia 15.1.1 (Mac Studio M1 Ultra) Steps to Reproduce:Create or open a document with an existing layer maskSelect the gradient toolAttempt to apply gradient to the layer mask Expected Result: Gradient should apply smoothly to the layer mask Actual Result: System displays error message: "Could not complete your request because of a program error" Additional Notes:Error occurs on multiple (all unrelated) filesError persists after application restart and system rebootIssue is consistently reproducible

The app crashed multiple times when using the undo command.

where do I get Adobe Photoshop Beta version 25.13. while the new version of Adobe Photoshop Beta is not compatible, with my very simple computer, please help me   

I cannot get the embroidery filter to work in Beta PS.  The "actions" take place but not embroidery textures seen.  What is wrong in my set up?  Thanks in advance for any guidance. 

Hi,I'm getting the following error message when using the Photoshop 26.4.0 Generative fill toolWe've encountered an issue and can't complete your request at this time.The App is updated to the latest version, the firewall is not blocking it, I've already uninstalled and installed.Can you help me to fix it?

Hi, I keep getting an error message when try to use Generative Fill "We've encountered an issue and can't complete your request at this time. Thank you for your patience. Please try again later."   I've checked updates and it all looks good my end, I'm using a Macbook Pro 2021. This has been happening for the last couple of weeks.    Thanks.   

Greetings all. Im a long time user - but first time posting so forgive any protocol i might miss. I am having what I think is an issue I cannot resolve.  I am not quite sure how to explain it but here goes.  It doesn't matter what brush I choose or what size I choose or how I set ANY of the settings... I have been through everything on every brush trying to figure it out. Even used chatGPT and several other AI's to try and fix my issue. I am on 2019 Macbook Pro. Using Photoshop and Photoshop Beta (always up to date) and this issue exists in Photoshop 2025 and in Photoshop Beta. It is messing with my head!In short I will use the example of the brush tool to paint white on top of a black background with setting to 100% hardness.  When I move my brush over the black background I obviously see the size 60 circle of my brush that I chose.  So I expect that when I click and start brushing... the size of the brush circle I see will be the size of what I brush. It neve

When you open Camera Raw and cancel, the Camera Raw Filter settings previously saved are cleared. Result, when you reapply Camera Raw Filter, nothing happens. Why anyone would want to apply no settings makes no sense, but there may be deep Adobe logic behind it (happy to be enlightened). I would, therefore, class the behaiour as a bug as it's an unexpected behaviour. Example: Open image in Camera Raw Filter.Apply a preset, or settings.Open another image.Select Filter > Camera Raw Filter.Repeat as many times on as many images you like (works great). Now, say you want to experiment with Camera Raw settings, or you want to apply different settings or preset to an image so you:Open image in Camera Raw Filter.Apply settings, or a preset.Don't like it.Cancel. Keep working on same image, or open another and choose Filter > Camera Raw Filter.Result: Camera Raw Filter settings not applied (expected). In fact, you don't even have to do anything in Camera Raw, just