Premiere (Beta)

se daña el archivo nose porqueOpen for Voting

llevaba ya 5 ascenas de una video largo y me dejo sin los archivos abiertos en after efects beta tambien 

570

Jill23798454v3bdParticipant

premiere crashes when expanding the timeline

750

BronquesInspiring

Can't edit captions using pencil iconOpen for Voting

Hi, every time I click on the pencil icon to edit caption text, it exits edit-mode after I type 1 character.  I would hope to click on pencil icon, edit my text, and then click off when I'm done Anyone else experiencing this issue? Premiere 24.1Mac Venture 13.5.2

1542

Sam248492215x0nParticipant

RED Footage causing crash in new BetaOpen for Voting

When I try to playback RED footage (.r3d clips) the player will stop playing (won't play back). It won't crash, but the timeline won't play back anything. Sometimes exports are pausing around the spot the RED footage exists and just won't continue (says 2 mins, but won't progress). Something's going on with RED footage in the Beta -- works fine in earlier versions of PP. Anyone else have this problem or can test out varieties of RED footage in their timelines? Might it have something to do with reframing the size (6k down to 1080p in 1080 timeline)? 

710

Henry22103636wl6vParticipant

I report this bug

Link to the problem here: https://community.adobe.com/t5/premiere-pro-bugs/reporting-software-bug-premiere-pro-22-5-windows/idi-p/13877385   I can provide evidence if you contact me at the following email: [moderator removed personal information]

820

Fotomac360Participant

Audio disk I/O Overload and Missing Audio messages

Currently editing a VLOG using Beta and having some issues with the audio. Mac, full spec. While scrubbing/PLAYING through footage, every few seconds the 'Audio disk I/O overloaded' error pops up. The audio will cut out for a second. I start to scrub again; it'll work for a bit, and then the same thing happens. Also when playing footage audio will abruptly cut with an error saying ''audio from clip not found'' with the waveform clearly showing in the timeline. Footage is from a GoPro Hero7 and when played there is NO audio missing.There may be a problem for the ai system as teh audio is recorded next to a waterfall. 

3440

Cristian Cami32513887s2dlParticipant

Edición de texto en subtitulosOpen for Voting

No me deja editar luego de crear los subtitulos en el panel de texto>subtitulos

1351

marekl6907861Participant

Captions now workingOpen for Voting

Hello there,  i am struggling with creating captions, once write down/paste text with corect timing and create following one, the first one text will dissapear! Its also doesnt work after importin whole .srt file. Iam allowed to edit one character in caption and then Premiere close editing option.  

1891

AkashSinghParticipant

transcriptionOpen for Voting

I am facing an issue, when I convert the transcription in caption, and try to edit the caption it takes me out from the edit mode after pressing any key. to edit complete have to reenter everytime

2341

Isac da SilvaParticipant

Premiere Pro Beta - Error in new Sequence

Hey guys,so i've been testing the PP Beta and it works pretty good. Besides some little bugs i could not identify sth, that would make me go back to the old Version. The new features (e.g. enhance Speech etc...) make it very appealing for a guy like me.But i've come to an error, that i cannot find any solution for it:- I've got a project where i edited in a 4k 16:9 sequence a video for a client- After editing the video in 16:9 i needed to make social media content so i created a new sequence 4x5 and just copied the video/edits from the other's sequence timeline and pasted into the new one- on the first day i removed the zoom effects and made them again for the 4x5 format etc... and everything workedTHE PROBLEM: Since yesterday everytime i load the sequence after scrolling thorught the frames it gets stuck on the frames and i cannot play anything in the timeline. I can move the cursor and the frames, but the timeline gets stuck and i'm not able to see any video, since it is stuck in one

1682

giraffiskParticipant

Suddenly cannot load After Effects sequenceOpen for Voting

The AE sequence that I had linked in my project won't load anymore - after converting the project to the Premiere Pro beta version. I have tried to convert the AE to the AE beta version as well, but that also is not working. 

670

祐

祐二32505042n797Participant

Steps to reproduce: 1. ... Result: ... Expected: ... System info Application: Premiere POpen for Voting

Steps to reproduce:    1. ... Result: ...Expected: ... System info    Application: Premiere Pro (Beta) v24.1.0.27    OS: macOS v13.6.0, RAM: 96.00 GB GB, CPUs (logical): 12 Text editing may later be undone

740

祐

pixellingoCommunity Expert

Small Issue Editing CaptionsOpen for Voting

I ran into an odd little issue while editing subtitles in the Captions panel. Before generating captions from the transcription was not a problem - no issues. But, once I generated captions and needed to make further edits, it would not let me double-click to edit.   By the way, I LOVE the AI audio enhancements (from Adobe Podcast) baked into the pie.

2721

LeonardoPragaKnown Participant

edit captions

Hello, I cannot edit captions?

2921

Dāvids28185533pbyyParticipant

Crashing when I try to switch between workspacesOpen for Voting

It crashes whenever I try to switch between workspaces. I tried few of them and it always crashes!

1081

BrianWilburParticipant

warp stabilize with multicam and lumetri effects

I have found that warp stabilize works much better when a multi-cam clip is flattened.  This copies over any underlying lumetri settings ok, but does not allow for any subsequent lumetri color changes to the underlying footage.  If I update the color settings on the source footage, then I have to manually go and update the lumetri settings on any sequence that has been flattened for warp stabilization purposes.  I'm open to suggestions for a better work flow.  Including possibly:Having an option for a lumetri setting, when updated, that could also update all the other clips with the same preset on them.Fixing the warp stablize so that there is no need to flatten the clip.Having a search and replace effects function to do a mass update on any lumetri settings that need updating.

2241

in5FAEParticipant

Auto transcribe in the correct language

In the beta App, i can't select the language to transcribe and when I do static transcribe, I can't edit it. In the normal version, this doesn't happen. Please update this for other languages.

8313

in5FAEParticipant

Multicam sequence with no audio waveform

After creating the multicam sequence, when importing to the timeline the waveforms disappear. Before I used to just render and replace but now I can't seem to do that.

1573

RAJESH30330694mss8Participant

Adobe premiere pro beta audio enhance

Hi,adobe premiere pro beta now released audio enhancing features but it will not works with native languages.. is there any solution for that? 

2992

danield25437812Inspiring

Audio Enhancements not Present in ExportOpen for Voting

  Steps to reproduce:1. I applied the enhancement (enhance speech) to all my VO and exported it and the export doesn't have the effects applied. System info    Application: Premiere Pro (Beta) v24.1.0.27    OS: Windows v10.0.22631, RAM: 31.75 GB GB, CPUs (logical): 32

2270

Myles0D4CKnown Participant

Project not opening (stuck on loading)Open for Voting

I'm working on the Adobe Premiere (Beta) and it was working fine yesterday, but when I turned on my comoputer this morning and tried to open the project, it stops loading it at about 3/4 of the way and just freezes. I also updated the application to the newest version and I am still having this issue. I also tried opening an auto-save version of that same project and same issue. The application is only opening when I start a new project entirely.

4634

Reginaldo24025843gj8tParticipant

INSTALEI O PREMIERE BETA E TODA HORA ELE FAZ RENDERIZAÇAO

INSTALEI O PREMIERE BETA E TODA HORA ELE FAZ RENDERIZAÇAO, COMO RESOLVER  

800

Mario257975188d6rParticipant

dynamic link server connection

When there is is missing files I go link them When I'm linking them I search for it once Im in the folder areaThe dynamic server connection is not connecting it just loadshttps://share.vidyard.com/watch/iVppC3J1ogjfaF7u8gzkLd?

1000

Zach_ChParticipant

Sync settings not working in Premiere Pro Beta (24.1.0)Open for Voting

Sync settings from current release of PP (23.6.0) to the PP Beta (24.1.0.27) is not working for me. I've uploaded the settings with sync settings from PP 23.6 several times, and used sync settings to download from the cloud on PP Beta several times. The settings (window layouts, keyboard shortcuts) never appear on PP Beta. I uninstalled, deleted all files and reinstalled PP Beta, and it still does not work. I waited overnight hoping they would magically appear, and that didn't work, either! Unfortunately, I already began editing a huge timeline in PP Beta to take advantage of the text-based editing and AI dialogue audio sweetening features, but having to struggle with this bug, and I guess rebuild all my keyboard shortcuts is negating any time savings I gained.System info    Application: Premiere Pro (Beta) v24.1.0.27    OS: macOS v13.5.2, RAM: 32.00 GB GB, CPUs (logical): 10

4831

Ros32302038uiggParticipant

Enhance Speech bug (Beta version)Open for Voting

Premiere beta 24.1 feedback:Speech enhance is not working properly due to:- during playback, if the mix is set at 7.0 there is an echo effect (improves when i set mix to 10.0)- during export, it does not export the enhance version (it sounds exactly like the original)I've attached the speech enhance sample for:- web speech enhance- premiere beta speech enhance export (that sounds like original)- originalFYI,Hope this is the right place to report on bugs for beta.

5712