Premiere (Beta)

O painel da ferramenta de transcrição não abre as opções de exportação no botão "..." 

It doesn't work, the image doesn't disappear inside the outline, not outside. Normal crop works. The mask is tracked, but it does not remove the selected contour.

Premiere Pro doesn't send a PF_Event_MOUSE_EXITED event, or one last sequence of PF_Event_ADJUST_CURSOR and PF_Event_DRAW events, when the mouse cursor exists a custom parameter’s UI in the inspector (ECW).  This problem makes it impossible for third-party plug-ins to implement "mouse hovering" effects, such a highlighting a button’s frame and title only while the mouse sits above the control – similarly to how Premiere Pro’s own native controls work. A third-party plugin crucially needs either a PF_Event_MOUSE_EXITED event (during which it can set out_flags->PF_OutFlag_REFRESH_UI and evt_out_flags->PF_EO_ALWAYS_UPDATE flags) or one more round of PF_Event_ADJUST_CURSOR and PF_Event_DRAW events to have a chance to redraw its custom controls without any effects or elements that are supposed to be visible only while the mouse cursor is within its section of the inspector (ECW). Because plugins are not given a chance to redr

I am getting constant "audio and video clock out of sync" warnings when prior to today I did not get these issues. I have sewarched through forums but have seen no solution that has wortked for me. Worth noting: this only happens and it a little glitchy when I hit play, then moments later it evens out and plays just fine. SETUP2023 Razer Blade 15Adobe Premiere Pro Beta (latest version)Processor 12th Gen Intel(R) Core(TM) i7-12800H 2.40 GHzInstalled RAM 16.0 GB (15.7 GB usable)3080ti GUP (just updated)System type 64-bit operating system, x64-based processorEdition Windows 11 HomeVersion 23H2Installed on ‎11/‎24/‎2022OS build 22631.3958Experience Windows Feature Experience Pack 1000.22700.1026.0Audio input set NO INPUT in preferencesSequence set to 48000Hz CAM INFOArri Mini + BMPCC6k @ ProRes 422, 48000HzAudio recording @ 48000Hz\  

Hi, I am using Premier Pro (Beta) and I keep getting an error message saying audio and video clock out of sync. 

Estimados, tengo este error en la version Beta 24.5.0 build 44Probé cambiando algunas configuraciones en ¨audio¨ y no logro una solución. Tengo seteada la latencia en 30ms, probé 40ms y fue peor. Adjunto pict con la configuración.Mi placa de sonido es una Focusrite Scarlett solo con MME. utilizando ASIO con una BM Intensity pro 4k y tengo el mismo problema.Alguna sugerencia???Muchas gracias. Saludos

The PF_AppGetColor() in PFAppSuite has never worked reliably in either After Effects and Premiere Pro, but this is more so of an issue now, with the introduction of Light / Dark / Darkest modes. Here are the main issues with PF_AppGetColor & the SDK in general, when it comes to custom UI: - The various constants in the header aren't documented, and while on first examination they are self-documenting, this isn't the case. For example, you might think that if your custom UI draws a button, it should use the color associated with PF_App_Color_BUTTON_FRAME for its border. But what happens if the button needs to be drawn disabled? There is no PF_App_Color_BUTTON_FRAME_DISABLED. But there is a PF_App_Color_FRAME_DISABLED. Is that what you’re supposed to use? - No indication in the SDK as to the color space in which colors are returned. Are these sRGB? Or perhaps the color space of the main screen? What if the user has multiple screens with different color s

On recent betas that feature the new Darkest / Dark / Light Appearance modes, the API available to third-party plug-ins to determine the background color of the inspector is no longer working. It appears to be retuning black, on all three settings. The PFAppSuite4 PF_AppGetBgColor function is returning the RGB values 0,0,0 instead of the actual background color of the window. This regression breaks any plugins that rely on that API to know what color to fill custom UI in. For example, here is the custom UI of a plugin in the release version of Premiere Pro: This is how the same UI looks in the latest beta, where the API is returning solid black: ...the problem is unaffected by the current Appearance setting. Here is the same UI drawn in Light mode on the latest beta:  

I am posting this both as a heads up and as an open invitation to other developers (and Adobe) to file feedback against the most recent version of Xcode. As of Xcode 16 beta 4 (16A5211f) it is no longer possible to configure any targets that build plug-ins for the Premiere Pro or After Effects SDK. The root of the problem lies in the fact that these targets require a Build Carbon Resources Phase. When such a build phase is present, clicking on the Build Settings pane will crash Xcode. You can verify this on any example distributed with the SDK, or create a brand-new Project and Target. Xcode 16 will let you add a "Build Carbon Resources Phase" to your target only after you have added  an ".r" file (it can be empty.) After that build phase has been added, clicking the Build Settings pane will crash Xcode. Please don't forget to file this bug via Feedback Assistant! It would be rather painful if we find ourselves unable to use the most recent version of Xcode. (And ye

i cant export media via encoder,  premiere pro beta have version 25 but encoder still 24, and buttin is deactive

Always in the past, if doing a mix with the audio track mixer, when stopping after a write, it would switch back to Touch.  Now it sticks on Write, and if I go back on the timeline, it starts writing nodes where I last set the fader. So, this is a church service.  I keep the air mic off while the pastor is speaking.  When singing starts, I hit Write and fade up the fader as the organ begins.  Then I skip to the end of the song and fade the organ out and stop. Now I want to hear that fade out and skip back mid-song and start to play.  No sound.  Then I discover it's still in Write and it has zeroed out the level when I restarted playback. What happened to the automatic switch back to Touch when stopping??? System info    Application: Premiere Pro (Beta) v25.0.0.14    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16

Meine Videos werden nicht auf normale Geschwindigkeit angezeigt zu scnell

Steps to reproduce:    1. Create a multicam sequence2. Look for audio waveform Result: ...Not thereExpected: ...There System info    Application: Premiere Pro (Beta) v25.0.0.14    OS: Windows v10.0.22631, RAM: 63.83 GB GB, CPUs (logical): 16

As soon as I add lumetri color effects to my clips the whole scrubbing is lagging every time a new clip is "loaded" while scrubbing.I deactivated all fx with the toogle button, and i edit with pro res proxies. I can scrub normally when i remove all lumetri effects. 

After adding Twixtor, the video will play normally. But the video freezes in the middle. 

This is frustrating.I carefully spent the time and effort to import my files and create proxies. Then I selected my footage into separate bins (I don't do timeline selection as my projects are too complicated for that). I started working with my selects and I was wondering why the responsiveness to playing media was sometimes so slow. That's when i noticed that the proxy symbol wasn't in the corner (?). I looked at my source clips and the proxy symbol is there, but the subclips? - no proxy symbol. Weird. So I try and reattach my proxies to the subclips. Some attach, others I get the "audio mismatch" error. No rhyme or reason there.Now, side note: I think Premiere should let me override the the audio issue. i don't care about te audio and I should be able to link it up anyway and if no audio shows up in the clip, I could care less. But, PP doesn't let me (arrrgghhhh)...so no solution there.Meanwhile, I can't smoothly playback the media as I normally can with the proxies.It has randomly

Hello,while editing a project, I noticed that the waveforms of some files started to show different visual information than the audio. In other words, the waves no longer match what I hear. In some sections with speech, I see the waves slow down as if there was a pause. In fact, according to the waves, the audio is not even synchronized - however, it is perfectly synchronized when played.Is there any way to regenerate the waveforms to fix this? Visual information is very important for a fast editing.Thank you very much in advance.    

Steps to reproduce:    1. Create a timeline containing at least one audio track from an uncompressed source and at least three video tracks (one AVC source video, one adjustment layer, one image).    2. Apply some effect to the adjustment layer and create keyframes to adjust some parameter over time (for example, linear keyframe Gaussian Blur Blurriness from 0 to 100 in 30 frames).    3. Apply default crossfades to the image placed over the keyframed adjustment layer.    4. Play the timeline segment containing the created stack of layers at whatever playback resolution the machine can handle playing back smoothly at. Result: Smooth video playback, but loud popping and crackling sounds can be heard during the time of the adjustment layer keyframes.Expected: Smooth video and audio playback. System info    Application: Premiere Pro (Beta) v24.6.0.75    OS: macOS v14.5.0, RAM: 16.00 GB GB, C

I've had a few crashes in Beta while editing audio. It was after opening an wav file in the preview window. It will be a soft crash at first, with the menus all being blank when trying to open them. The play head will no longer scrub, but you can move it and play, but everything is frozen on the screen exactly when the soft crash happened. Sometimes Alt+s worked to save work and another time it didn't. It seemed to only happen when editing a separate audio file. It would happen after 1/2 hour or so. It wasn't something that could be recreated on demand, it would just happen randomly.

This bug freaks me out randomly over the last year.sometimes  whe premiere gets an update I open for the first time and start using mogrts the essential graphics panel and now properties panel freeze the whole app this only happens now with the mogrts and when I initally select one particular on the timeline to edit its controlsPreviously I haven't posted but I got a freeze not only mogrts been selected but the clips and graphics elements ike rectangle and with any of them selected trying to open the essential graphics would freeze prI captured the mogrt freeze behaviour in the video and also in the end (previously today the computer reboot and resetting the whole pr preferences halpend but then it updated once more today and it started happening again and this time I filmed it) I had a work around in the end of the video -- to close the properties panel clicking on the effects control panel twicking something in there to initialize and then reopening the properties panel and then

while switching tabs while program monitor has a glich effect downside of program monitor , increase size its desappiere

I tried to add information to my previous post, but it didn't work out, so I'll write a new one.Please treat this with understanding.I don't remember which version of the program it started with, but today, in the current version, which is in beta, there is a problem with the Maintain Audio Pitch.This time I decided to take the issue more seriously, so here I will describe in detail what I mean and how this error can be reproduced.First of all, about the system and hardware (although I think it doesn't matter in terms of sound): The system is Windows X64Video card - GeForce RTX 3070Sound Card - Built-in Realtek HD Now how to reproduce the error: Step one: Take a voice recording (preferably stereo).Step two: Speed up the recording or slow down (Speed / Duration).Step Three: Check the box "Maintain Audio Pitch" Reproducing.It is expected that this function will simply increase or decrease the tone of the recording, but at the output we get "Choral singing".  Sometimes it h

Color icons are objectively better than contrast icons for seeing quickly if something's turned on or not. Even the high contrast one I'd argue is harder to identfity than the color one at a glance.Please give us the option to choose between color icons or contrast icons, not be forced into only using contrast. Current color icons (top) vs the 2 new contrast icons (bottom):Additionally, even if I wanted the high contrast one because it's easier to see, the rest of Premiere is so hard on my eyes with that really bright text so I wouldn't be able to use it long term. I do appreciate you've managed to slim up that part of the UI however, so thank you for that.

I've reported this bug before (years ago) and nothing's been done to fix it:If I make a mogrt using AE sliders and import it into PPro, none of the sliders' values show as anything other than integers; eg. if I've set the "start time" of something to "0.5" in the Properties Panel, it shows as "1". Even when I click on it to edit the value, it still shows as "1" even though PPro is in fact seeing it as the correct "0.5". If I change it to "8.15", it shows as "8". I think in ye olden dayes of mogrts, even though PPro showed fractional values as integers, if I clicked on the value to edit it, PPro would show the correct fractional value. But not any more. I'm on PPro Beta 24.6.0x75, and the latest, corresponding version of AE Beta. This is a really annoying problem that's been around for a LONG time!

Cannot get to the text for sub titkes, need fonts color and sizes where is it?