Premiere Elements

"We have detected an incompatible display driver. To get a better and faster playback performance, please update your display driver."Sorry, I think that I have followed all of the other threads. The bios "fix" doesn't work for me because of my platform (Windows 10).I am running an Alienware laptop with the latest drivers. (NVIDIA GeForce GTX 1080 and an Intel HD Graphics 530).Help will be appreciated, the software is useless to me as it is.

Can someone please help me to get my serial number in my acct.[Moderator note: moved to appropriate forum]

Hi,I am using Premier Elements 11 and 12 to edit my videos.in HD and despite burning a perfectly good DVD the menus do not work nor will the DVD play in my Panasonic DVD Player if the disc has been burnt using the AVCHD preset. I can burn a DVD in HD Widescreen that will play but the image is not sharp. . DVD's edited and burnt in HD Widescreen on earlier versions of Premier Elements have always worked well. I am using TDK discs.I am using a Canon HV30 to film in HD and a Canon XA 10 to film in AVCHD. The setting I am using to edit in Premier Elements is -Pal-AVCHD-Full HD 1081i25 and the preset for burning DVD's is AVCHD H.264  1920x1080i Pal Dolby.Can you offer any suggestions please.

I am separating video clips with text titles, with the text animated by fading in by characters.  If I apply a cross-dissolve transition, either at the end of the video clip, or between the video clip and the title, then two frames before the start of the title the entire title text line appears for one frame.   Can this be prevented?

I have tried to get someone to help before, but didnt get the problem solved. Heres my computer information first that ill give you so it will help you figure out the issue.It is a Windows 10, laptop,It is an AMD A6-4400M APU with Radeon HD graphics 2.70GzRam is 6.00GB(5.46 usable)64 bit operating system, X64-based processorSamsung electronics329GB free of 437GB, which is weird because 437 is not how it started.Now the problem started when the program lagged alot ever since installing an upgrade for avast antivirus. I decided to shut off my laptop and turn it back on again, now ever since after that i click on the program and it wont start up. I have to uninstall it and then reinstall it to be able to use it every time after closing it down for it to work, but even so, it still lags alot and it seems to be getting worse slowly, it wont even play back the preview of the video in the editer even after rendering it all.Before i reinstall it a message comes up saying Weve encountered the f

Ok I know it is possible to connect certain cameras and recorders to a computer and record through Premiere Elements 12 using those devices, however, is it possible to use a smart phone in the same way? I'm trying to avoid the "record then transfer from device to computer" route but I'm not sure how long my actual camera that can record video will record before deciding to stop recording.The phone I'm planning on using is a Samsung Galaxy S7.

BonsoirJ'ai un souci de son avec mes fichiers M2TS dans Adobe Premiere Elements 14J'ai bien le son dans la fenêtre de visualisation, mais une fois sur la timeline, plus rienSur mon ancien PC , je n'avais pas ce souci.Les deux sont sous windows 10Pour le son, le nouveau a une carte RealtekPour la Carte Graphique, Nvidia GeForce GT 720 2 GB.Merci de votre aide.

How can I burn or copy my slideshow onto a flash drive for viewing onto a tv? I've been burning onto DVD dual layer but the quality isn't very good with only being able to select 720x576. I want the higher quality resolution of 1920x1080. I've created a 2 hour slideshow with music. I want to keep the movie menu's that I created as it's nice to select Play Movie or Scene Selection. Is all of this possible or am I stuck with using DVD dual layer and low resolution? I can't burn onto blu ray disc, because I'm giving copies of disk or thumb drive to people as gifts and not everyone will have a player.

Bonjour!J'ai un problème très énervant sur Premier Elements 15, quand j'ajoute du texte à un élément sélectionné, le texte s'applique normalement, je peux faire des réglages et quand je clique sur "terminer" , le texte est au milieu de l'écran et ne suit pas du tout l'objet sélectionné. J'ai beau consulter tous les forums possible, pas moyen de trouver une solution... 

Hello - New to Adobe Premier Elements 2018, actually checking out the trial version for the past couple days. Coming from experience in Power Director, and have done a fair amount of video editing, mostly for sports clips and highlight videos.  Looking for a better workflow than what I have now, thought the Organizer in Elements was going to be the answer, but not loving it.  Wondered if anyone has any better ideas or can point out something I'm missing.My standard workflow: record kids sports, usually many video clips of a given game, start/stop producing small clips throughout a gamehave the video clips in Windows, directories for each sport/date/gamethought I would use Organizer to TAG video clips that have good plays (tag by person and type of play), eventually wanting to gather them into a highlight video. create highlight video with clips from many different games/dates/playersThought the Adobe Organizer was going to offer great capabilities for exactly the above, most

Müssen und können MOV. Dateien (Videos von Iphon) von Adobe Premiere Elements konvertiert werden? Ich habe versucht eine DVD zu brennen - aber die Dateien sind im DVD-Gerät nicht lesbar...

Hello,I have Adobe Premiere Elements 12, and as far I'm aware I'm unable to add a timecode to my videos. Is this possible in Elements 12, and if not, if I upgrade to Adobe Premier Elements 18, is this feature included?FYI: I am interested in collating raw footage into one long video, and applying a timecode before I send it to a professional video editor with edit instructions.Also, will Elements 18 enable me to save my video files as smaller sized files than Premiere 12? In 12, the smallest I'm able to save a 20 minute video is 1GB, and I'm hoping to be able to save them as low quality, 400 MB files.This may be my naivety, so any help suggesting how to save my videos as small sizes would be greatly appreciated as well.  Thank you,Lucas

Premiere Elements 16.0  After rendering / saving and closing a project why is re-rendering required  when the project is opened again. No additional changes were made, just saved and reopened the project. The rendering did not seem to survive being closed.

Ich habe heute Adobe Premiere Elements 2018 gekauft und mit Administratorrechten unter Windows 10 Home, Version 1709 installiert, d.h. das Installationsprogramm wurde ohne Fehlermeldung abgeschlossen. Es wurde auch der vorgeschlagene Pfad C:\Program Files\Adobe verwendet.Beim Starten von Adobe Premiere Elements mit Administratorrechten bekomme ich nach ca. 5 Sekunden die folgende Fehlermeldung:Mit der Fehlermeldung komme ich leider nicht weiter. "Debuggen" führt leider ins Leere und mehr Informationen sind dem Programm nicht zu entlocken -- zumindest nicht für einen Laien. Hat jemand vielleicht ein ähnliches Problem?

I made an 8 minute video by combining 8 minutes of mp3 audio with about 10 seconds of a Quicktime movie superimposed over one part.  The screen is blank for almost the entire 8 minutes.I then choose to export the video with YouTube widescreen SD settings, 480p. It's taking a LOOONG time. It has spent 15 minutes so far, and the "remaining time" just keeps creeping up, now claiming 1 hour 15 minutes remaining in the export. Any idea why this is so? Shouldn't this be a very quick and easy task?

I just installed Premiere Elements 2018 trial, and when I tried to get media from camcorder it does'nt recognize any devices. is there a limitation in the trial version?

Newby to the amazing world of video editing.  I have several projects (short ones) ready and want to burn them onto a DVD that will play in DVD players on most TVs.  I can do that with individual projects by burning them direct to disk as AVCHD files - but I don't see how I can do multiple projects onto the same DVD.Appreciate any help and bear in mind I am definitely a NEWBIEThanks'

Hi,I came back from vacation and I put some files into Adobe Premiere 12 to edit them together to make one video of my vacation.  I use a Canon Vixia HF 200 camera and also a GoPro Hero 3+When I edit the video in the software it looks clear.  When I exported it to an Mp4 it looks awful.  Not clear at all.I want to keep the edited version on my computer and have it as a file to be able to watch or download to a DVD or another up to date format in the future.  Can someone help (in layman's terms) and tell me what output I should be using to get a better quality video?  I'm technically challenged so if you have questions I can try to help.Thanks in advanceStacy

Ich habe seit heute das Problem, dass Adobe Premiere Elements 14 beim laden eines bestehenden Projekts nach 3% abbricht mit der Meldung "unbekannter Fehler". Gestern habe ich noch an dem selben Projekt gearbeitet und die Sicherungsspeicherungen sind vorhanden, laden jedoch auch nicht.Kann da jemand helfen???

Hey, I was wondering if anyone knew how to get a video you created on adobe premiere elements onto my phone. I know there is an option that formats it for your phone, but how do you actually safe it to your phone video library? Thanks for the help!Luca[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Moved from Premiere Pro to Premiere Elements... Mod]

Hey I'm about to buy adobe premier elements 2018 and the system requirements say that I need an intel core i7? Is that really necessary? I have an i5, is that good enough? Thanks in advance.Luca[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Moved from Premiere Pro to Premiere Elements... Mod]

I am shocked!  I thought I would give PE 2018 a try by loading a project I just saved with PE 12.  All my .MTS videos are marked "offline".  When I tried to locate just one of them, I got the error "the selected file cannot be linked because its type (video) does not match the original file's type (audio and video)".Any help would be greatly appreciated.All of the MTS files are of the same type.  I appended output of "mediainfo" on the first file below.GeneralID                                       : 0 (0x0)Complete name                            : C:\footage\0711 59.MTSFormat           &nbs

At some point in a project, I've wanted to butt two clips together that I had previously cut apart which left an edit point. I now simply want to remove the edit point and leave the 2 clips as 1. Is there a way to do that?

Hi,I would like to remove the music from a video using Premiere 2018.Can anyone help?Thank you Evakant

Hey I am new to this community, I was wondering if anyone could answer my question. I have a work laptop (Mac) and a private laptop (windows). When I buy the adobe premier software online, it tells me to choose a software, does that mean that I can only download it on windows. I know you have 2 downloads available, and would like to download one on my mac and one on my windows computer. Thanks in advance.Luca[Here is the list of all Adobe forums... https://forums.adobe.com/welcome][Moved from Premiere Pro to Premiere Elements... Mod]