Premiere Elements

I'm trying to duplicate a title clip to play before each song in a concert recording.When i select the title and go to duplicate under the edit tab, the option is grayed out. I saw it suggested here that I duplicate the title in the project asset box, but I only see my video/audio files there - no titles.Am I missing something obvious?Thanks,

When I try to use our Elements 11, the options in the drop down boxes are illegible and there is no minimise and maximise options visible.  Can anyone help?I did think about uninstalling and re-installing but I'm not sure if you can re-use the same serial number?

When I try to launch Premier Elements 15 I get an error that my display driver is incompatible, when I click "ok" in the dialog box the program closes. I have checked my display driver, (NVidia GeForce GTX 1070) it is up to date. I rolled the driver back with out luck, I tried the deleting the "baddriver" file as suggested in several other similar posts on this problem.  I even tried removing and reinstalling the program. I have several other Photoshop programs and they all run with out any problem.

Hi all,I've just downloaded the Windows 10 64-bit trial of Premiere Elements 15, and I'm experiencing an odd issue: I can't seem to import any files from my Samsung Galaxy S7 (or any other smartphone). When attempting to import photos, the Adobe Photo Downloader identifies my device without any problems but hangs permanently at the message 'Connecting to device... Please Wait.' When attempting to import videos, the program crashes immediately. I can view the files and folders on the phone using the standard 'Add media from files and folders' option, but when I select a file and click 'Open', nothing happens.I can copy both photos and video to my computer using Windows and import them to PrE from my hard drive with no problem at all, so it isn't an issue with the files themselves.Is this just because my Galaxy S7 isn't on the list of supported devices, or is there some larger issue here?Thanks in advance,Thomas

In the process of creating my movie and experimenting with different sound tracks, I would like to temporarily mute the audio on multiple clips, but I can’t find a convenient way to do it.  I don’t want to delete the audio as I may revert back to using it.  I am aware of two methods, however both can only be used with a single clip.  (I want to do in a single operation with multiple clips).Method 1:           Unlink audio and video, then disable audio track.Method 2:           Right click on clip, select Audio Gain, and set gain level to -96 db.Both of these methods are tedious when you need to apply them to many clips, and equally so if you want to revert back to the original.

I am currently trying to install Premiere Elements 15 silently. I also need a way to automate the licensing process. I am going to be providing this application to multiple users via SCCM and I need it to be automated and zero-touch for the end user. I have installed the product silently using the following command: oem.exe -P PRE -SERIALNUMBER xxxx-xxxx-xxxx-xxxx-xxxx. However, once it installs it asks me to sign in to adobe to register the product. I am in a classified environment that does not have internet access. I need a way to do the following: 1) Installs silently with no user interaction. 2) uninstall silently with no user interaction. 3) a way to license the product via a script or registry fix so that I do not have to sign into Adobe. Does anyone know if any of this is even possible with Adobe Premiere Elements?

Hi,I'm new here, I tried to use Premier Elements and I'm really liking it It was easy to use compare to other that I tried. Now that I was finished with my first video and planning to purchase a license. I was prompted that it is not available in my country. Can anyone help me to get a copy of this? I'm thinking of changing my region but I'm afraid it might cause problems with my credit card's verification on payment.Thank you,Daryl

I have always experienced fitful stops and starts in preview mode.  Even after rendering, whether, in a draft or hi-res mode, I get the same fitful, jerking, stops and starts.  It was suggested that this might be a buffer issue because if I toggle stop/start the project runs a little smoother, for a very short while. My project includes about 8 still images; 2500 pixels at 300 ppi, with a couple soundtracks, fad transitions, and some animated titles, that I customise using keyframes on my timeline.  Sometimes, right after I render the project, that starts automatically when it's done, the sound fads in but my animated text jerks in, haltingly, jumping into motion then stopping and starting again.  Then, even though the CTI is passing over an image, the Monitor Panel remains black. The image eventually displays usually just before the next image reached. I have talked endlessly with Steve Grisetti, who has written books on PrE and runs a PrE forum but neither he nor

Hey everybody, i am struggling to lower the fps rate of a video clip significantly in order to give it something of a retro touch.I can't imagine that this is not possible, also in Premiere Elements 15. Any Ideas?

I do not know id it is connected, but since a recent Windows 10 update elements has stopped videos playing in the time line.

Hi,I have downloaded a trial version og premiere elements 15, but there are many different issues so I think maybe premiere elements will not work for me.The issues I have are:Unable to import m2t (HDV files). Codec not supported.m2ts files are imported, but there is no audio for any of these files.The dates are a mess in the organizer. Supposed to be sorted with newest on top, but it is not the capture date that s used in PE 15.Is there any way of resolving these problems?Or is there another software/program that will work better for me?Can anyone help?Thanks!Julie:-)

There it is!Not an internet issue - on line!The download goes through the motions and at about 80% it dumps the above warning?None of the create templates will download.Suggestions welcome. If only PSE 7 would work with W/10 (*&&^%%$).

Hello,I'm recording a video (video is stable and normal in my original recordring using a Panasonic HC-V110 with REC mode set to HG1920). I put togehter my project in Premiere 14 and use the rendering option so that my bar is green before I save my Project as a .mp4. After I've exported my project to .mp4 the end result is shaking and looks like crap. What is going wrong here?Thanks,Marcus

Hi, have re-installed my program adobe premiere elements 12 but it does not workBrBengt-Göran

Hello,Years ago I created a movie-dvd from some pictures and music in Pinnacle...apologies 🙂Now I would like to create a MP4 of the DVD but I can't import the vob-files into Adobe Premiere Elements. The pop-up says the DVD might be protected.I also tried to copy the vob-files from the DVD to my c-drive and that didn't work neither. The files are just not being copied...I tried on 2 PC's 🙂Does anyone know how I can create a MP4 from this DVD?Thanks in advance!SJW

Is there an error log in Premier Elements 15?  It's erroring out at final step of burning BluRay image to hard drive. 

Hello,When exporting a 1080p 60FPS video, it seems like it takes a while, and my CPU usage sits at around 50-60%.  15 minute vid takes 25-30 to export.    My system specs are as follows:AMD Ryzen 5 1600 OC to 3.9GHz16 GB RAMWindows 10 Home 64 bitShouldn't the CPU usage be higher while exporting?  I already checked to see if all cores are used, and they are.  What am I missing?  Thanks in advance for your reply! 

Hi! I have premier elements 10 and am trying to add a custom colour wash (#95eadd) to a video clip. I'm really struggling to figure this out and would really appreciate any advice :-). Thanks in advance!

Will premiere elements 15 import a file with .MXF extensions from Sony FS-5 ??

download says sr # is not valed?

Hi GuysDoes someone know how I can specify / customise a thumbnail for my videos?I Googled a few sites but could still not find a working answer.The most common answer was that you must place your timeline marker on the frame you want Adobe to use as the thumbnail but it, as it seems to be with other people with the same question does not work.Your help will be greatly appreciated.Thanks, Jax.

I am trying to create a video of still pictures set to music In Premiere Element 13.  I've made several of these but always deal with this same time consuming problem that probably takes up more time and trouble than ANYTHING else.  I really like my images to transition with the music so I end up editing the duration of both the images and the transitions to get things to flow closely with the music.The problem is that if I make a change in timing to an earlier image, everything else changes as well.  Instead of everything that follows readjusting to the new timing, Premiere adds a break in the music and the images. When I try to move things over to re-attach to the piece I've just adjusted, the timing on everything else (that I've worked so hard to get right) changes as well.    The duration of images gets longer and the transitions disappear.  It is so INCREDIBLY frustrating.  I'm surprised that the rest of my images and transitions don't just

I have just re-installed Pe11, having not used it for quite some time. No real problems, apart from the fact that I got the message to say that I have to install Quick Time, for the programme to work. I now know that Apple are no longer supporting it and just wondered whether this makes the product totally redundant. The aim of re-installing is simply to enable me to lift some video from a Sony Digital 8 camera and transfer direct to an external hard drive. I'm a relative beginner and do not want to waste too much time unnecessarily.Any help gratefully accepted.

Okay I have done several DVD's over the course of time and I have always "saved" as I went along and than at the end went to project archiver and copied the project. However today I went into my Adobe folder and my external to view exactly what was being saved and did not find my project from Premier Elements in my Adobe folder, I had not done that in the past. So my question is in Premier Elements should I also be doing a "save as" or a "save a copy" as I am going along? This would be in the event of a hard drive failure. Not sure why I hadn't discovered this before and guess I was just fortunate not to have a loss of my hard drive. I am using Windows 10, and Premier Elements 12.  Thanks.