Premiere Elements

@ich habe neuerdings, außer Adobe Photoshop Elements, wie bisher, zusätzlich Adobe Premiere Elements für die Bearbeitung von Videos. Bei der Bearbeitung von in Alben im Organizer gesammelten Fotos und Videos, habe ich nur bei den Videos das Problem, dass sie sich nach der Bearbeitung (Schnitt, Belichtungsänderung etc.) nicht speichern lassen, d.h., beim Abspielen im Organizer erscheint immer wieder nur das unbearbeitete Original-Video. Was mache ich falsch, oder kann das evtl. ein Programm-Fehler sein? Hat jemand von Euch vielleicht eine Lösung?

Once I have uploaded separate audio and images, how do  I adjust the timeframe of the images as a group, not one-by-one?

Hello,For the last week I have been unable to launch Premiere Elements 14. I keep getting the bad image message below. I have already done a re-install. It launched correctly straight after and then I had the same issue again when I tried to launch it again later the same day. I am running Windows 10.

It was working yesterday morning, by afternoon - with no changes at all, it stopped and gave me 2 error messages related to DLL files.  I went back and re-downloaded and re-installed the program from the official site, but the errors remain.  The "organizing" and "Photo Editing" will work, but the Video editor produces the following errors.  I also get this error:What can I do to fix this?  Is there some place I can get these DLL's and replace the perhaps "broken" ones?Please help!

Total newbie/analog guy. Using PE 15 in the Expert mode. Trying to insert ppt slides into a recorded presentation. I can get the video and the slides (PNG Files) into the show no problem. My problem is that the slides are not proportionate to the screen. In other words, when I insert the slide it doesn't cover the entire the entire video. I tried sizing the slide, but adjustments are made in all four directions and the slide becomes too large. Is there a way to be able to size the slides so they are seen in their entirety and cover the full range of the underlying video? Any other ideas? I thank you in advance.

I am desperate... Searching everywhere, not finding how to change the default settings of my Premiere Elements 13 Titles & Text. Everytime I open Titles the lettertype is Absalom (you know, no one can read that..) and pitch is 250 (how can that be..). Please help, I want a NORMAL default lettertype plus pitch.

Hello, and thank you for taking the time to help out.I recently had my original computer crash on me and it is in a no-boot state. The files however, are accessible. I'm running Premier Elements 11 on Windows 10. When I built up my next computer, I installed Premier Elements 11 and pointed it to my old library.When I opened Premier, on the right side of the screen, I had no tag tree hierarchy like I had before. On my pictures, there are definitely a large amount of tags that are not in my tag tree. I'm wondering if it's possible to find the tag tree file on my old computer. I see that when you go to the tag tree, there's a plus icon next to keywords, and under there you can click "import keyword tags from File". On my old computer is there any way to find those tag files?

My travelogues comprise of video clips, photos and maps. Is it possible to animate a graphic, a round dot for example, to show a route of travel on a map or onto a photo to show a climbing route. Someone suggested adding, in Photoshop,a dot to the map at the start of the route, save the file, add the second dot then 'save as' a different filename then repeat, adding more dots until the end of the route.  A transition between photos could then be set at a fraction of a second. This could lead to dozens of files and I suspect that there is a much better way using Keyframes but I may need to see a demonstration video of a similar project.

I have a photomerged landscape and have used the pan and zoom tool to pan from left to right. The duration of the pan seems to default to five seconds and this is too fast. I have Steve Grisetti's book: Photoshop Elements and Premiere Elements 15 and have tried to find a way of increasing the pan to ten seconds. It seems that it would be possible to time remap a video clip but not a photomerge. I have taken this route with the photomerged landscape to avoid the large blank spaces above and below when on screen. Have I missed the solution when browsing through the book?I also have a question on animated graphics. My presentations are of my travelogues comprising of video clips, photos and maps. Is it possible to animate a graphic, a round dot for example, to show a route of travel on a map or onto a photo to show a climbing route. Someone suggested adding a dot to the first frame then to successive frames as it moves along the route then setting an interval between frames of less than a

When I bought my latest PC, I had a solid state hard drive installed as my C Drive. It is only 128 Gb, but I figure it would be sufficient, since I would only use it to store programs, and no data. That is essentially what I have done.However, in just a few short months, the free space has shrunk to about 10 Gb, and continues to shrink daily. By far the largest largest folder is....appdata/roaming/adobe/common/media cache files/ which is about 39 Gb. THey are basically .cfa files from old and newer projects.Can I delete these files when I am no longer actively working on the PRE 11 project? A second question - If I uninstall/re-install PRE 11 onto a different internal drive (which I have started to do with other programs), will this folder follow it, or will the Media Cache folder still be on the C Drive?Is there a better strategy for conserving and recovering my C Drive space?Thanks in advance

I'm having troubles entering the serial  number. It's saying that the number they gave me us not valid for adobe premiere elements 15.

Ich möchte eine benutzerdefinierte Vorgabe für den Export unter der Rubrik Gerät erzeugen. Wie ist das Vorgehen oder wo finde ich die nötigen Einstellungen?

When I try installing elements 14 this is the message I get. adobe elements 14 fails to initialize during installation in windows 10. How do I go about solving this issue?

every time I try and burn a blu ray from Premiere Elements 11, the playback from the finished product in my bluray player is drastically choppy.  Ive spent hours and hours trying different things and trying to find videos and pages/forums that will help but constantly let down. The video file is in 4K and works fine when rendered down to low res files... but this is not what i want for my customer.any ideas?

"What gives?"

Please could someone advise me. I have an edited video on my removal hard disk and want to print it onto disk.The video loads ok on to Premier Elements 14 and I press 'Export and save'.I click on the disk symbol then 'dvd' and so onto until 'scan'; all is ok up to this point.When I press 'burn', a grey box comes on the screen with the word  'indexing' and a task bar underneath. After leaving this a long time, it becomes obvious the task bar is not going to fill and the video won't start burning.Does anyone know please why this might be happening?cheersJohn W[Moved from Premiere Pro CC forum to Premiere Elements forum by mod]

Having problem importing widescreen video into Premier Elements 15. Set new project to PAL widescreen 16:9 format and force all imports to this format. Import my video but this then displays as a squashed 4:3 format despite the imported video having properties saying it is a PAL widescreen 16:9 format file. Using the same import setup with other video editing software the imported video displays with a 16:9 aspect ratio. If I import and save video from another programme then load it into Premier 15 it displays as I would expect with a 16:9 aspect ratio. Am I new to Premier elements so am I doing anything wrong?

I have a HP PC that includes adobe premiere elements 11 and adobe Photoshop elements 11. Both of them receive an error code of  213: 19. It suggest restarting my computer and instead recently I had to reset my computer. The same issue occurred, so I restarted it. It still shows the same error and now says to contact customer support for further assistance. What is going on?

Hi there, thanks for reading my question.I see that Elements has motion tracking, which is great.  It looks easy to use, also great.   I'm wondering if the tracking is accurate enough that it could be used for replacing faces in video.Assuming both faces have the same orientation to the camera would the replacement face stay exactly on top of the original face?   Or is the tracking only accurate enough for things like thought bubbles, where close is good enough?Would tracking resize the replacement face as needed to match the size of the original face as it moved towards and away from the camera?  Can tracking handle both scale and position?I'd love to hear from anyone with comments, especially if you're doing this kind of work  yourself.Thanks!

Greetings,I regularly modify my videos in Premiere Elements mostly to crop the videos of the useless moments.I then export the resulting video using the export and share button.The problem is that the resulting file's exif data concerning the date is all set to the date of export of the file and not the original date of the video.Therefore the video does not appear at the right time in Organizer Elements.In Elements Organizer you can modify the date and correct the behaviour but apparently this modifies only an internal date setting inside Organizer and it has no effect on the file metadata. And this metadata is used for example in Google Photos. So this completely disorganizes my phototimeline.I did not see any parameters on date during the export I could tweak to avoid this behaviour.Any ideas on how to have exported videos keep the exif data data?Thanks in advance,Cheers

I know that earlier versions of premiere elements did not support collaboration between apple and windows via sharing a .PREL file. Is this still the case with pe15?Anyone know of a way to get .PREL files between windows and apple? I'm currently on PE 14TIA, maypo

I have been using Premiere Elements 15 for about 2months after using Camtasia, formerly Camtasia Studio, for over 12 years. In Camtasia it is straightforward to create callous either manually or via a Power Point plug-in then render an MP4 output with a custom player that displays those callout single frames as a Table of Contents (TOC) with thumbnails of the frame. The organizations I am working with are more familiar with Premiere, but none of the users have found an equivalent way to create an indexed output video with Premiere Elements. Does anyone on the list have a reference or experience in creating a similar TOC with thumbnail index on the output from Premiere Elements as we understand is possible with Camtasia?Thanks, Mark

I want to insert my own images with transparent backgrounds over the top of video clips in premiere elements (on free trial version atm) but cant see a way of imposing them onto an existing clip. Can anyone provide any advice? Not sure if this is even possible! Thanks

I would love to see Adobe add multi-cam editing to Premiere Elements 16. Other less expensiveproducts are able to do this and would hate to see Adobe get passed by because of this feature.

Hallo,ich habe einen neuen Rechner mit Windows 10 Prof. Inzwischen habe ich bereits 2x Photoshop und Premiere Elements installiert, jedes Mal lief die Installation ohne jeden Fehler durch und meldete dann, als ich versuchte, das Programm zu starten, ich solle den Rechner neu starten. Nach dem Neustart war keines der beiden Programme zu finden, weder in der Liste der Programme, noch in der Systemsteuerung - ich krieg die Krise!