Premiere Elements

I record 3 audio layers in my mp4s via OBS. When i come to edit the videos afterwards i can only extract layer 1 on elements. Is the program not able to see the other two audio levels, or am i just not looking in the right direction?

Hello, I have been using PE14 for over a year without a hiccup. I took advantage of reduced pricing on PE15. I get the above message right after double-clicking the icon. It doesn't even try to run. The same for the Photoshop Elements 15 that came with it. PE14 still runs just fine.I tried some of the old fixes, setting my BIOS to Default, I also notice another post here saying to disable Lavasoft, I did so. I have the latest NVidia driver, and with Win10, you just can't get away from updates.I have Win10Pro 64bit, Intel i7 3770, 16GB RAM, over 70% free on a 4TB disc 0% fragmentation, and I haven't cussed it yet. Any ideas?Thanks muchDuke

When zooming in on the timeline a horizontal blue line appears on the right hand side of the current time indicator. Once this blue line reaches the end of the video it stops playback before the last few frames have shown. Is there a way to stop this and allow the time indicator to make it to the end of the clip?Thanks.

Started a project and want to use 720 p resolution with different frame rates (30 fps and 60 fps). Already tried to mix the two types and it does not look very good. There must be a way to combine both and still have good results. what can I do??

HiRunning 1920x1080 all the way - but wonder about what is usually available 24p or 50i.H264 has predictive frame in between I-frames, but how is this done with this kind of encoding.If you are to encode just every other line you will get a lot of change on every P-frame.Or is every frame presented and encoded the same, and player just picks every other line for presentation?Like if 25p original, that you encode that H264 25 fps and it is up to player to pick each frame at double speed and presenting top line frame first, and then next frame 2nd line down every other line.I like the smoother look on 50i, since I run PAL - but like it is tiny bit more grainy.So would be great to know if any good reason for that.Thanks.

I am adding a nature audio clip to my DVD project, it has piano music with nature sounds in the background. Is there any way that I can lower the volume of the piano thus increasing the nature part of the audio clip? It is a prerecorded clip. Thanks

I have been using a Vixia HFR 700 HD video camera to tape videos for some time.  I have never had an issue editing them using Elements 14 on my PC.  Recently, I made several videos on the same memory card and downloaded them to my PC for editing.  This time 4 out of the 7 videos play just fine when loaded as media on timeline for editing, but the other 3 won't play properly.  I enter them as project assets, move them to the timeline, and when I hit play the video plays fine but after about 5 seconds, the audio starts skipping and rambles on in a scrambled skipping mess.  The audio goes haywire for the balance of the 10-15 minute video.  I've tried rendering with no change in result.  The videos play fine on my PC using windows media player, but when I try to play them on Elements, the audio won't sync to the video.  The weird part is that other videos recorded on the same memory card at the same time work fine.  Is there a setting or adjustm

I recently had to get a new computer. I got to work on Adobe Premiere Elements almost immediately - both a new project and an old project.In both cases, I ran into glitches - either the video was pixelated or the background was missing. After working on it, I've got it stuck in an ugly position where the screen is either stuck on black or in permanent freeze-frame. By that, I mean even though I can hear the audio, the picture never moves (unless I click on another image).[Moderator: moved from non-technical forum Lounge to Premier Elements.]

I just bought a HP 25es to work with Adobe Elements 14. but I can not get the video to playback full screen. I get a large white bar on bottom of monitor and black bar on right side.Have no problem playing back video full screen in QT.Using monitor with HDMI cable connected to a macbook pro in the lightning connection. Tried changing scaling options but nothing helps.Any suggestions?

I found information, that Adobe Premiere is registered to account and can be installed up to two computers, but only one can be used simultaneously. What if I change computer two times? Do I have to buy new license for the third computere (if the two previous ones are not used)?

I have a new Dell Inspiron 24 5000 computer and since transferring my PE 15 software and files to this pc my PE 15 has not been working correctly. While editing if I advance from one segment to another and then hit the play the audio will play but the video does not advance. My pc specs are: W10, Intel(R) Core(TM) i7-6700T, 64 bit operating system x64 Based processor.1TB drive Installed RAM 12.0 GB After creating a Menu I ran the Preview Disc and the video ran correctly from the home menu, but when I went to the scene selection panel the panel did not appear therefore I was unable to select any of the scenes on this panel.Please let me know what is causing all of these problems.

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"><html><head>  <title>Untitled</title></head><body><cfxml variable="pdf_ddx">  <DDX xmlns="http://ns.adobe.com/DDX/1.0/"       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"      xsi:schemaLocation="http://ns.adobe.com/DDX/1.0/ coldfusion_ddx.xsd">   <PDF result="Out1">   <PDF source="Doc1"/>   <PDF source="Doc2"/>   </PDF>   </DDX></cfxml><cfif IsDDX("#pdf_ddx#")>  Is DDX <br><cfelse>  Is NOT DDX <br></cfif></body></html>The result is "Is NOT DDX"

In PE 13, I used Time Remapping to apply slow motion to a short video, just slowing  the entire clip down to 1/2 speed.My sound track remains the same length as the original shorter video however. Is there a way to just apply the audio track from the first half of the video to the second half; in other words, just repeat the audio so the total length matches the new length of the video? (It is a simple pan shot of a waterfall with constant sound.)

I started a project with both video clips and added photos to it.  Everythi8ng seemed to be working fine.  I changed the time that some of the photos appear on the screen - still everything seemed to be working fine.  Today I started working on the project again - and my photos do not appear on the timeline in Expert mode - but the DO play on the screen when I play the video.  I need to get these phots in sync with my music track - so need to change more time they stay on scrren - but I can't see them to select them.  I have to go to Quick mode and then the photos appear on the time line - then I have to select the clip in Quick mode - but Quick mode won't let me change the time they stay on screen - so then I have to go back t Expert mode and change the time.  There are a lot of clips to do this way - too cumbersome - especially since it USED TO WORK in EXPERT mode.  Anyone have any ideas what is happening?  New to Premiere - so I could be doing

Hi - my Adobe Premier 11 Video editor is not workingI have installed it successfully in the pastI have used it for two years without a problemI did notice it kept stopping during my editing clean upI have freed up around 25 gig on my C: where the programs runsI have noticed that the Photo Editor opens perfectly,  only the video editor wont startPlease send help!

For our school's booster club I search through hundreds of still pictures each sports season and select the 40 to 50 best.  I add captions/text to each picture along with some title pages.  Then I insert music so that this slideshow plays to music (so coordinating that music with the slide advancement is important).  I then convert the slideshow to a video.  The video is then distributed by email to the school community.At some point, I'd like to insert short video clips in addition to the still pictures. I recently purchased Premiere Elements 15 as it appeared to me the best software for the type of "movies" I was making.  Upon further review, I'm wondering if thinking I'm making a "movie" is incorrect when in reality I'm simply converting a slideshow to a video. I would very much like to hear opinions on whether Premiere Photoshop 15 would be the better/easier product for me to use rather than Premier Elements 15 that I bought.THANK YOU!

I am trying to burn a short DVD. When I select burn DVD, just at the end  I get                       internal software error:/Vobulator/BlockPlanner/ Block Planner cpp.line 215 If I save to file as MPEG and burn I get the same errror. If I take off the Menu I have set up , it works OK If I clear the menu and use a different menu, its still the same. The video is very simple with main menu marker at start, end marker, no scene markers, my own shot as picture for menu, which is resized, and simple audio track I am working in parallel on another longer video and this still burns Ok, It is longer and has  a menu OK

I am using Premiere Elements 14 and had to make about 15 videos for work recently. One of these exported videos is missing half the video clips and all the audio. All of the text captions are still visible, however. The audio and video is all visible when I preview it in Premiere, but is gone after exporting.All of these videos were shot with the same camera and microphone and imported/exported the same way, so I am not sure why just this one is giving me issues. Thanks in advance for any help!

Hi - my Adobe Premier 11 Video editor is not workingI have installed it successfully in the pastI have used it for two years without a problemI did notice it kept stopping during my editing clean upI have freed up around 25 gig on my C: where the programs runsI have noticed that the Photo Editor opens perfectly,  only the video editor wont startPlease send help!Problem signature:  Problem Event Name: APPCRASH  Application Name: Adobe Premiere Elements.exe  Application Version: 11.0.0.0  Application Timestamp: 5041d43d  Fault Module Name: WorkspaceManager.dll  Fault Module Version: 0.0.0.0  Fault Module Timestamp: 5041d2a6  Exception Code: c0000005  Exception Offset: 000000000000bb86  OS Version: 6.1.7601.2.1.0.768.3  Locale ID: 3081  Additional Information 1: 548c  Additional Information 2: 548cd48eca8b94a71c47df1fc7a5ed12  Additional Information 3: d8d7  Additional Information 4: d8d7bc5cdfc4e5616f4a587cf8

This is my project, final edit is 1 minute and 12 seconds long. However my timeline is almost an hour after using all that space for editing. Below you can see the timeline only highlights the video, however when I export, its exporting my ENTIRE timeline. There is probably a very simple and obvious solution, but I'm still a novice. Please Help!!

Please help,I have been Premier elements 10 for some years with very good results, but I have just produced another movie and when I try to burn a disc I get an error message saying "Transcodding error".I have uninstalled and re-installed the software but still get the same error, also when I try to to re-burn a movie that I previously compiled and burnt without a problem I get the same error message.Between the two movies mentioned above I have changed from Windows 7 to Windows 10.I am using a Dell vostro PC.Many thanksAlan

I need help Adobe Premiere Elements 12 is not working.[Moved to Premiere Elements from Premiere Pro forum - moderator]

I amusing Elements 14 Premier on a PC with Windows 10.I'm trying to create a slide show to burn to Disk. Elements 14 says it can't do this because I need permission and that the drive doesn't exist.Anybody had similar experiences and if so how did you overcome them?[Moved from the Lounge (which is where you can "connect with your peers" from across all of Adobe's products for conversations that don't directly relate to help and support) to a product-specific support forum - moderator][Also, removed font formatting from post - moderator]

If I remember correctly, the software crashed about a week ago.  Ever since then, this is what I get(see imagaes below).  You can click on the icon on the task bar once it is "open" but the programs window will not show up on the screen.  I have uninstalled the software from my computer and then re installed it from a fresh download.  What do I do???  I desperately need this to work.  Thanks in advance!

Today I installed adobe premiere elements 15. I want to burn a DVD but unfortunately comes the message "no burner available" although I have a Blu-ray burner (LG HL-DT-ST BD-RE BM16NS40) installed. When burning a Blu-ray, the burner is detected.What can I do? I found no help on the Internet. Please help me in simple English words. I thank you in advance.Gernot