Questions

Envio meu projeto para o Media Encoder para exportar e dá esse erro. Já mudei a placa de vídeo de CUDA para Software e não resolveu.Alguém já passou por isso e solucionou o problema que possa me ajudar, por gentileza?

Adobe Media Encoder выдает ошибку: Невозможно записать данные XMP в выходной файл.

We are encountering a glitch in our media output after our recent Premiere Pro CC 2015 Update (installed 12/16/15). The exported media will fill empty audio portions with a repetition of the last 1.5 seconds of audio until a new audio clip in the timeline plays. I am also experiencing the output media with an arbitrary amount of blank footage added at the end. I've checked the timeline to make sure there was not any "straggler" clips hiding at the end. One 10 minute video exported as an hour and a half. We are exporting both through Media Encoder and Premiere.I had exported a 20 minute movie before installing the update on my system into several formats without issue (H.264 MP4, MPEG2 Blu-ray). My co-worker had already installed the update and was encountering these issues exporting the same file. We didn't realize that the update could be the cause. So I installed the update afterward and am now noticing the same issues when I export files. We are both using new 2015 Macs, Yosemite an

I am having a problem with AVCHD frame dimensions that are not being retained in decoded MP4. The resulting MP4 frames are cropped to show a partial image of the original.  I am editing in Premiere Pro CS6 and used HandBrake to decode. I also do not know how to determine if there could be a problem with the frames of the AVCHD format that is responsible when the decoding stops before the decoding process is completed or perhaps the file structure as below.x - Copy.m2tsx. m2tsx.m2ts 48000.cfax.m2ts 48000.pekx.m2ts .modd 

hi everyone, ten days ago updated media encoder. i working on after effect and then open encoder but its not working now. when finished its looks " !" sign can you help me. thank you

When I create a proxy for files from the sequence in which I continue to work, the encoding process stops. I do not find any other way out, except to keep two versions of the Adobe CC programs to get around this problem. I also bypass the restriction of the encoder to encode one task at one time. Any ideas.

I exported this video from After Effects and I named it "planets scene", but didn't pay attention to where I exported it and I can't find it when I search for it. I also didn't save my After Effects project, so I can't export it again. This was a quick effect showcase so I'd have to do it again but it won't look like the tutorial. 😞 Is there an export history or recent exports page or something? because I saw the message that it was exported successfully.  Thank you!

Hello, mostly I encoded my videos by ffmpeg with x265 using CRF methode, with various libx265 parameters for software encoding. Could you put these features for HEVC encoding in the future? 

Why is it so hard to burn a simple DVD with Adobe software? Nothing in intuitive. It seems you can't do it with Premiere and from what I've read you have to use Encore, which doesn't help me because I just purchased the creative cloud suite which includes Media Encoder, not Encore. In fact, I can't find any good training on the Adobe site for Media Encoder. Does this mean I can't burn anything? Please help!

Hi - I have a comp that is 5760 wide x 1080 deep (basically 4 x screen side by side to make a video banner).When I render, I need to render each of the four screens separately - which I can do fine in the queue by adjusting the source left and right positions, then rendering, then readjusting the left and right to the next region for acreen 2 etc etc.  I know that I can set multiple outputs for a watch folder and hoped that I'd be able to set it so that when I drop the comp in, it would render each of the 4 regions ... but although I can see the way to adjust the output settings for each output type, I can't get to the source settings in order to select the left and right position.  Is this possible?ThanksSteve

I want to render a video.Alpha;RGB;Alpha + RGB;I can do in After Effects:How to do this in Adobe Media Encoder?

I am working on a videography project using after effects 23.0 and adobe media encoder 23.1. My PC specs are an intel i7 9700 CPU, Nvidia 3060ti GPU, 32 GB ram, and 2 TB SSD. I'm rendering in adobe media encoder using the h.264 high quality 2160p 4k preset with rendering set at maximum depth and maximum render quality turned on. I have tried purging my after effects cache and media cache database, rendering in all mercury playback engines, and changing encoding settings performance from hardware to software. Nothing works, each time my whole computer will freeze at a random point in the render and the only way I can use my PC is by restarting my computer. This problem has been going on for quite a while now and it is costing me time and money as I am unable to produce videos for my clients. Please help.

Hello,I'd like to know the difference between cropping and scaling a video clip directly on a Premiere Pro timeline, versus doing so in the Adobe Media Encoder export window? I am converting DVDs of VHS source material to H.264 files and want remove the distortion at the bottom (head tearing), and on the sides. I scaled each clip up 104%, which successfully cleaned up the bottom and sides before sending the project to Adobe Media Encoder for export. The 'Source' tab in Adobe Media Encoder has several options for cropping, while the 'Output' tab's 'Scale to Fill' seems to do the same thing as scaling in Premiere. Is there a fundamental difference between doing these operations in a Premiere project versus doing them in Adobe Media Encoder? Thank you,Eric

  hi i got some problems with exporting comp.i would like some help. thank you all

The 2022 and 2023 versions are happening to me. I have a Windows 10 When I'm going to export a video, in Premiere it allows me to use both the hardware option and the software option. But in the media encoder it gives me this message when I try to put the hardware option:"Your system hardware does not support hardware acceleration for current configurations" I really don't understand how it works in premiere and not in media encoder! One method I used to see if it worked was to put these programs on high performance...WindowsSetup>System>Display>Graphics Setup But so far nothing...If anyone has the answer on how to resolve this question it would be a huge help!

Hi!I have encoutered a strange bug on which I can't find any answers on this forum, so I dedided to make this post.I tried to export my project to normal mp4 file from Adobe Animate - as normally as I did for the last few years. Today however the files were exported as empty mp4 files that can't be opened and weigh 24 bytes. There is a notification in Adobe Media Encoder that says "Encoding completed with warnings". I tried rendering the projects to different files and it works normally. It seems as though this is only an issue with mp4 files. I didn't make any updates - which worries me even more. I also did not change any settings, this just happened from day to day. My other projects have the same issue since today. I also have normal mp4 files of the failed project that I rendered today and they all are normal - but rendered day or week ago (I rendered them before to preview project in other software for editing and then decided to add some more things to the project)I have attache

Hello! With Adobe Encoder I am compressing .mpg files to .mp4 (h264). Source data matching but no video and audio sync. Same framerate, same hertz and bit audio.The desynchronization is progressive.I tried instead of choosing .mp4 to make it with .Mov or .Mpeg but I get the same error.With the handbrake software I have no timing issues, but for some reason the resulting files have a frame rate of 24.22 fps instead of the original 25 fps.I need to use Adobe Encoder because I want to join clips directly from there.

Hi,i need to export a video in DCP but i can't find it in Media Encoder 2023 (it was present in the previous Media Encoder versions...). Does anyone know i can export my video in DCP from After effects 2013 or Media encoder 2023?Thanks for your help,

I have not used AME in months until today. I have not even opened it since the 2023 update last week.I was working on a file in After Effects this morning and added it to the AME queue, the splash screen came up and then it froze and the windows "Adobe Media Encoder is not responding" error came up. I closed everything, opened AE again, worked on a few different files and about two hours later tried to export another file, same issue.I closed everything and tried opening AME from Creative Cloud same error. I tried uninstall and reinstall, no dice.I don't have any third-party PlugIns or anything installed other than the original AME installation from CC.I've attached two screenshots. Note that it doesn't always freeze at the same point during loading. Computer specs:2020 Dell Inspiron 3593Windows 10 64-bitIntel Core i7-1065G716GB RAM1TB SSDIntegrated GPU Intel Iris Plus GraphicsDedicated Graphics Card Nvidia GeForce MX230 Thanks peeps.

Im trying to convert about 170 files from MOV to MP4, at first it was going great, the files were converting and everything was fine. But after about 30 files through it started bugging out, giving me that green screen preview that u can see at the bottom, taking forever, and then eventually failing and moving onto the next one, only to do the same thing. Im trying to edit these clips in a software but it also gives me the green screen glitch, then crashes my software (hence why I'm converting them to MP4) so Im used to seeing this green screen effect. But why am I seeing it here in Media Encoder as well? Why are MOV files such a pain? The videos are recorded with an iPhone (which Im never going to do again after this) but it seems like Media Encoder was doing fine for a while, but then just gave up half way through. Ive tried clearing cache, reinstalling, resetting. But nothing works, why can't I convert these MOV files with ease?

Hi, I've been using adobe after effects- and media encoder 2020 for quite some time.. These couple of months though I've experienced that the last frames turn fully white or black. Sometimes the frames are very choppy and laggy. It's just a couple of frames but it can be very annoying when you've worked on a project for a long time and when you render it, it's ugly. This only happens when I put color grading. Another problem is that every once in a while, when I want to continue on my project ae tells me that my file has been corrupted or damaged for no reason. I can play my video normally through other apps but not in ae. 

Does anyone know how to fix this?I Was rendering my edit in media encoder and was waiting for about 30 minutes until I realized that it stops rendering in one specific frame. I Close the media encoder, Restart my computer a bunch of times and it still stops rendering in that one frame. So, before I opened media encoder I check my after effects and search thru that one clip where it stopped rendering. I removed some effects to see if it works, but it still doesn't. I Check the Logs and the errors and it says "12/07/2022 11:00:10 PM : Queue Stopped- Encoding Time: 00:15:0812/07/2022 11:00:10 PM : Encoding Failed" "The Operation was interrupted by user" And so whenever I close the media encoder to restart again, It keeps saying "Media encoder 2020 has stopped responding."Anybody knows how to fix this? 

everytime i open Adobe Media Encoder a messege pops up saying 'Red Giant licensing error'. and then the app doesnt open. anybody else experienced this?

Hi I am trying to adjust the file size in media encounter but now there is no option for adjust the file size.Is that removed?

I just got a 2017 iMac Pro with "3.2 GHz Intel Xeon W" Processor and "Radeon Pro Vega 56 8 GB" GPU with 32GB Ram ( non-upgradable ) .   I call this computer "JP4" My other computer is a 2017 iMac with the "4.2 GHz Intel Core i7" and "Radeon Pro 580 8 GB" 64GB Ram.  I call it "JP2" I had hoped that "JP4" would outperform "JP2" with render times of around 55% based on a quick benchmark test I performed back in late December 2019 against a similar iMac Pro.  That must have been in one of the 2019 versions of Premiere Pro but Im confident that the iMac Pro at the time was out performing "JP2".   But now this iMac Pro I just acquired "JP4" is running anywhere from 20 to 50% slower than my Non-Pro iMac "JP2".  It seems like Adobe Media Encoder is just not running as fast in either the CPU or the GPU when processing Adobe Premiere Pro projects.  The project is in Premiere Pro version 14.4.0. When running a "Unsharp Mask" in fact