Questions

Its' been a looooong time since I've used Flash (now Animate) and I'm having some trouble figuring out how to encode my videos properly without it changing the dimensions of my videos. I've burned about 4 hours trying to figure this out myself... so here I am. Here's what I've done:1. I created two set of short animations in Animate (5 second videos) that are two different sizes (1200x675 and 1440x1080) which I will need in two different formats (mov and mp4).2. Export > Video (all are approx 475mb files before I encode them)3. Then I dragged those .mov files into the Media Encoder queue4. Change format to Quicktime or h.264 (I need some in each format)5. Edit the preset     • uncheck "Export Audio"     • Basic video settings » select Match Source6. Press play.... Here's the problem:1. The videos that I encode as .mov are still 100mb — I believe these come out the correct dimensions.2. And the videos I export as .mp4 come out around

I tried to batch export 12 sequences (6 x :10, 6 x :15) to H.264 and Pro Res, it would export one sequence and stall for the rest.Pause does not work. I tried switching the Renderer to Software Only, deselected "Import Native Sequence from Premiere" = nothing works or changes. I have to "stop" the action and reset the status to try again.  Sometimes it works, sometimes it doesnt but nothing is changing in the source files I use in my sequences or the export file location where I want them to land (main disk on Macbook Pro).  I even updated to latest Media Encoder, same problems. (Because this is a work computer, we dont always update to latest versions unless instructed to do so, for compatiblity with other plugins etc). Premiere 22.1.2 (Build 1)Media Encoder 22.3.1 (Build 2)

When trying to convert VOB files to MP4, Media Encoder only outputs a few seconds of the file.What am I doing wrong?

Been working on some BRAW and SLog3 videos the past week and it is highly disappointing that Media Encoder, for some reason, cannot recreate the exact colors I graded my footage at. I have confirmed that this only happens when a video is rendered in Media Encoder and not Premiere nor After Effects. The temporary solution I have at the moment is to render the videos in-app and basically cripple one computer to render a single project at a time instead of being able to work on another while being rendered in Media Encoder.I hope that there's an actual configuration that needs to be followed because I have not seen a single one yet for the past few days I have been researching this issue.

I have a repetitive problem with sending AE compositions to ME: when I choose Composition -> Add to Adobe Media Encoder Queue (or use keyboard shortcut), the composition does not appear in the ME queue. While:- ME is launched, and if I quit it, repeating the action does launch it again, but the queue remains empty — the sent composition doesn't appear there;- the .aep file is created in the _AME folder of the project folder each time I repeat the action.OS reboot solves the issue for one time: I can render another compostion just once, and then I start havign the problem again.Virtually it makes it impossible to use Media Encoder for After Effects, as each render requires OS reboot. I need to make dozens of them. System details:After Effects 22.0.0Media Encoder 22.0macOS Monterey (12.0.1)MacBook Pro (15-inch, 2018)

I updated my premiere pro, but now whenever I try to open my projects it comes up that my scratch disks are protected, even though nothing has changed. Then when the project finally opens, it says the media is offline but the link media box doesn't pop up. When I try to manually link the media, my external hard drive where the data is located won't open in the app, yet it's fine on my computer. 

When I try to export an audio file (both WAV and MP3) out of ME, and I go to the folder I exported it to, I can't see the edited audio file. It says it's downloaded, but it really hasn't done so. I have no idea why this happens and I'd like some help.

Working on a PC with Windows 10. Due to a problem with using AME in my old CS6 install (it can't connect to Dynamic Link server when trying to load or process PPro CS6 projects) I decided to try Premiere Pro CC on my faster 96GB Threadripper system. If it works, it might be worth a monthly subscription fee. Now, if I try to load any of my PPro CS6 projects, both PPro CC and AME CC crash. These projects load fine into PPro CS6.  This does not pump me full of confidence in spending money every month on a CC subscription. What are my options for troubleshooting this? My only option right now is to render each individual project in a single install of PPro CS6, which will take forever and I'll have to ride shotgun on it to see when one job finishes so I can start up the next. 

NÃO CONSIGO RENDERIZAR MEUS PROJETOS PARA MP4. FICA SÓ CARREGANDO E NÃO SAI DO CANTO. NÃO CONSIGO PENSAR EM UMA SOLUÇÃO PORQUE SOU NOVO UTILIZANDO O MEDIA ENCODER.

For a couple of days ME doesn't seem to be using the acceleration of my 1080 GPU anymore. The projects I create with After Effects have been identical for months and months but when I use ME the time difference is huge.I create musical projects that are sometimes even longer than an hour.Below I leave written the time difference that I have received from 2 days.A 70 minute project ME used me scarce 7 minutes of time now instead it asks me for almost 40.My projects are still image (HD 720p) accompanied by the audio aspect of After Effect and this is the exact same project that I have been using for months.I have not made any changes to my pc I have only updated the Nvidia drivers.Below I also leave written my components of which I work.Intel Core i7-6850k.16 gb ram.GTX 1080.Can anyone help me to solve this problem?I await answers. 

Hey there.My team and I are searching for a compact solution for a big upcoming event.The goal is to stream 1 Signal with only 1 PC to 2 different social media platforms (YouTube and Facebook) at the same time with only 1 software, so it's easier to overview.I'm able to change the different bit rates in FMLE 3.2, does this mean that there is a way to stream so two different FMS URLs?Hope for a quick answer,thanks!Greets from Germany

I'm on a Monterey 12.1 macbook pro I need for work and if I want to make an alpha export it seems impossible on this thing. Is there any fix for this? When I drag he comp into AME I get this:Encoding Failed------------------------------------------------------------Could not read from the source. Please check if it has moved or been deleted. It hasn't been moved or deleted.

hello,I did some composition in AE.Black caption on transparent background. I then export this composition into Adobe Media Encoder.What do I have to do (in AE and in ME) so that the end result is still black caption on transparent background?Thanks for any help!

Background: I edit numerious TV programs and segments to time every week, and sometimes, in a pinch I use Time Tuner. Isssue: Very often, when the Time Tuner effect is applied, audio drops out after the first few minutes of the export. Normally the first 10-20% of the export has audio and it is complete gone from the rest of the export. This seem to happen regardless of the types of media assets or export type. This happens to about 90% of my exports from sequnces using Time Tuner.  I have had this issue on numerious edit machines dating back to when Time Tuner launched in 2015. My current workaround is to export the video without Time Tuner, and then re-export the video with Time Tuner applied, but recently, this has also had the dropped audio after the first few minutes of the export.  Anyone have any suggestions or better workarounds?  Edit systems used:-2019 MacBook Pro: Intel i9, Radeon Pro 560X, macOS 12.0.1, Media Encoder 22.0 -Razen 5900X

I recently updated to the latest versions of AE 18.0 and ME 15.0, running on macOS Big Sur - 11.2.3 and I'm no longer able to export/render via ME, despite trying the below:When clicking the Add to Adobe Media Encoder Queue... it opens up ME but shows nothing in the queue to render.I've also tried adding the comp to ME manually, but that seems to get stuck on Connecting to Dynamic Link server... (See attached) and eventually says Could not read from the source. Please check the settings and try again.Adobe, please can you advise?

I just did a round of updates to Premiere Pro (22.1.2) and Media Encoder (22.1.1). Running on MacOS Monterey 12.1, Intel. All media in my PP sequence is online, but when I export it in AME, certain clips that are ProRes in my sequence are being rendered/exported with the offline graphic. I've deleted the media cache, but that did not help. But oddly if I DO NOT use AME and simply export from PP, it renders and exports correctly.  Anyone else having this issue? Thoughts on how to fix it? Thanks,Dave

When  I try to export my video, its says failed and then gives me this message: - Source File: C:\Users\realf\AppData\Local\Temp\cat disection full.prproj - Output File: C:\Users\realf\Downloads\school\Adobe Premiere Pro Auto-Save\y2mate.com - charlie_schmidts_keyboard_cat_the_original_J---aiyznGQ_360p.wmv - Preset Used: HD 720p 59.94 - Video: 1280x720 (1.0), 59.94 fps, Progressive, 00;27;10;52 - Audio: Windows Media Audio 10 Professional, 44100 Hz, Stereo, 24 bit - Bitrate: VBR, 2 pass Constrained, Avg 5000.00 kbps - Encoding Time: 00:00:0205/01/2019 12:05:13 AM : Encoding Failed-----------------------------------------------------Encode failed because the source duration is nil.-----------------------------------------------------What do i do to fix this?

Hey All,No matter what I do, I cannot get rid of meta data.I've turned metadata off in both the media encoder settings and the Aftercodecs Settings and i'm still getting meta data written into my renders.please see attached imagesHelp would be much appreciate.Cheers.

First time I've used AME 22.3 and I do not like it at all. ME has never been the greatest, but this release is horrid. I have a project that I cannot render whether I use the queue or do a direct export from the project. It hangs with 16 seconds remaining every time. Anyone else experiencing this kind of behavior??

Kinda stupid, but I once put the "don't ask again" option on that pop up appearing when I stop a current queue, I said "finish the current conversion before stopping" and "don't ask again". Now it doesn't ask anymore but it also doesn't finish the current conversion and stops it in the middle. Which is really annoying cause when starting it again, there's another error sayin it can't override the file, even if I asked to override in the options. And so I need to always find that half converted proxy, delete it, and restart the conversion. Any solution on either1) how to find that pop up again ?2) how to successfully override files Thanks !

Hello. Starting two days ago After Effects, Media Encoder, and Premiere will crash without freezing. After Effects and Premiere will close as soon as I attempt to import footage into any project file, Media Encoder will close as soon once it fully opens. Only Media Encoder logs an error in Event Viewer, listed below.. I tried reinstalling and same issue.I also tried downgrading Media Encoder from 22.3 to 15.4.1 and After Effects from 22.3 to 14.4.1. In terms of Premiere, I can make a new project or open a previous. Can create a sequence, can create titles and black video. I have gone so far as to completely reinstalling windows and creative cloud... AME's crash in Event Viewer:Faulting application name: Adobe Media Encoder.exe, version: 22.3.0.64, time stamp: 0x62393561Faulting module name: AdobeXMPFiles.dll, version: 7.1.1.49485, time stamp: 0x612fa056Exception code: 0xc0000409Fault offset: 0x00000000000e955cFaulting process id: 0x32c8Faulting application start time: 0x01d85

I tried download the latest update for Media Encoder and it renders out too many files...  Rendering out mp4 H264 file which in normal.  I also want to FTP it and it all should render out 2 files mp4 and SRT file due to Closed Captioning.  Now it not only renders the mp4 but antoher mp4 with FTP extiontion and Burns the Closed captionion into video.. Its not to do that.  Is the somewhere I can find how to correctly use and or set up this so It only renders mp4 and SRT file and then Transmittis FTP.... thats what I want and need.  Thanks!

My composition in After Effects contains video but when I add it to the Adobe Media Encoder Queue, it shows that it is an audio file. I have no idea why. Help me with this?Thank you.

When I try to import a downloaded YouTube video or movie in .mkv format I get the error message. Some .mp4 files work strangely enough.  

Failed update of After Effects 22.3 and Media Encoder 22.3 slows done and/or does not finnish the rendering, freezes or does not start. Tried small and large files. Worked fine before update..... Any known fixes or ongoing analyzis?