Questions

My computer hard drive froze and was unsavable.  I put in my disc for Audition 3 with all the serial numbers.  Now they won't give my the activation code!  I paid a lot of money and don't have the resources to keep purchasing new, when I on don't need the new stuff.  Audition 3 worked just fine for my purposes.

I'd love to learn to program two separate macro functions for easier beginning and end trimming.1. Delete everything to the left of my cursor selection2. Delete everything to the right of my cursor selectionAny of you already do this? Please let me know. Thanks.

This is super-weird. I cannot save, open, close, or reveal any of the files I have open. I was about to edit a file, decided to load up the last crash and save it. Saved the crash file, but opened a wav next. Now nothing will save. Almost the entire file menu is grayed out. Thought at first it was because the crash was missing files but it still applies to other files I have open. None can be saved. I have never seen this behavior before and I've used Audition since it was a thing.

I am using adobe audition to record, mix/master songs. I got a new plugin from Izotope (Ozone elements 9). I have been working on a session with no issues. Now after a couple of weeks, hen I try to ppen this session, it gives me an issue that reads: "Error: Could not find specified plug-in to open this file." I have tried to uninstall/install Ozone. I have made sure everything is up to date. When I try to open plug-in manager under effects, the whole project freezes and I am forced to restart. Also, when I go to VST3 plugins, I notice that Ozone is there, but it is grayed out.  Can someone please point me in the right direction or give me any ideas on what I can do?  Thank you so much in advanced. 

Hi all, I am relatively new to Audition but was getting on well - until tonight when my playback sound disappeared. I am editing a multitrack where I am cutting, aligning and muting various instrumental tracks to create a good multiplayer sound. I had finished one section and wanted to hear how the whole thing was sounding, but all the levels were really high causing my headphone sound to distort. So I opened the "mixer" window and lowered the overall output level a little. When I went to play again - no sound! I have checked in the forums here and done a general internet search - the two suggestions seem to be to check that the output device is set correctly - it is - and to check the channel mapping is correct - it is too. It is very possible a rookie error where I have accidentally changed a setting or selected a mute somewhere. Does anyone have any suggestions of what I might have done and how to fix it?   Please?? 🙂 Thanks.

Hey everyone. I watched many tutorials on Youtube explaining how to erase noise and clicks in your recording. However, these noises are so extreme that the shown methods didn't work. I guess the mic cable was broken and someone constantly touched it.I wasn't able to erase the clicks completely, just to turn it down a little bit but it was still very present.  The following Youtube video shows my struggle. Can you help me out here? I simply have no idea what I could do to make the best out of it. Thank you!

Hello, I am very new to audition. I am trying to work on some video game sound effects, and timing these effects properly with the animations in my game. I am trying to use the stretch function to shorten a clip from .75 seconds to .6. It sounds fine in the editor, but when it is exported the ouput is .6 seconds of the audio running at its original speed, which cuts the last portion off and doesn't work for me. Is there any way to make the stretch function actually work on an exportable file? Thank you very much for any help, it is so frustrating to try to do something so simple for so long with no luck!

I just subsrcibed Audition CC on WIn10 and this is my first project of mixing songs. I have three tracks in the multitrack view session, one backing music and two voices. They sound good in the multitrack view. I mixed all session into a new file. But the mixed file has only one track of voice. Note I have three output hardware options and they are changed pretty frequently based on how my laptop is connected to. One is System sound from laptop, one is USB Jabra and one is the sound through TV, via HDMI connection.  What can be worng between what I hear in the multitrack and the mixed file? Isn't that should be the same? To make it a little more complicated, I had other cases where the Audition CC can't play all the sound in the mixed file but other software CAN or using a different output hardware! REMEMBER in each case, they all sound perfectly in multitrack view, just the mixed file can't be heard correctly.  

For some reason this option is greyed out now. I use to use it all the time and after I upgraded my pc it started doing this, ive searched and followed some directions i found but to no success. Anyone have any success in a fix for this?

I have set CD tracks by SHIFT+M, but the tracks don't burn to the CD. The resultat is only a Track 1 with the whole file. any ideas?Thanks!

I tried to copy a file .UGG file from my wireless go pro to audition however the file will not play?

Can someone please adress this serious issue? I haven't been able to open Audition for months cause of this.  This is serious! I have deleted and installed this application with the same result. All I get is this error message. W10 is all up to date as usual. I haven't changed anything. This happened after a so called update months ago and it is still not working. I'm seriously considering leaving Adobe.  

what called  this sound effects ???I've been over a year searching about this type of sound effects and i couldn't find any thing similar any one know where can i find specific one like this paid/free ???

Hey Pros! I've got a question. I recorded an interview last week and the gain on my main mic was too high so I got some bad distortions in spots; some I've been able to heal.... others, not so much. My question is, can I use one of the other 2 recordings as a baseline to heal the main audio waves? The subject is too quiet in the other 2 recordings to use without adding noise issues to the mix, but I thought maybe there might be someway to use those wavelengths to fix the badly distorted portions of the main audio. Thanks in advance! 

Hi all!I'm using auditions auto remix function to shorten tracks, which works great for me.But I have the following issue:I use 2 different sources, one track with vocals and one track instrumental. So both tracks are exactly the same, only vocals are removed from one track. I would like to remix both tracks exactly the same way, but the remix function does different things on both..Anyone with a solution? Thanks!

Hi, I'm sure this question has come up loads of times but I can't seem to find an existing thread for it, so I thought I'd ask here.My playack in Audition is terrible. (Sounds like a radio playing under water). I'm not very smart with Audition but I have used it for over a year. I had to stop my subscription for a couple of months but I restarted it again recently (though I can't this would have made any difference with the playback).I am editing some music on it and even the sessions that played back fine before, now play back terribly.It seems to export the track perfectly, but that doesn't help me with editing.All the files were created on Garaeband and exported individually to MP.3, then imported into Audition. As I say, I have been done this many times before over the last year and it has worked fine.I have both changed the sample rate in Audio Hardware preferences and I've changed the bit depth and sample rate in the .sesx file (following advise from a youtube video). U

I have tried reinstalling creative cloud itself and every single application several times, but I don't even get a launch crash. It's as if the launch command isn't even being received. I can't find anything about this specific issue online, only creative cloud crash reports. I did find one post mentioning an accidental quarantine of the program. I have checked my antivirus, and nothing is currently in quarantine. It worked fine the last few times I've used it. I went without touching any CC apps over the summer, and then this happened when I tried to boot it back up. I was hoping it was  an update issue that would be fixed soon, but that doesn't seem to be the case. I've also tried accessing the apps through the adobe website rather than the desktop launcher, and have had the same issues. As far as I can tell, my subscription is still valid. The apps also don't show up on task manager when I attempt to start them.  I anticipate needing this software soon, so i

I'm working on a Mac with Big Sur and a fully updated Adobe Audition. I've notice that when I save a mp3, the Finder shows the file with an incorrect track lenght sometimes. The folder I'm saving to is then on Symbol View with More Info enabled so it shows both the file as a symbol and the length of that mp3 under it. For example, the time there would show as 12:54 while the correct song lenght would be 6:13. This incorrect track length also shows when I open the file in audio players like VLC. When I then start playing it, it resets the track length, showing the (more) correct time in that audio player. What works better is when I use the Export function in Audition instead of the Save As function (while both mp3 export/save settings are the same, so it shouldn't matter). Another thing I noticed: when a folder is in Symbol View and while hovering over music files in that folder, normally a play button appears on that mp3 file's symbol. So you can play that track directly from the

Welcome,I have a problem with Audition on my new computer.After importing the audio file, PLAY does not start - both after pressing the space bar and the PLAY button.The same thing happens with recording - when you press RECORD (red button) absolutely nothing happens ...I installed an older version and it's exactly the same ....Help me please... 

If I load a 5.1-channel track into Audition and export to a 5.1-channel .WAV file, the output has sound only in the from L and R tracks (the other 4 tracks are present but silent).  I can use the panner to direct the source 5.1 channels to other output tracks and that works, but how do I simply turn the panner off?  I just want all the input channels to map as-is to output channels. I'm not trying to modify the surround mix, just do some basic time-line editing of existing 5.1-channel content.  I can do this in Premiere and the straight-through mapping of channels is the default behaviour but in Audition it doesn't even seem to be an option.  Am I missing something obvious in the Audition panner settings or am I stuck with using Premiere?

Hi all,Has anyone had any issues with the Match Loudness setting not working? Sometimes it works and sometimes it doesn't. I've had this issue for several weeks now,any help would be greatly welcomed. Thank you

So my w Edition was running fine and then I got off of it and got back on. Only if now when I pull up a session and try to record instead of showing the large waveform it looks as if it's showing samples or frequencies. I thought this might be a zoom in zoom out type issue so I checked to make sure I wasn't too zoomed in but I'm not and it was still going to go away. Has anyone here had this issue or maybe knows how to switch back to the original wav?  

Hello, I recently recorded two videos that I neglected manually saving. I assume that my computer auto-updated, since it returned to the lockscreen after a period of time. When I returned to Audition, it recovered the two files, but the waveforms are missing from both and it won't play. When I say that it won't play, I mean that audio won't play in my headphones. I tested another audio file and that plays just fine. This one, however, will not playback anything despite the playhead moving. Is there any way I could fix this issue?

How to I get to my saved projects in Audition? I open the app on my Macbook but it take me to a new project each time. How do I access my saved projects?

Hi guys, I was recording a multitrack session with only 2 tracks (musical playback e voice). Everthins wal ok until a export a mixdown file and play it back.It was accelerated, about 20% percent faster, just like "cartoon voice". But, when I playback the session in the timeline, it was ok. So I decided to restar my Macbook and after the restart and opening the session again, the session palyback became faster aswell.I have never had a problem like this. I think I lost the recording material, cause I don't know if there is a way to solve this mess!I appreciate any help. Tks