Questions

Upgrading from Audition 3 to audition CC 2018 was a great move, but I can't find the Dynamic EQ effect on this new version. It was a great tool for me to produce radio imaging and for some music processing. Anyone knows how I can recreate it ow find it?  I would appreciate any help.

Hello,I see that the Frequency Analysis node under the Window tab displays a graph of Frequency (Hz) vs dB. Is there a method on Adobe Audience to change the output so that the graph displays frequency and time (hz, s) instead? For example at 2 seconds into the recording, the frequency is 1kHz. I am trying to import the data points to an Excel spread sheet by copying and pasting "All graph data" from the frequency analysis graph. I am running Audition CS6. Any help is appreciated.Thank you.

audio output occurs when recording, as if direct monitoring is enabled ...I tried to record in Sound Forge - there is no problem.focusrite 2i2 usb.the other day I will try other audio cards in the studio.but why does Sound Forge and CC2017 record without such a glitch?

I'm working on a project that requires 2 microphones, one is a Blue Yeti (USB) and the other is a Neewer NW-800 (XLR to 3.5mm)Both mics work just fine as independent mics under MME, but when i switch to ASIO the Yeti works just fine but the NW-800 will either not pick up audio or it will be incredibly quiet and when boosted its static-y and muffled. is this because ASIO has some issue with 3.5mm mics? would switching to an XLR to USB or using a 3.5 to USB adapter solve this? or is this a software issue?Thanks

Hello, Just started using Audition to do some adr and foley recording for a movie project and so far I think it's great.  I'm wondering if a.) it's recommended that I keep my media on an external hard drive as I would while editing a video project and b.) if my primary temp folder can also be on that same drive.  On that note, what exactly is in the primary temp folder that takes up so much space?  While working today I eventually got a warning message that the folder was almost full.  Sorry if this is a very basic workflow/storage question but I'd like to get things straight before I continue.  In the past I've always used external drives for video media storage but for audio just used the drive on my computer, but it seems like what I've been doing in Audition is taking up a lot of space...thanks,Jimmy

I'm having great difficulty importing my Premiere project into Audition 2018 using the 'Edit in Audition feature.' Specifically, when I send my project with the 'send through dynamic link' option for the video, everything imports correctly, except that the video file is just black. It does show a video file in the video reference track- as it should, but no image.Oddly, this is only with my film project that is about 1:20:00.  Importing smaller projects works just fine so I can only think there is something odd going on with this specific project. I had several clips that were AE comps, but I have since replaced them with a rendered file- eliminating any links to AE.Also, I get one error message during the import regarding an audio level exceeding 15db. I doubt this has anything to do with the video issue. I'm not getting any error message about a video issue.Again, this file works properly in AU, regarding audio- and I can scrub through the tracks normally, but the video is black

I was just wondering if you can still purchase Audition 3.0?

Two different times I have gone to my music files and found them empty.  All that was left was the .wav files that I had started with. What I did find was the Audition CC had stripped twenty five of my music folders and place all of them in a single music file.  I found them by accident.  I ended up with conformed files.  I don't use conformed files for anything and they are now causing problems.  Right now I have about two hundred music folders with 68.4 GB of data. I am not having a problem with storage on my hard drive.  I am running a 2TB hard drive with it about half filled and 8GB of RAM.   How do I prevent this from happening again?  Did I do it?  Can I turn it off?  In other words, what is my problem?  To me it appears of if Audition CC had a hiccup and this is what came out.Jim

Good evening. I just upgraded to Audition CC 2018, and updated my ASIO4ALL driver. When I went to Preferences -> Audio Hardware, the information showed the ASIO driver, the Tascam US-144MKII device, the buffer size (256), and the sample rate (44100). There are no choices for default input or output, etc., like there are when I check the MME, instead of the ASIO driver. When I click the setting button to the right of the device name, a box pops up that says TASCAM, the name of the device, the device driver (2.05, the most recent), and then, where it says "device," it says, "none found." I've tried everything I can think of, to no avail. I can't assign track inputs or outputs to the Tascam device; I can't assign outputs; and when I tried recording with the MME driver, instead of ASIO, the latency was about a day-and-a-half. Has anyone else had this happen, and if so, have you fixed the problem? Thanks.

Hello All,I apologise for asking a question that has already been asked thousands of times already over the internet but I am at a loss.I have a long interview using radio mics and throughout the recording an awful intermittent buzz/frequency/hum can be heard over the voices. I have watched many tutorials about noise/buzz removal using Audition but every time I try to replicate the smooth removal of the problematic buzz, it does not go away at all from my recording. I have tried using noise reduction tools, using the noise print tool, removing certain frequencies from the waveform etc but it's like a wine stain that won't come out.I really would like to know if anyone else could have a go at improving this clip so that I know if I'm either incompetent or alas the recording cannot be saved.Here is a clip with two examples of buzzes over different voices:Buzz over dialogue clip by Pippa Young | Free Listening on SoundCloud I would greatly appreciate if any Audition wizards could help out

When playing back a selected section the playback stops at the end of the section. Fine. But when restarting the playback it starts from the end of the section. How do I make it restart from the beginning of the section? This may seem trivial but is absolutely essential to my use of the software.When playing back a selected section the playback stops at the end of the section. Fine. But when restarting the playback it starts from the end of the section. How do I make it restart from the beginning of the section? This may seem trivial but is absolutely essential to my use of the software.

GUYS PLZ HELP IM MUST KNOW THAT

Hi I am using Audition CC 2018 to do sound design for a film. I have added multiple track effects and clip effects across the project. The most common effect being used is "Full Reverb" as the film takes place in a cave. Till a certain point, the scrubbing wasn't a problem. But now with most of the audio in, it has a seriously long freeze time and scrubbing is impossible. I have switched on the Pre-render option for the tracks that have Full Reverb in it. But still I am facing this issue.

I would appreciate any help trying to figure out what is going on with my new studio. I do voice over work for audio books and e-learning solutions, so need clean, single-track audio of just my voice, which means I can get by with a fairly simple setup. I recently have had to replace my entire recording chain and so am really starting over.Every single recording I make contains electronic "hiss."I'm using an SM7B running through a Cloudlifter CL-1 into a Mackie Onyx Blackjack. Gain on the Blackjack is set around -40db, recording into Audition CC2018 on a MacBook Pro OSX 10.13.1.The SM7B is by nature a very low-power mic, so once the audio is in Audition I have to adjust it which results in the very clear "hiss" running throughout the recording. Using Noise Reduction removes the hiss in more quiet areas but is still discernible in areas with voice. Additionally, the vocal quality is suffering once the hiss has been removed, sounding over processed.Any suggestions?

C'mon guys, you've completely changed the way this works.Previously if you moved the playhead, then pressed play, the playhead would play to the center of the screen before centered scrolling starts. Now the playhead jumps to the center immediately so you can't keep track of where you are. PLEASE CHANGE THIS BACK.In the meantime how do I downgrade to the last version - I can't work with this the way it is.Neil.

It would seem that there should be a way to make shortcuts conform to the same as Premiere Pro. For example, moving a clip a definite distance (frames) Select clip enter + to move the clip forward or backward.  Also, there should be a snap on and off like in Premiere pro to more easily put markers and move the playhead onto a marker.

Hi all,I am in need of some collective expertise/thoughts. I have some live concert audio that was recorded on a new mic that I unfortunately was not able to get familiar with before the shoot and could not monitor the recording through headphones (big drawback of the Sony A6300). While monitoring the levels through the camera's viewfinder, they appeared to be ok, but upon offloading the media I quickly realized the audio sounds quite distorted, despite never clipping.I know there is often not much that can be done to repair distorted audio, but my knowledge here is quite limited. Would love to get some thoughts on whether there is anything I can do to repair this recording. I am not expecting a miracle, but hoping there's a chance for even some improvement here. If you have a few minutes to take a listen, you can find the recording in my Dropbox here: Dropbox - Distorted Audio Sample. Any assistance would be much appreciated.Thank you!Todd

I am a very NEW user of adobe audition.  I am launching a podcast and have done a series of interviews.  I have two tracks for one interview and now want to export the interview into one file.  what do i do? THANK You

Ojala me puedan ayudar.No se escucha y no se puede editar el audio en un video en audition.Este proceso lo así muy bien antes de actualizar al sistemas macOS High Sierra.Gracias.

Ever since I upgraded to High Sierra, the location thats shows in my media browser section changes.  It is defaulting to a folder called 'Audio,".  Each time I record a new audio file, I have to manually navigate back to "desktop," "audio," where the file was recorded to.

Adobe gods -Cakewalk Sonar who is currently owned by Gibson guitars, closed it doors on Black Friday. Adobe needs to buy it, and I am sure it can be had for a song. With a little sparkle around the edges from Adobe's magic wand, Sonar - can become the most creative and graphically exciting Digital Audio Workstation on the planet.You are presently doing Audition, why not take it to the next level and become the authors of a full-fledged DAW.Touch Screen is just getting started, and that's where Adobe can shine. Technically, Sonar is already a solid program, it just needs some good old marketing Buzz, and a little more shake, rattle and roll to place it far above the rest in this galaxy of sound... Call them!Do this!Now!dmc

Hi!I found a question about the topic but maybe enough time is passed, so there is the chance for me to find a people who still managed and solved the problem.I bought Melodyne 4 Essential today. I tried to connect it with Audition CS6. But Audition tells me that there is something wrong. Can anyone help me? Or is there just the chance to use Melodyne as Stand-alone?Thank you Josie

Hi to everyone!There are CDs that are able to store up to 900 MB or 100 minutes of audio. I didn't find a way to brun my recordings to these CDs.Audition just tells me, that I have to reduce the length of my track.Does anybody know a solution?Greetings Moritz

When I run the Match Loudness batch processing in Audition CC, i get at a random error, where  a few of the files are gained to 0 db (empty files) and, other random files will have a volume fade in. I typically batch process 30-100 files, and maybe around 5% of the files are affected. The ones that are gained to 0 dB are pretty easy to spot, but unfortunately not the ones that have a volume fade in. All the files are speech files originally at aroung  -20 to -30 dBLUI am using Adobe CC with these settings.ITU-R BS.1770-3 LoudnessTarget Loudness -16Tolerance: 0.5 dBMax True Peak: -1Lookahead: 12 msRelease: 200

Details:OS 10.12.5MacBook ProAudition 17.1.1 releaseBuild 10.1.1.11I've gone through both Sound Devices' and Adobe troubleshooting guides, have checked and rechecked every possible setting. Is anyone using the USBPre 2 successfully with Audition?Sound from the USBPre 2 comes in fine to my Mac. I can record a voice over to Quicktime and it sounds great. But the signal is not showing up in Audition when I hit the record button. Here are the settings.