Questions

I'm recording using Adobe Audition 23.0.0.54 and a AT2020USB+ microphone. Previously never had issues, but lately Audition is unusable-- upon playback my audio repeats itself or skips, and this is showing up in the waveform as I record I can actually see it record extra audio repeats. Any idea why this is happening? For example, when I simply count to ten it records me saying one, one.... two three.. six, six seven, etc. File attached for reference

 I have been trying to automate tasks in Audition. But I find limitations that prevent me from doing what I need and I have some questions that I would really appreciate if someone could help me with. 1. In After Effects there is an option: app.beginSuppressDialogs()To prevent dialogs from being shown. But I can’t find anything to get that same behaviour in Audition. I get a save window when calling save through code and it stops the process of calling further commands, so not sure how to get around that. 2. ApplicationCommands project under CEP on Github lists commands, are these up to date? Or are there more things that can be done? Does anyone have ideas about this? 

Who do I add a second or two of silence to the end of a track. For example, if it is 5:04, I want to extend it to 5:05 or 5: 06. I am a beginner who has used Audition on and off and this has been an impedment to learning as I will forget how to do something. I used to know how to do it but cannot remember and am having no luck searching around in the program. Thanks.

Hi can anyone help. Ive been editing a clip by using the automatic noise declipper and since then I have no audio whatsoever on that clip but all other clips play fine. It's not just in audition I tried playing that clip in itunes and there is no audio. There is a waveform though so I have no idea whats wrong with it. Screenshot attached

Adobe Audition - Mac When pressing play there is a delay - perhaps 500 milliseconds or so, when using automation. The delay seems to get worse as the project is edited further and becomes more complicated. I found that if I removed the plug-ins from the track, the delay is gone even with automation on.If I remove automation and leave the plug-ins in, thenthe delay is gone as well. So the playhead delay happens when using plug-ins and automation together.Which plug-in does not seem to matter, any of them, Adobe or otherwise cause the problem.This is only a two track edit but often happens using more tracks.Yes, my computer has more than enough power, and yes it happens on other computers under the same parameters. Workaround:My rather convoluted workaround is to create a bus track, install plug-ins on that one and rout the output of the track I am editing to the bus. This seems to work. Does anyone have a fix? I did call Adobe but got the usual unitere

I'm a new Audition user and am looking for good online tutorials. Will a course from 2019 still match the features/interface?   Thanks!  Mark

Randomly I will get Adobe Audition 23.5 stuck on initializing auUI on startup. Somnetimes it work with no problems.Please see log: Log file created: Tue Aug 22 01:36:05 2023-------------------------------------------Ticks = 0 <51201> <AuLog.Startup> <5> Begin startup sequenceTicks = 144 <51201> <AuLog.Startup> <5> Initializing XML LoaderTicks = 147 <51201> <AuLog.Startup> <5> Initializing Application SettingsTicks = 192 <51201> <AuLog.Startup> <5> Application: AuditionTicks = 192 <51201> <AuLog.Startup> <5> Version: 23.5.0Ticks = 192 <51201> <AuLog.Startup> <5> Build: 48Ticks = 195 <51201> <AuLog.Startup> <5> AuUI initialization sequence started...Ticks = 195 <51201> <AuLog.Startup> <5> Initializing Crash RecoveryTicks = 196 <51201> <AuLog.Startup> <5> Initializing dvaaudiodspTicks = 196 <51201> <AuLog.Startup&gt

My GoPro audio waveform looks nothing like my other waveforms, despite being recorded on an external mic. When imported it looks like this:If I slice this at any point, it results in clicking, unlike my waveform from my GH5, for example. But if I apply a simple filter like a high pass, the waveform now looks like this:This results in a much 'cleaner' waveform, visually speaking. It's like it balances the audio along the 0db line, making it easier to edit, and now looks like waveforms from my other sources. How do I achieve this without applying any filters to the waveform? And why does it do this? Why does this waveform look so 'chaotic' on import? I'm sure this is more than just audio quality or noise. The actual audio from the GoPro with the external mic is pretty clean, it's just the visual representation of the waveform that's different, or how it is interpreted by Audition upon import. Possibly. I'd like to understand why this happens. Any pointers are appreciated, thank

hi guys im trying to export multitrack as an entire session but im getting an error. ive tried uninstalling and reinstalling app and that didnt work any ideas? error is on picture

So I have an audio recording for a video. The audio itself is pretty loud, but when I listen to it through apple music (I'm on mac), it's totally fine and isn't distorted. Yet, when I go and put it into Audition and Premiere, it clips and distorts pretty bad, can anyone help me as to why and how to fix it? P.S. I've tried DeClipper, but it makes the audio sound pretty bad.

I just stumbled upon this problem. I changed the tempo to a multitrack session from the Preferences > Time Display. I closed the session and opened another older session, but the playback wasn't right, a bit too slow with a weird delay. I finally figured out it was the tempo change I had made for the other project.  So am I missing something or is the tempo always a global value for every session you have open at the same time and you have to manually set it from the preferences every time you switch between projects and the tempo won't be saved to the project file? This seems very counterintuitive to me.

Hello. I have a question. Can I play a sound in Adobe Audition or other programs? I do not mean to increase the length of the music. Let me explain more: Have you ever watched football? When a player scores a goal, the sports reporter draws some letters of the word "goal". For more excitement, he pronounces it like this: goooooaal Now I want to apply this to another word and draw the parts I want. can I? how about

El audio que grabé no aparece en Audition, solo como tal la barra pero sin ondas de voz. 

Can someone explain how to undo an effect setting ? Let's say I open a new EQ, if I make a setting on it and then try to CTRL+Z it undoes opening the EQ and closes it, instead of undoing the setting I just made What am I doing wrong ? 

I have a video of Arlo Guthrie playing Alice's Restaurant at EPCOT from 2007. The entire thing. It was shot on a Sony HDV camera from the third row. Great stage lighting on him. Unfortunately, the only audio I have was on the camera. The external recorder glitched.I don't know if muddy is the right word, but it just isn't as clear as I would like it to be. It is OK, but could be better. His voice has a bit more bass to it than it should, I think.I have Audition via the Creative Cloud but I don't know where to start. I haven't used it in years for anything other than noise removal. I don't want to publish the video publicly since it would probably get removed for copyright. But if you are an Arlo Guthrie fan and think you might have the skills to tell me how clean it up a bit, I will provide you with a link to it on YouTube. Or should I post a short clip that you can download to see/hear it?I would appreciate any advice you could provide. I will do the work myself if you point me i

I have to edit podcasts that last an hour plus, and so stretched the file to 60%. Then cut down unwanted portions. However upon stretching it back to 100%, all of the clips run into each other. I cannot for the life of me figure out how to tell Adobe "don't overlap clips--have the next clip start at the end of the first clip."  I tried merging the clips and then stretching those proportionally, but the file becomes lower quality.Surely there is some feature to stretch the clips back to 100%, and keep them in order, and *not* have the newly returned 100% clips run over each other in a series of very confusing overlaps which I must now separate one by one, eliminating any time I actually saved by editing the file at 60%?  

Radio broadcaster here, and I need to limit the fields displayed in the cart metadata window to show only important ones for my job (ie. title, artist, category, start/end date). When I uncheck the unnecessary fields in the "metadata panel", they still remain shown in the metadata cart window everytime.I spent a long time fixing this problem earlier, but after having to rollback to an earlier version after the August 23.6 update caused problems, ALL my settings were removed. Any tips?

HiI have a sound track with me speaking to a guitar sound - the guitar is too loud and the voice to low - they are recorded as one track - is there any way possible to lower the guitar and alter the vioce in any way in the program that anyone knows of?Hoping for you guys answers

I don't know why, the amplitude adjuster I usuall see when I select a part of a recording in the edit section (not multitrack) is missing this is what it used to look like....   Now it is gone and can't remember how I got it in the first place here is what I see now   i have clicked Amplitude where i can find it but do not see anyway to get it to be pinned when I select a section or for that matter the whole waveform. Sorry to be such a dork

I want to save a track as a multitrack session in Audition 2023. I have the problem that the audio can be heard in the waveform but not in the multitrack view. In this view, the level change can be seen to the left of the track, but not at the bottom of the level bar. When I want to export the multitrack as an MP3 file, I get a silent file, although the sound for the track as a whole is switched on. It is not muted out. Can anyone help?

Hello,I have a lot of vinyl records and I would to convert them to digital files (mp3 or Wav)I already connect my USB turntable to my computer and open Audition but I'm lost.  What are the next steps please ?

Hi there - I saved my mixdown file that had my audio, music and sound effects by going to File -> export ->multitrack mixdown -> entire session.  I gave it a name and saved it.  I then sent it to someone to review.  A few days later, getting together with that person he listens to the file that I sent him and states that I need to increase my voice since it is somewhat overpowered by the music.How do I recall my mixdown file in Adobe Audition that will show me the audio file in the first track, the music in the second track, etc.  I can't seem to figure out how to recall that file so that all the different sounds show up in the tracks that they were on when I saved it as 'Entire session'.Thank you!

I need a little help community. I'm going to try to put this as clear as I can, I'm not super tech savvy but I can definitely manage, As of now I've been trying to record clear audio vocals on Audition but it's just not clear, I've used adobe audition since Cool edit pro days so I have a lot of experience using and navigating the program. So pretty much if I'm just listening to my mic checks (saying 1,2,3 testing stuff like that) that audio sounds perfectly clear, if I record and play it back it sounds muffled and nowhere near as clear at all. im using a laptop - predator Acer Helios 300 (6 months old)microphone AKG C214 (2 weeks old)and a Yamaha audio gram 6 - USB interface. (3 years old)I replaced all the cables but the audio still sounds the same, if It helps I used a new Scarlett foucusrite interface after I could not get clear audio with the Yamaha and it sounds exactly the same, I also swapped to 3 different condenser microphones and the quality sounds identical, little to n

My keyboard shortcuts window is so out of proportion that i can not save new presets... i can't shove it up to press save either, because it autocenters the window , what am i doing wrong ?i Press Alt+K, the keyboard shortcuts windows opens, but for me it is only visible to the 'Undo' button, and nothing seems to help to resize it... i even tried to adjust the screen resolution, anyone experienced this before or got a tip on what to do ?

In the last 4 months I've had some eye damage and I'm now blind in my left eye.   My right eye is not focussing as well as it should and these days I find the UI on the Audition interface is difficult to use -   grey text on dark grey background is difficult for me to start with, but the font size is far too small and i have to use a hand-held magnifier  and get my face about 5cm from my high res screen to read filenames and times, panel headings,   preferences options,  etc or I start making mistakes. Almost every other software on earth that's of any merit allows users to edit the UI parameters to suit their needs,  except I can't find how I can do this with Audition.  (I'm using the latest version,    Build 14.0.0.36)    This is also part of the anti-discrimination law in many occupations here in Australia.   As my initial change I'd like to change the font colour to white instead of grey and increa