Questions

Hi. This is my problem.  Track 1, voiceover. Track 2, FX.  Sometimes, when the sound of the FX kicks in (a broken glass, for instance), it ducks the voiceover slightly. What am I doing wrong? I have not defined ducking parameters or anything else, for that matter.  Thanx!

So, as the title of this post says, I'm having a lot of difficulty getting Adobe Audition to even find my Rode NT1-A microphone as a means of recording audio. I'm an aspiring actor, with a specific interest in video games/animation etc. and right now, I'm looking to just start recording, doing impressions and getting comfortable with using my equipment and the software itself. I'm using a MacBook Air to run Audition, with a Focusrite Scarlett Solo 2i2 (3rd Gen) preamplifier and it's plugged into my MacBook via a USB adapter. I've made sure to allow my laptop to let Audition record audio, too. Can anyone potentially offer any help? I'm finding it very frustrating, as I've searched for resolutions to this problem and have been completely unsuccessful at every turn. Thank you in advance. 

請問我該如何製作出爛得像一堆屎的開頭音效讓開車和工作的人受到驚嚇以得到關注範例：近期 Adobe Acrobat.com 的Youtube廣告

What vocal effects are used in this video? how to apply the vocal effect?https://www.youtube.com/watch?v=HTxIM14wiHs

Long-time Adobe CC user here. Today I recorded an important interview, and at the end of the recording session, Audition wouldn't allow me to SAVE THE SESSION because my bank had detected a possible fraud issue yesterday and put a temporary hold on the card I have on file. For clarity, instead of emailing me about the issue, the software prevented me from saving important audio until I entered new payment information. My feature suggestion is to leave vital Audition functions intact and email someone if/when their payment method fails. My question is, has anyone else experienced this, and were you able to find a way to save your project? If a customer doesn't have an alternate form of payment handy it could become a real problem. Thanks!

Can anyone tell me if there is a way to connect my Akai EWI5000 (electronic wind instrument) to Adobe Audition (22.6.0.66), in order to record with it, on Windows 10, please?I have connected the EWI to the PC, via the USB port and it is being recognised as a microphone. But, no sound input is visible on the track meter, when I play it.Any suggestion about what interface I might need to add, or settings changes I need to make would be very welcome.Thank you. Stephen

Hey all, I produce a podcast that has a significant amount of editing work. It's part history, part fictional so lots of SFX, bits, character work, etc. We're adding video to the show and I'm looking to see if I can take my finished Audition project and match all my cuts & edits to a video track in Premiere. Doing all my cuts in Premiere first and then going into audition to do the rest would effectively double my work time, so I was hoping there was some automated sync that takes the video track and automatically cuts it wherever I already cut the audio. Admittedly probably a miracle ask, but hoping someone has an idea!

Hi guys I've got an issue where my izotope plugins won't show in adobe effects. I see them on the scanning plugins window but then they don't show up to use. Anyone know why this is? 

This will probably just muddy the waters, and it's gonna be short...but I feel impelled to say something. I have cs6 creative suite. I also use resolve. I have a laptop with internet connection. I have editing computer system with NO LAN... no internet. I have microft OS on both. The laptop gets forced to update stuff on occassion. The edit computer is in it's own world. When I use audition on laptop I only have MME as a choice now. No longer ASIO is an option. I have no clue why. If I put sound file into audition on laptop it often does nothing and I have to go into preferences and choose EXACTLY THE SAME settings I have (MME, realtec, speakers, etc.) and miraculously it now WORKS. I have no idea what's going on. The only difference is the laptop is online, and the edit computer is offline. So I suspect the problem is with the OS upgrades and some confusion regarding the focus of audition to SEE the specs it is supposed to see. The edit computer doesn't have this problem. Like I said,

Incredibly frustrating problem. The Rode microphone I'd like to use works perfectly in the Microsoft in built voice recorder but not in Audition. Checked preferences etc but nothing works that I can see. Is this yet another argument between Adobe and another tech company?

He perdido el pequeño potenciometro que aparece encima de la ventana (un círculo pequeñito) No sé como restaurarlo. El problema no es de adobe, es que tengo 75 años y me encuetro un pco perdido. el problema es mío. Algo he hecho mal ¡Soy Novato! Agradecido si podeis ayudarme.

In Audition... when playing back mix, regardless of where I start to playback, about 2:20 minutes in white noise swells up on Left audio track, and stays on until I pause or stop song. Pressing play again... the white noise comes back around 2:20 minutes. I have listened to this mix once with no noise, several times with it only at the end of the 40 minutes mix, and now I'm getting the noise everytime. See quick video for example... Thanks! Audition White Noise Issue  Audition 2023 / Build 23.0.0.54iMac 2017 Intel, Ventura 13.0.1

Dear community, hello everyone! I make screencasts. My problem — lots of usless words, like hmmm, ommm, aaaaa, and long silent pauses. I need to remove all this trash from my video with related video section. That's why "remove silence" doesn't fit for this case (it will mistime audio and video flows)Hope such a tool exists and some kind one will show me how it works. Thank you and have a great day:)

Hello, I often use marks when working on my rushes. But if I cut some part of the audio file, in multitrack view, the marks are moving, they don't stay at the place I 've choosen on the audio but they are stuck to the time in the time line. Is there another way to deal with marks ? Thank you !

After updating Audition, I can no longer select one channel by itself in waveform mode.  Both channels have an L and R icon, and when I click them, the color of the waveform changes slightly, but not as it used to do. Previously, I could just click the icon to deselect a channel. That no longer works. The color changes, but if I edit, it edits both channels.   How do I turn off a channel now? Why is there an L and R at the end of both channels?    

Hello forum! Where can I find a more technically detailed explanation of the following amplitude statistics items: Dynamic RangeDynamic Range UsedMaximum and minimum RMS amplitude Also, ALL of the RMS settings options (window width specially) The information and explanations I find in the "help" really don't tell me much. For example, the "windows" used for the RMS statistics overlap? If so, by how much? Which is the default value for this setting? For which values a window is considered to be "wide" or "narrow"?I have analyzed audio programs with excessive "treatment" for loudness (dynamic range compression, common in pop music) which show dynamic range statistics comparable to programs which are not processed for loudness (for example pieces of classical music). I set the window width as recommended by Adobe (wide for wide dynamic range and narrow for narrow dynamic range) and obtained the results found in the attached screen capture. I find it hard to b

Hallo,  Ich suche dringend Hilfe. Ich arbeite normalerweise mit zwei USB-Mikros und Audition für ein Interviewformat. Jetzt wollte ich ein drittes Mikro für eine weitere Person hinzufügen.Habe alles beim Mac über das Audio-MIDI-Setup eingerichtet und Audition zeigt auch alle drei Mikros an! Nur schlägt kein einziges aus, wenn man auf R drückt. Wenn ich das dritte wieder entferne, funktionieren die anderen beiden wieder ganz normal. Es ist auch alles in Takt, Mikros, Adapter etc. Ich denke irgendwo bei Audition muss es ein Problem geben, da alles andere tadellos einzeln funktioniert. 

Hi - I'm new to Audition and I had it all working well two days ago with my Presonus io24 interface and Heil PR 40 microphone. I recorded in Audition and it played back well. Now --- the recording seems to work well -- but when I play back the file, I get an echo-y distorted playback on that file. I've checked EDIT and PREFERENCES and everything seems to be chosen correctly re equipment. I'd appreciate any help. THANKS

What steps are involved to change a man's voice to a female's?Can you do them in audition?I believe merely changing the pitch or EQ is not enough. I want to make short videos with female voice over but I prefer to do the voice over myself for more control, and then change it to a female voice. I want the female voice to sound real.

I'm working on a large dialogue project with 14,000 individual voice prompts.  I'm marking each prompt as a marker region and then exporting. When I open a file and I stopped on lets say 450, pressing M creates a marker labeled 1. So I have to press M 450 times if I want my next region to be 451. Soon I'll be working on a file that starts at number 1,000. Is there really no way to ask the markers to start at 1,000? Pressing the M key 1,000 times seems crazy. And even more crazy when i start to get up to the higher thousands. I could always just ignore the numbers, but that's a great way to get lost since the numbers won't match up. This seems like it should be simple, but I can't find an answer. 

I'd like to ask if there's any solution to removing great fMRI noise, just to hear a clearer bisyllabic words.I am new to Adobe Audition, and I have tried methods like Paintbrush selection and Learn Sound Model, but to no avail...See if there's any Audio Masters who can solve this issue!I'm attaching my audio sound file below. Thanks in advance!

Hi everyone, I'm new to Adobe Audition.I currently got seven multitrack sessions of different audio recordings I've already cut, edited and categorized.Now I wanted to put some snippets of them in another multitrack together. Turns out (since I got the recordings from different people) some of them are 48 kHz and others are 44.1 kHz.  So when I try to copy and paste a clip in the new multitrack session with another sample rate, I get the error message “the sample rate of one or more clips does not match the sample rate of the session. These clips will not be inserted." So my question is, how can i put clips with different sample rates together in a multitrack session?I know I should have fixed this before editing, but is there a way to convert them without doing the editing-work all over again? Thank you for your helpTamara(Btw please excuse language mistakes, english is not my native language)

Mac OS 10.15.7Audition 2022Problem has only recently started ... after opening a session (any session) I get trhe rainbow wheel of death and it doesn't go away. Tried uninstalling and reinstalling and deteting cache files. Any thoughts?

I have tried and tried but voice is still coming through as musical notes rather than clear speech. First four minutes  and 20 seconds of this very long file is attached.  If anyone could tell me a process Or chain of processes to clean the entire file it would be extremely helpful. Please help!

I want to make a recording in Audition via Session Link. Record and everything works, the only problem is that the speaker is delayed hearing himself unless I mute the track I record with, but then I don't hear the person anymore. Is there a function how I can mute the track but still hear them?