Questions

Hey! I have stereo mix enabled, selected and mapped, but wheen I record it doesn't capture any sound. Microphones work fine. I'm stumped! Any help? Screenshots of main interface and settings below  

Hi, I was working on a multitrack podcast when I encountered a unique problem I haven't seen anyone have an issue with yet (or maybe I'm just bad at searching for discussions).My typical workflow is to go through each track and apply a suitable autogate before putting it through the delete silence program, saving me tons of time. However, as I was in the middle of one of my tracks, an error came up saying audition was finding it difficult to read or write from the drive I have for projects and that it's recommended I save and restart Audition. So I did that, I saved everything and restarted audition. When I came back though, I could see the waveforms for the track I was working on, I wasn't even able to apply the autogate before I had to restart, but now I can't hear it. Notice how in the image, all the tracks have audio except for the first one. I've had it where they all make audio and I just can't hear it, but I've never had it just straight up not make any audio, especially for a s

Audition 22.6.0.66 on Windows: I enjoy using Alt+Scroll to zoom in and out of the timeline. When zoomed in the playhead moves quickly so zoom out while listening. When I hear a problem, I want to quickly zoom in so I can find it while it's still in view on the timeline. Unfortunately, after I use Alt+Scroll to zoom in, I find that the window has been deselected and instead of pausing, spacebar pulls up a windows menu (restore, move, size, minimize, etc.). I have to remember to pause, select the window, then select the point where I think I saw the problem. Then zoom in. By this point I don't have an intuitive notion of the point in the timeline that I'm looking for. Is this just something that I need to practice or is there a better way? Should I change the hotkey to not use Alt+Scroll?

Hi Everyone, Can anyone help or explain this to me? When I see tutorials on using the Parametric EQ the display shows the frequency analasys in the background, but when I use it it does not.I've searched for a reason why or if there is a setting to turn this on, but I can't find anything.The seperate Frequency Analyser window works just fine. Thanks,Phil

Hello there! So i have a podcast and i normally record using Podbean to record and upload my podcast. Podbean only accepts M4a format but i recently started using audition to record my podcast audio and when i go to export it I'm not sure how to export it aim that M4a format or how to get it from audition into podbean so i can upload  into my podcast. I really need help with figuring all this stuff out. This is my first time using audition and i really want to keep using it for my audio because i love it so much! Can someone please help me out?! Thank you! 

Good morning everyone, I was wondering if it's possible to insert a crossfade of a default length on every cut in a mulit-track sequence? For context, my client likes to work in Descript, so I've been using the feature to chop out ums and ahs before exporting to Audition. This works fairly well but often requires inserting a cross fade on many hudreds of cuts to smooth it out. If there was a way to apply one to each cut, this would save a significant amount of time, though I'm not holding my breath. Many thanks in advance,Jack

I pressed something editing my timeline and now everything is greyed out. I've tried everything to get it back to ungrey and but can't seem to find the right key or combination. I've tried googling and searching these forums and nothing is coming up. Any ideas? 

Hi, I have a strange problem that just started. I'm using the latest version of Audition that I just installed last week on my PC (Windows 11).  When recording in Multitrack editor, everything works fine.  However, when recording a single track using the Waveform view editor, time goes bonkers. It skips about .8s at a time, stalls, then skips, then stalls. In 10 seconds, the recording time only shows like 0:02:23. And even w/ no sounds, the levels are moving up and down (just to like  -51dB). When I stop recording, it automatically gets selected (what I last recorded).  If I switch to Multitrack, everything works fine. No skipping, etc.  I tried reseting Audition using the "Shift Key" trick ... didn't help. Any clues on how to fix it?  Thanks!

Auditon audio disabled when using Windows 11

I'm still using CS6...wondering if there is a way to choose MP3 as a default format instead of always defaulting to WAV? Any help is appreciated!

Hi all, I'm relatively new to Audition (a print journalist who has moved into radio work) and I'm cutting up some interviews for the sound designer on a radio documentary I'm working on.  For some reason, Audition seems to keep saving new versions of a file as I'm working on it and making/saving changes. See pic attached. I did not create/name these files, just the original. Whether I'm saving or it's auto-saving, it creates a new file and adds the latest number at the end. Is there any way to stop this? I have updated to the lastest version. Perhaps there is a simple fix but I have not found it through searching the most obvious terms.  Thanks, Lenny  

I'm trying to deliver a master output to a digtial aggragrator. I need to export a 8 channel audio master. Per the QC dept. it should be 8 total tracks. A1 to A6 should be 5.1 and A7 and A8 should be stereo. I have output test clips, but the QCdept says they are only seen 6 tracks of audio. I was just reading I might need to create a new sequence with 8 tracks of audio. Six tracks being mono and Two tracks being stereo.Does this make senese to anyone?  Any suggestions on how to setup this master output sequence? Testing all sorts of things at the moment. Thank you all in advance. 

Hi everyone, sorry if this has been asked before but I can't find what I need. I have been asked by my work to make a Behringer X-Touch One work with either Premiere or Audition.I'm not that familiar with MIDI or setting up controllers but so far I have managed to get it to do basic things like play, pause and scrub in the timeline.What I am specifically trying to do is adjust audio levels in the timeline and have keyframes set as I go. Basically sit with my finger on the fader and move it up and down to adjust the volume and have those levels applied to the audio. Ending in result like shown in the picture I will attach.Does anyone have any advice?Thanks in advance Dale  

I just started learning Adobe Audition can someone please explain to me what exactly is "normalize" ?  

I am working with a stereo file in which the 2 channels are slightly out of phase.  Thus, I need to move 1 of the channels to correct this. Do I need to do this in the multitrack editor?  It seems as though I can create 2 stereo channels, each with only 1 of the 2 channels and then slide one in the multitrack editor and then mixdown the entire session. Is this the correct way to do this? 

Can anyone tell me if it is possible to put more than one function on a single key? I had that and when I upgraded somehow it did not appear anymore.  When I try to put more than one command on one key, it says it already has a function.  Thanking you in advance, Kendal

OK, I am aware from reading through the posts that the spectral pitch display is considered "useless" for editing. I'm not here to debate that. My research area involves deep learning models for sounds - and while working on something else I noticed for a particular data set that when I displayed samples from different categories using the spectral pitch display there were striking differences. When I switched to the spectral frequency display the difference between categories remained but were far less pronounced.  The short version is that I can use these difference to build more accurate deep learning models, IF I knew the specific algorithms used to produce the displays. I can't find that in the documentation which honestly surprised me. If anyone from Adobe happens to review these posts and can provide that information I would be very grateful. Thanks!

Which of Adobe's program would I use to edit audio and also insert video and still graphics? Audition or Premiere?

Hi there, For some reason I keep finding phrases in my narration being cut short. eg if it was that last phrase it might just sound like  'my narration being c/'   and the rest of the phrase has gone.Any ideas? it is costing me a lot of time in rerecording sections. 

Actualmente tengo Audition. Lo quería cancelar, pero me sale más caro hacerlo que mantenerlo, como debo de pagarlo por un año completo, desde ya quiero evitar que mi plan se renueve automáticamente por otro año más, busque por toda la página y no he encontrado la manera de hacerlo. Necesito ayuda urgentemente.

I have a stereo file, and all I need to do is make what is currently the right channel the left channel and vice-versa. I can't seem to find a way to do that, between Audition's effects and the Waves Gold plugins I have. any ideas? Thanks!

Hello everyone, I am new to audition and am liking it thus far. I bought a VST Plugin called Waves tunes vocal pitch correction and am unable to use it as I keep getting an error saying that the Rewire plugin is not working properly. This plugin was included and installed into Audition when I used the FX manager utility but it does not seem to be working. I have not been able to find any related info on the web or youtube related to this issue. Any help with this issue is appreciated as I am bumbed that I cannot use the Waves Tunes plugin because of this dependancy on Rewire. Thanks.

I encountered a bit of a problem with Audition recently. I'll outline what happened: Having recorded some material, I saved as normal, but got an error about not being able to write xmp (marker info) to the file - which is odd in itself since I had no markers. After having done some editing, then saved a new version of the file, I found that a whole section of it was corrupted, the audio being replaced by a series of loud "ticks". I then noticed that, if i have two files open, the cursor position was not remembered when switching from one file to the other, also if I had a section highlighted in one file, switched to the second file, then switched back, the highlighted seciton would be in a different position. I decided to uninstall/re-install Audition (CC2019). On a fresh install, the problem went away. However, once I had re-impoted my preferences and settings the problem came back. In the end, I narrowed it down to the ApplicationSettings.xml file being the

Hi, can this program also generate an mp3 music track in picture? I need the music spectrum image

Oi, alguém sabe se é possível exportar um espectro musical como uma imagem para eu abrir em qq outro programa como Photoshop, Illustrator!?