Questions

bonjour  a toussur la derniére mise a jour photoshop  les masquages rapide camera raw 16.3 ciel sujet etc etc n'apparaissent pas lorsque j'ouvre mon image et si j'ouvre à nouveau l'image dans camera raw ils ne sont pas  mémorisé non plus

Hi there!My Camera Raw Filter doesn´t work in PS. I don´t see any GPU in Photoshop "Preferences" - "Camera RAW".There is just a notification - "Camera Raw graphics accelerator is not supported by your system."  But there is my NVIDIA GeForce RTX 2070 in Photoshop "Preferences" - "Performance" visible.  This method doesn't work because Photoshop crashes every time, I launch Camera RAW Filter. Go to the following locationsC:\Users\<Username>\AppData\Roaming\Adobe\CameraRawRename the GPU folder as 'GPU.old' (add .old at the end)Restart Photoshop and Camera Raw again.  MY SYSTEM: Operating System: Windows 11 64-bitAdobe Photoshop Version: 25.5.0 2024Camera Raw (Version 16.2.0.1763) GPU 01: NVIDIA GeForce RTX 2070, 8GBGPU 02:  Intel(R) UHD Graphics 630RAM 64Gb  I also added some screenshots here.Could you advise any decision of this problem? Thank you!Best wishes

After ACR 16 & Br 14, I am getting almost always out-of-memory errors, and then GPU gets disabled. I need to restart Br. System and GPU RAM are 24GB and 8GB.  A very unreasonable situation... Any ideas? 

BonjourDepuis quelques jours lorsque j'essaie d'ouvrir mes RAWs depuis l'explorateur Windows ou depuis photoshop j'ai des problèmes.Caméra Raw ne s'ouvre pas et Photoshop se bloque.De même si j'essaie d'utilisé le filtre camera raw depuis photo shopC'est des extention traditionnelles CR2 et CR3.Malgrès pas mal de recherche je n'ai paqs trouvé la solution.J'ai réinstaller la dernière version de photoshop et de caméra Raw mais c'est toujours pareil.Merci pour votre aideJe suis sou Win11 et avec la dernière version photo shop et caméra raw

Select a photo from Bridge and open it in Camera RAW.Apply a mask to the photo.Selecting a point color in a mask becomes unstable and freezes.   Windows Update, graphics driver is the latest version. (Geforce 1060)   This phenomenon does not occur on Windows 11.   Windows10 , Camera RAW 16.3 , Bridge14.1 , Photoshop 25.9　（Japanese Ver.）

Halloso I'm writing here again "grrr" that something doesn't work after the update. With the Adobe Camera Raw plugin I switched between the current and original settings using the shortcut "\" - suddenly it doesn't work. and I didn't change anything!I also don't understand why the " § "  and " ¨ "key closes the entire camera raw window without saving anything or asking if I really want to cancel the edits! I would really cancel this feature! if he accidentally hits this key, when he has almost everything colored and edited, he can go straight to commit suic*de, because he will throw away maybe 5 hours of editing! In conclusion, I would like to add that adobe is currently very close to giving up on you and moving on to a competitor! I really don't want to pay you for this! adobe bridge is slow in recent updates! adobe premiere also slows down after the latest updates, plus pointless modifications to the functionality and thus the ACR plugin!these are my three mo

Hi,Using LRT Timelapse, which relies on DNG converter, I have a problem with one of my lenses. The lens profile of the  Lumix S20-60mm doesn't get applied within DNG Converter, however, it works fine in LR Classic. As a result I get quite a bit of distortion and vignetting in LRT.All other lenses seem to work wtih LRT & DNG Converter, just not that one. Any idea or is that a bug that can be fixed?Thanks,Peter

Watch attached video in ACR and Photoshop curve points disappear if you drag curve point with mouse outside window and release mouse button while its outside.      Photoshop 25.4GPU Acceleration enabled in full

更新版 camera ram v16.3 限制裁切 不能使用

Every so often, someone reports that they have a major problem with some important set of images because a beta or technical preview feature messed things up. This is a gentle reminder to all that "important image" and "beta build" do not go together. If you're going to work with a technical preview or beta feature, always do that with copies or throwaway test images, never with actual working files. No matter how exciting or useful or game-changing an early-access feature looks, unexpected things do happen.   Always have a backup, and a backup plan. Never trust production work to beta software.

When I edit a photo in Photoshop for the first time, Camera Raw works properly. When I want to open it again, I get strange colors in the picture and Camera Raw won't open. Does anyone have an idea for a solution ? PS 25.7.0 CR 16.2.1.1767 win10

After updating ACR to 16.3, open the program, select the brush in the mask in ACR. We create a mask and acr hangs safely. The second window (alt+tab) is the Adobe report, but you can’t switch to it, just like anywhere else. Even in the task manager via ctrl+alt+del. Only logout and loss of all work I did for about 6 hours.  Than I delete the acr user profile (in appdata) -work again - the same story. Reinstall acr, along with all applications from cc. Be clean all the Adobe settings in the appdata. Launch it, we work - we also freeze when working with masks.I'd download previous one - 16,2, from https://adobe-camera-raw.ru.uptodown.com/windows/download/124946969 and my problem was solved. All program freezes have disappeared.My OS/hw: win10 21h2 ltsc/i7-12700K/RTX 4070 EAGLE OC 12G/Kingston FURY Beast Black [KF556C36BBEK2-32] 32 ГБ/about 400 GB freespace on ssd one.

Hi guys, Recently shot with FUJI GFX 100S with the usual option of lossless compression in 14bit (worked before withe the GFX 100 and the .RAF files cannot be read/ previewed in bridge let alone opened in photoshop through Camera Raw (yes everything is up to date) Any thoughts or successfull work arounds would be greatly appreciated!

I am working with some 360º panoramic images.  They all have the <GPano> metadata tags in them so that Camera RAW will recognize that they are 360 images and perform Edge Aware filters on them.  This all works fine.  However, if I Save the file(s) as JPEG directly from the CameraRAW dialog in Photoshop by clicking the Save Image button in the upper-right corner, the resulting saved file will be stripped of the <GPano> metadata and therefore will not be recognized as a 360 panorama anywhere else that I use it (Facebook, Google Photos, etc.). But... if instead of saving the image directly in the Camera RAW dialog I Open it into Photoshop then there I can save the file as a JPEG (after converting it from 16-bit to 8-bit) and the <GPano> metadata is preserved correctly. So, the bug is that Camera RAW is not including the <GPano> metadata from the original .dng files when it saves JPEGs.  But opening it into Photoshop and saving from the

I have just purchased Elements 2024 and installed Camera Raw 16.0. Now every time that Camera Raw opens I have to click the Basic option to make adjustments to my image. I have never had to do this in previous versions of this software as the drop down list was always displayed. There does not seem to be a way to force the Basic drop down list to be permanently displayed, which it always was in previous versions. Clicking the Help button is useless as it just opens an error page.

Can someone please explain to me how to add the hidden sliders in ACR 12?  I see comments that to add the missing detail masking slider, you have to go to hidden panels and enable them, but I can't figure out how you find the hidden panels or sliders menus?  Is that through bridge or photoshop?  I use CC.

Camera raw when opening raw files cuts the edges. These are images that other products handle properly! Can anyone tell me how to fix this? I installed the new version of Photoshop and the problem remained

Why can:t I transfer CR3 Files to Photoshop Elements 2022

Adjunto reporte de error después de ejecutar el plugin "Photoshop user diagnostics" Photoshop Error informationCode: -1Text: porque ha habido un error de programaMessage: No se ha podido cumplir porque ha habido un error de programa.Stack:Adobe Photoshop 25.6.0 20240312.r.433 2bfcbf1 - x860 address: 00007FF7E1721342 base: 00007FF7DB2C0000 module name: 'Photoshop.exe' symbol info: 'dunamis_http_setSendRequestCallback:-1 in n.a.'1 address: 00007FF7E171B27D base: 00007FF7DB2C0000 module name: 'Photoshop.exe' symbol info: 'dunamis_http_setSendRequestCallback:-1 in n.a.'2 address: 00007FF7E00AF371 base: 00007FF7DB2C0000 module name: 'Photoshop.exe' symbol info: '?createHttpTransferClient@ACPLHttpTransferClientFactory@net@local@acp@@SA?AV?$shared_ptr@VIACPLHttpTransferClient@net@local@acp@@@std@@W4HttpEngineType@234@V?$shared_ptr@VIACPLHttpTransferCallbackHook@net@local@acp@@@6@V?$shared_ptr@VIACPLHttpTransferRetryPolicy@net@local@acp@@@6@AEBUHttpEngineConfiguration@IACPLHttpTransferCli

Amount slider in Masking doesn't update the picture when moving too fast, while holding down left mouse button. Windows 10, x64, ACR 16.2.1.1767 / PHSP 25.6.0 20240312.r.433 2bfcbf1 x64 Resetting the Camera Raw preferences made no difference. I was able to reproduce this issue on a different Windows 10 machine, ACR 16.2.0.1763 / PHSP 25.5.0 20240214.r.375 Steps to reproduce:Create any mask (let's say radial), set exposure to -1, Feather 0 for better visibility.The Amount slider should be in the "100" position.Click and hold the Amount slider. Move the mouse pointer fast to the left. Don't release the mouse button. The slider position reads "0" but the mask effect is still visible. Release the mouse button - the mask effect updates on the image. The same goes for fast movements to the right (beyond the "200" position).You have to move the slider really fast to see this issue. Expected behavior: the mask effect visible on the photo should be consta

Desktop: CPU Type 16-Core AMD Ryzen 9 5950X, 4625 MHz (46.25 x 100)GPU: nVIDIA GeForce RTX 3070 Ti Founders EditionRAM: Total 130977 MBUsed 22675 MBFree 108302 MBUtilization 17 %OS: Win 10When running Photoshop, processing in ACR, Task Manager shows no GPU usage. In ACR, GPU is set to "Custom" with all the boxes ticked. ACR Cache is set at 200 GB on an NVME drive.Is this normal?Thanks!-DanPS/ACR are current versions. nVIDIA driver is the studio version, current. 

Hi,Several times now my camera raw app totally locks up when I click on the Masking Tool (the round brush circle icon).  The basic tab page works fine.  The minute I click on the Masking Tool, the pop up appears over my photo "Important Masking Changes" - picture of the cute little fox.  From that point it completely locks up, I have to go to Task Manager and have it stopped.  I'm working on all the lastest versions, including CR V.15.5.  How can I avoid getting the pop up ad?  

Hi all. I don’t know if this is a bug or a feature, but if in curves I move a point to the very top of the coordinate plane, then it runs to the value 255/255.I was attaching an example video that demonstrates the behavior of the program.acr 16.1.0.1728. You can, of course, move a point from the keyboard, but this is not always convenient, since the science of programming is not yet so perfect that a point can be moved exactly diagonally from the keyboard, and not just vertically and horizontally. Maybe in 10 years such a keyboard shortcut will be invented. Well, in general, sometimes it’s convenient to move the point with the mouse cursor.

My workflow is to browse my camera files (raw) in Bridge, "Open with camera raw" them with ACR and do some editiing, and the press OPEN button to open the file in Photoshop. But for several weeks, maybe even months, when I press the OPEN button in ACR nothing happens. What uesed to happen was that Photoshop launched and the image was passed from ACR to Photoshop. Now I press DONE in ACR and then lanuch Photoshop manually, then from Bridge I select my file and "Open" from Bridge which in turn launches Photoshop and the launches ACR and then the OPEN button will pass the file to Photshop.It is s sublte difference, but a built-in habit for me. If I "Open with camera raw" from Bridge then ACR is launched from Bridge and Photoshop is not launched, not resident in memory. If I "Open" from Bridge then Photoshop launches in the background and ACR is spawned from Photoshop.Have I got this right? Anyone noticing this change? Did I do something stupid (wouldn't be the first time)?I just checked a

Hello,I am hoping that someone can help me solve this problem. The Camera Raw Interface is too large to fit on my Dell 15" screen. I have searched the forums, tried adjusting the display interface, and I am still not having any luck adjusting the size of the interface. This is what it looks like. Can anyone help me here?