Questions

Is it possible when creating a responsive project to add a PHONE gesture menu for the students to view before continuing on with their content?I know that I could simply screenshot the image on my phone and add it as my first slide but I was wondering if there was anything built into the software that shows them a little more "in your face" than the small icon that appears before they play the project on their phone. Thanks. 

How do you get captivate to pronounce Greek letters and Roman numerals?  I tried to modify the dictionary:   Here I am trying to get it to pronounce linearity correctly.  When I try to save it, it will not let me save it.   Why?    Is this the right way to do it?  I am using neo speech Julie.  There are a few words it does not pronounce correctly like linearity, but I also need greek letters and roman numerals also. I have captivate 11.5.5.676. 

Hello, We ar currently working on a Software Simulation exercise in which the learner has to enter and then re-enter numbers into Captivate text entry boxes. The TEBs are singular elements in the file, nothing is copy/paste. We put the simulations into Storyline and publish. When running on Edge, the first TEB works fine, but the next captivate slide has the second TEB and when you type the first number the whole number pops up underneath, so oyu can select it instead of typing it, autofill style. We have mutliple of these try it exercises and if you go through them all, the values from the previous try its are displayed in a list underneath the TEB elements. We do not want this to happen, we want everything to always be blank, with no suggestions so the learner has to enter manually every time with no help.

In my Captivate project I have 5 "pretest" multiple choice questions. Then I have drag/drop and fill-in-the-blank questions in the middle. Those questions all work as intended. Now I am creating one multiple choice question slide at the very end of my Captivate project, and it is not working as intended. This is what I did:I added 1 graded multiple choice slide.In the "Quiz" tab, I enable: Captions > Correct; Buttons > Back; Buttons > Skip; On Success > Continue; Infinite attempts; Retry message; Failure Messages > None. In each multiple choice answer choice, I copied and pasted text from my other questions such that the font and colors match. When I publish my project and test this slide, I select the correct answer choice and click "Submit". The text that says "Correct - click anywhere or press 'y' to continue" does NOT appear. Nothing pops up, and the next slide is shown after ~1 second. I am pretty sure that I have this question set up exactly the same

Hello, I am semi new to Adobe and I am having a slight problem and wondering if I could get some help. Once my project reaches the very last slide the playbar at the bottom wont go to the end. Any reason why or is it something in my settings?

I have Captivate 9, and when I publish to the executable format, it looks  for Flash, and obviously cannot open.  How can I publish a course to be reviewed by my client without publishing  to an LMS?

Hi everybody, I need help with Adobe Captivate. I created a quiz (Scorm) and this scorm is embedded in a learning program in crossknowledge with some videos (iframe). The problem is, once the user has finished the quiz it doesn't appear as finished in the crossknowledge program. So a user can do the whole program, all videos are shown as "done" but not the quiz. I tried with Scorm 2004 and scorm 1.2 and different settings, but nothing works. One quiz is just a prequiz to find out the adapted learning program, another one is a final test where people need to achieve 80% to succeed. So I have different types of quizzes and different settings, but none is shown as "done" in the learning program. Anybody any idea what I should do? I don't know much about Captivate so every hint would be helpful. Thanks in advance! 

Hi-- Does Captivate 2019 (11.5.1.499) automatically call LMSFinish in the API when the SCO is closed or it's finished or do I need to trigger it somehow? I've just finished a SCO and I never saw the LMSFinish function called. Thank you!/kevin

I have lot old cp fles. pls let me know how we can open and pulish old cp files sonce old cp files are not supported Flash with windows 10 browsers.Thanks & Regards,Dileep

So i have a few content carousels, and inevitably i have issues with attaching audio to the states. If I have 10 states, one of them will play the volume lower than all the rest. Removing and adding the audio again does not fix it. In fact, normally it moves the low volume to a different state but the original state starts working properly.  Has anyone else experienced this, and is there a solution. 

Hi. All of a sudden I am unabl to edit audio in Adobe Audition. I used ot be able to go to Audio > Edit > Project, an then click on "Adobe Audition" and the entire audio file for the project would open in Audition. But now, Audition opens but the audio is not imported. I am able to go to the library and individually open each audio file by slide but I do not like this work around. I am using Adobe Captivate 9.0.0.223 and Audition 13.0.13.46 and Windows 10. Thanks!

I want Captivate to generate random numbers for 2 variables when the user enters a question slide. Then Captivate will plug the 2 variables in to an equation and get a number answer. I want the user to type a number in a fill-in-the-blank space. Finally, I want Captivate to accept an answer within +/-5% of the correct answer. Is this possible to do in Captivate?

I have an advanced action I want to use on multiple with javascript and toggle a variable. The script works fine if I use it in an advanced action. The script shows and hides images in a string based on what is clicked for a visual aid I am working on. I won't pretend to be any good at JavaScript since I have no formal education in writing code of any form. Perhaps that plays a part in this issue. I can save the advanced action as a shared action. When I try to add the shared action to a button and open the properties window, the shared action window does not allow me to change the variable, Captivate locks up and doesn't allow me to closes the shared action window. If I make multiple buttons with individual advanced actions, it works with no problems.  var mods = window.cpAPIInterface.getVariableValue("modulesQty")+1; //number of objects + 1 var firstmod = 0; var secondmod = 0; var firstfull = 0; //first module broken was found == 1 function ResetIssue() { //hide

Hey Guys, I'm back with another question for the multiple training courses I have been tasked with designing. Currently when a user fails and clicks next on the results page this is what happens: IF cpQuizInfoAttempts is equal to one 1; ACTION jump to slide 1; ELSE jump to slide 21 (which is a you failed noticed and instructions on next steps) It has now been asked that when a user fails a second time that they would be able to go back and review the quiz itself. Its important training so they need 100% however, we dont want to give them the answers for the 2nd attempt. How can we inable quiz review for after the second fail? We don't care at this point about them seeing the answers as any further attempts would be with a "teacher". The only work around that I have currently found would be to manually recreate the quiz with the answers and an explanation but I would like to just do that within the quiz itself if possible.

Can anyone help. I am trying to creat vertical text boxes so that the user has  tabs to click on to find out what the content of that area is. the general design is abit like the spines of books leaning against each other.

Hi! I just created an assessment in Captivate but for some reason I can't find the timing alternative for success/failure captions. For now they are about 3 seconds but I would like to decide the timing of it myself. Is this not possible in 2019 or in an assessment? /P  

I am previewing a course and noticed that while I click on the Forward button on the play for my first four slides (to skip listening to the entire narration) when I get to the fifth slide the Forward button won't advance the course. I can't go forward until the narration is done. I can't find anything in the slide narration, the timeline or with any of the objects on the screen that is causing this. Note that I have a button set up on the master slide to pause the project until the user clicks.  Any help on why I can't advance this slide would be appreciated. Thanks!

Hi, is it possible to change the project size of the asset projects? They all come in the same project size 1024x627, but I would like to change them to 1920x1080. How can I do that without completely messing up the layout?Thanks a lot in advance, Nina

Hi All,I could not update my Captivate and I just uninstall. Now I want to download and install it again but somehow I cannot. I have an enterprise account. I log in to my account and click download, it took me to Creative Cloud, but unfortunately, there is no Captivate! How can I download and install it? 

Hello. I am starting an interactive project with breakpoints. I want to control the height of the slide and give it more height each time. But I see that from approximately 2500px the page (white area) is lost below the Cp area.The height of a project of these characteristics has a height limit ?.Thanks

Hi everyone,I am trying to embed a vimeo video using the interactive video feature. When I do I have 2 issues.1. the video quality of the first 5 or so seconds is terrible and then eventually corrects. I placed a 10 second slide before the video hoping it would preload and play correctly. It does not help at all.2. The vimeo play bar is not visible on publish.  In this case it is not critical because i am using a custom play/pause button but i may want the vimeo playbar in the future.thank much Kurt

On a Drag and Drop question slide and under Drag and Drop > Actions, there are options to add and "Undo" and "Reset" button. But there is no option to add a "Skip" button as you can with normal question slides.How can I add a "Skip" button for a Drag and Drop question? Am I stuck with trying to exactly recreate the font/style of the "Submit" button in order to have a consistent "Skip" button?

Our company is moving from network drives to Google drive and we have teammembers that have huge personal drives because of Adobe Captivate Cached Projects. Is there a safe way to move the Adobe Captivate Cached Projects content from their personal drive to company Google drive without causing issues with the courses being damaged or deleted? Please advise. Thanks,

We use Captivate 2019On the last slide in the action "onEnter" we use JavaScript to send data to our system.This script:SCORM_objAPI.LMSSetValue("cmi.suspend_data", "123");instead of "123" we send result of test to our system. But, when we start test second time - it is not work. It looks like pause on the first or second slide and nothing else. When we use previous versoin of Captivate this Script successfully worked fine. Now this script works too, but we don't have opportunity to do test next time. This situation happen in cloud and in our local system. So, my question is, how to use "cmi.suspend_data" in our test without crashing all the test on the second start. Maybe there is some examples?

Hello,I've been out of the production world for a while. I need software with the interactive qualities of Encore, Macromedia Director or DVD Studio Pro. The plan is to make a touch screen display for a mueum on a 60 inch, portrait mode monitor with 4k video. Siimply a motion menu with 6 buttons and 3 of them play full screen, life-sized, portrait video clips.The other 3 buttons go to static pages. Is the video driver in Captivate strong and responsive enough? Will it handle 4k in portrait mode?Another person suggested using Unity but I'd rather use Adobe. This would been a piece of cake in Encore with 720 x 486 video. Any suggestions for other software?Thank you