Questions

There is hardly any documentation about Client.prototype.FCPublish on adobe . I have added Client.prototype.FCPublish on server side application when I call it using nc.call("FCUnpublish", streamName); I dont get anything . There is alert after nc.call("FCUnpublish", streamName); which doest show up . Am I doing it wrong ?

For some experiments i would to know if it exists a way to replace the protocol tcp with udp on http dynamic streaming of flash media server.is it possible to replace udp or at least,could i cancel the ack of tcp?if it's the case , how?

Hi,I have a Problem with the new AMS 5.I use origin/edge option. But when i view a live stream over the edge server it starts buffering after ~2 minutes. Then it bufferes every 10 seconds. Can i solve this problem somehow? I didnt change much in config, just the origin/edge configurations.I used FMS 3.5 before with same servers etc. and same config (just origin/edge configuration changed on blank 3.5) and everything works fine, only the origin server freezes when a huge amount of viewers watch live streams. So i have to restart FMS and it works again. I think thats because FMS 3.5 is just 32bit so i wanted to update to AMS 5. But now there are the problems with buffering. Hope someone can help me or give me hints.Thanks in advance !

I'm currently developing an app that requires video conferencing for iOS. I've used a fairly basic approach with Flex that streams the camera and microphone on H.264 with Speex to FMS. It does actually produce a stream but I pressume the quality is so increadibly bad because iOS does not officially support RTMP but instead requires HTTP Live Streaming (HLS). Thus I have a few questions because there is meant to be reasonable FMS support for iOS.1) Is it possible to convert the camera/mic stream directly to HLS in Flex?2) Is it possible to at least convert the audio stream to AAC where FMS can then do the work of converting the H.264/AAC stream with livepkgr to HLS for recieving on iOS.3) If not where should I look for information on streaming from iOS in general to FMS?Thanks

Hi guys,As I remember, Adobe had one flash player that can show current video bitrate on a graph which is really useful when you want to show people how smooth FMS works when it switch between different bitrates. I want that player. Thanks a lot.

I am running a very low volume (3-4 simulaneous users) video chat application on FMS version 4 and am seeing the following error generated from FMS (Core) about once or twice a week.Message callback is not set.Any idea what the cause of this might be and whether or not it is impacting anything?Additional information from the event log is as follows....Log Name:      ApplicationSource:        FMS (Core)Date:          1/12/2012 9:07:28 AMEvent ID:      1531Task Category: (263)Level:         ErrorKeywords:      ClassicUser:          N/AComputer:      TACVID01.cyracom.comDescription:Message callback is not set.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>  &nb

Hello,I created an Adobe Media Server and placed a video in the correct folder for video on demand media streaming.   I can open this stream through the test player on the server.   I am wondering what steps I have to take in order to allow users on our network to connect to the stream.On a clients machine, I will type in http://<serverIPaddress/hds-vod/test1.mp4.f4m in to the address bar, but an error message will appear saying "access denied" or other coding error messages.   Is this possible to stream the media through Internet Explorer or Google Chrome?

  I got hamachi for now but when i get on laptop it connects to the site but said it cant connect to the Network to watch videos i added.When i installed the media server it did ask which ip to bind to and i chose hamachi as i want to test befor i put online but even when i did that i can only run my content on host pc and not client pc.   How do i change that and right now i am not able to portforward, Are there any work arounds for that?I dont get the instructions for the Documentation for setting ip's and access,   Can anyone help me?Almost forgot,   I am running Adobe Media server 5 but believe it is the Extended version, dont remember. Not sure if there are any differances between the two.

Does anyone know how to use this? It seems like the most unhelpful, least easy to use tool ever.

Since they are both performing real time video broacast and able to see computer or in phone app, then what is the benefit of AMS this is case? ICyrus

After cpompleteing the purchace of FMS hosted on AWS I did not recieve any instructionb email on how to setup this application on an existing instance or better yet create a new instance dedicated to the FMS.I got as far as generating the key after purchase , however when I click go to app.... the link simply takes me to the Adobe / Amazon promo page for hosted FMS.Can anyone help????Thank You!A howto would be great!

Can anyone tell me what the maximum size of a remote shared object is.  I know local shared objects are limired to 100kb but I am concerned with remote shared objects on Adobe Media Server.  I am currently using version 4.0.

Safari / Mac / RTMP => OKAny Browser else / Mac / RTMP => OKSafari / Win / RTMP => OKAny Browser else / Win / RTMP => OKSafari / Mac / RTMPT => KOAny Browser else / Mac / RTMPT => OKSafari / Win / RTMPT => OKAny Browser else / Win / RTMPT => OKAny Idea ?

I need to create a P2P real-time communication video application with flash or Air, the following is my problem:1, the FMS needs to be placed in the enterprise network, NAT, firewall and other network limit, I need the inside client can create P2P connection with another inside client, and can also do this with an outside client , I head that flashPlayer have to open 1024-65535 UDP port for rtmfp connection? We are not allowed to open all these ports.2, I need to record local video and the video on RTMFP, or record local video at one end, with the audio mixing recording of the rtmfp audio , is that possible???Anyone help,THX

Will FMS 4.5 interactive server run on Windows 2012 server instead of the recommended Windows 2008 R2?Using Windows 2012 we can use 2 NIC's teamed together to get 2Gbps instead of 1Gbps with a single NIC. We cannot team in Windows 2008 R2 - it's not built into the OS.Thanks,Dave

Hi,I've set up VOD streaming solution with 1 origin and 3 edge servers, all on AMS 5.0.1, the problem I have is that I get poor streaming performance.Once more than 200 users come online the performance imeddiately becomes sluggish, there is a lag in Video seek and buffering.The problem seems to be in the edge servers. If I take one of the edge out of Load Balancer and access directly (only me, no other users accessing it) everything is fine and quick. Also if I restart the Edge for 2-3 hours it work ok. (CPU load is only 1% when the sluggish performance begins and it never goes up).I've modified following lines in my config from default values:in fms.ini I've set:SERVER.FLVCACHE_MAXSIZE=10240in Application.xml I've set:<Process>    <Scope></Scope>    <Distribute numprocs="3">inst</Distribute>    <LifeTime>      <RollOver></RollOver>      <Ma

Hi.We are currently having issues with users experiencing buffering on a cluster hosting thousands of files with content which is usually streamed by separate users (ie. 1 user, 1 file). The 64-bit Windows servers have had their FLV cache size maxed out to match the available memory in the servers. We have 1 origin to 5 edge servers.Each edge server has     28G RAM     FusionIO 300GB SSD for disk cache      Dual Quad Core CPUs with HyperThreading enabled (we see no cpu issues)We are not seeing disk queues on the origin and network connections are not maxed out either.There are no buffering issues on clusters hosting only the "popular content" watched by many concurrent users so it is suspected that the problem lies with the caching mechanism or configuration of this within FMS but we are not certain of it.Has anyone had a similar but now solved issue?Thanks!

I have to build up a solution where patients, doctors and other staffer members can comunication with each other either through video, audio or through messages. I know how to communicate through video or audio using fms. But i am not clear how it integrates with an xmpp server.It is possible to manage user list, his status and call establishment through FMS using remote method invocation but why there is common practice to use xmpp server for that?If we use xmpp server and fms, will user connects in both xmpp server and fms or when user tries a video / audio call?Which part is handled by which server? e.g list managment, chatting, call establishment ?I don't know in detail about the xmpp server but  i know that it is a common practice to use this server for bulding messenger service.  If any one knows about any googd article on fms and xmpp integration that will be very helpfull.

i'm currently running multi bit rate perfectly fine... But.. I can't remember how to change it to single bit rate.  On the Adobe encoder I deselected all but one video bitrate.  I took the %i out of the stream url.  What else do I need to do differently for single bit rate?  Also, shouldn't I move the manifest files for aren't those created automatically with single bit rate?  ALso, does the player code change?

Hi. Can I use f4fpackager to generate PHDS packages. The parameters of f4fpackager seem support Adobe Access only. I'm using AMS 5 Starter Edition for test purpose.

We are using PHDS streams with an OSMF based player.all streams that are received via RTMP have no problemwith our player in regarding to showing the subtitles (closed captions)in sync.yet when we get the stream via PHDS it seems that once ina seek or two, the captions (subtitles) shift ahead for about 0.5-1 secs.and as mentioned another seek can fix it or leave it out of sync.our conclusion is that it has to do with the FMS serving thestream which somehow deviates the current time of the stream.ps: when getting the stream for the same video via RTMPvia the same player - the subtitles are OK, the problem is only PHDSoriented.any ideas?thanks.

Is there any kind of paid support available from adobe ? Have been working for like 6 months with server applications and sometimes its really hard to figure out things from documentation.

We have multiple multicast servers . I want to rollback from one multicast server to another when a failure occurs . We are using IP Multicast , Is there any way to know when a multicat stream fails ? Which status will I be getting when a stream fails ?  I think there is no way to detect when an IP Multicast stream fails ?

Helloi have a web internet live cams aplication and i am using adobe media server 5most of my users using regular pc computer with common windows web browserbut around quarter of my users using web browser on mobile devicesso i need to broadcast from the same web cam at the same time in parallelboth to pc windows web browsers and mobile web browsers.The important point is to pc windows web browsers i need to broadcastusing only rmtp (http live streaming is not Considerble...)and to mobile web browsers using http live streamingSo the question is what is the best way to broadcast live from the same web camat the same time in parallel in those to methods?is it possible in one net conection or i must open one for each?is it to one livepkgr apliction or each methodis to different madia server aplication?thankscheinan

Hi, I have installed trial of adobe media server on my system. Everything is working fine but the live stremaing is not accessable from other computers on the network.Do I need to change somthing in the settings.Thanks,