Questions

I run two  different video cameras; a Cannon Vixa and a Go Pro.  Does Premeire Elements sync both cameras footage using the audio like Premiere Pro?  Or is there another way to sync both camera footage?  Looking for a new editing software and I do not want to pay a monthly fee as I only make one or two videos a year.ThanksAaron

Hi,I changed my monitor from a 1K to a 4K one (3.840 x 2.160) - wonderful to work with it, BUT:All the characters in the menue bars and windows of Premiere Elements 11 are now very small (nearly impossible to read).How can I change the size of it ?To make the hole display size bigger is not a solution because of too large size of other applications.Thanks for your help, Wolfgang

Blackmagicdesign社のIntensity Shuttle for USB 3.0 は、プレミアエレメンツ 19 でのビデオキャプチャーに対応していますか？

Hello - I've searched and found time-lapse for virtually every other version except 2019 *which I just installed. In my previous version (2018), if I want to make a time lapse from a series of still photos, it was easy.Go to Add MediaFind the files and "select numbered stills"The program gathered all of the stills into a mini movie and allowed me to import them as one fileWith 2019, everything goes fine until I get to importing, they insist on importing them into my computer and after importing they are added to a new project as single photos and I cannot find out how to fix this. Very frustrating since I tend to make a lot of these little time-lapse movies and it used to be so easy.

Hi...I am recording narration the way I always have, but all of a sudden I am getting an echo in my narration.I typically have the 'mute audio while recording' box checked, but out of curiosity tried it both ways today and get the very same echo.I am using a clip microphone, which I have used successfully for the past 6 months. I can't figure out what I might have done to cause the echo...any suggestions on where to start looking?Thanks in Advance.Lynn ps...if  could figure out how to attach the audio clip, I will.

sirs:I bought a new laptop ASUS about a year ago. I noticed  that first time I tried to make a DVD with Premiere 13 it failed. Got to 99% and fail to make the DVD. But later with different video it burned successful.. I did not take the laptop back because it start working making DVDs. But last month it started again. It also had problems recognizing large files. It took the laptop back for service. I was convinced that I Had a problem. Service said I needed a hard drive replacement. So they did. I loaded Premiere 13 back into the laptop. First Premiere failed to recognize the DVD drive. Well, service re entered the graphic Card. That worked. The software recognized the DVD Drive. I tried to burn a DVD. It got up to 99% then fail to complete the process. After about 2 hours of them trying different things, they told me that they did all they could to. Contact Adobe Premiere. I tinkered a little. I found a video file about 15 seconds. I put it in the AP13 software. I made a data (M

PE14.1 on a desktop PC running MS-WIN7.When I insert a photo into the timeline and select Clip / Scale to Frame Size the entire photo appearswith black bars to the left and right due to the aspect ratio.  Thus what I want to do is to zoom intothe image (& maybe move left/right & up/down) until the frame is filled.The only way I have found to date is to use the Pan & Zoom tool, select the part of the photoI want in the first focus frame and then deleting the second focus frame (which is present by default).Is this the correct way?  Using Pan & Zoom seems rather like using a sledgehammer to crackthe proverbial nut but so far I have no other solution.

Premiere Elements 2019 is giving me a message "This type of file is not supported, or the required codec is not installed" when I try to upload my GoPro Hero 7 Black files shot in 4k 60fps.  What are the solutions so I can edit my video files?  Using Handbrake to change the codec is time consuming.  Is there a better fix so I don't have to process all my new videos?  Any help in this matter is greatly appreciated.

Internal speaker on MAC will not play narrations on timeline using Premiere elements

Hallo, ich habe Premiere Elements 2019. nun meine frage: warum kann man nicht in einem Clip zwei Gesichter mit der Effektmaske unkenntlich machen?nun meine zweite Frage:  warum kann man nicht gleichzeitig mehrere ausgewählte Clips zusammen, die Verwacklungsreduzierung anwenden?

I have purchased Adobe Premiere Elements 2019, But it won't Download on my Mac. I have taken the necessary steps to update, install creative cloud, I have sufficient storage and I have spoken with support over the phone who sent me a link to download a version of Premiere Elements 2019 that still WON'T work on my MAC. Since I have already purchased the software am I able to just get Premiere Elements 2019 as I know that will for sure work?

Is there a way to change the default text setting so you do not have to change them each time you add a title.These are the settings I would like.

Premiere Elements 12:Nach problemloser Fertigstellung diverser Filme - trat plötzlich bei den letzten beiden Filmen beim Abspielen auf einem großen Bidschirm leichtes Flimmern,damit Unschärfe, auf . Gespeichert wurde auf PC,externer Festplatte .Was kann das Problem sein - an Einstellungen zu früher wurde nichts verändert.                                                         Chris

Hi, I have a very odd situation where I have installed Premiere Elements 2018 on my Dell XPS15 laptop with Intel i7-6700 HQ CPU @ 2.60 GHz, 16 GB RAM, OS Windows 10 Home, 64 bit.  For my home set up, I use a Dell D3100 Dock and connect both the laptop and a Dell P2415Q monitor and use the separate monitor as my primary display.  Both displays have a resolution of 3840 x 2160, the laptop display refreshes at 59 Hz and the Dell monitor at 30 Hz.  The laptop monitor is connected to Intel HD Graphics 530 and I also have Nvidia GeForce GTX960M (not sure if this is too much info but not sure what is relevant).When I am at home, I can open Elements without issue, add media and play that media in elements before making any adjustments with the external Dell monitor as primary display.  I can even drag the entire Elements window over onto the laptop monitor and continue to play the media.  The programme will also close without a problem.The issue arises when I am away f

Je rencontre un bug avec Adobe Premiere Elements 2018 qui provient sans doute de l'effet "réduction du tremblement" et je ne sais comment m'en sortir. Mon projet est terminé mais il est impossible de le finaliser en l'exportant. Ce message d'erreur apparaît à chaque fois que je retente la manœuvre:"! Le processus Réduction du tremblement est en cours ou a rencontré une erreur.  Redémarrez l'exportation un fois la progression terminée ou résolvez le problème et réessayez."Il faut préciser que cet effet ne concerne que 2 petites séquences du projet et qu'il est intégrer et terminé depuis plusieurs jours. J'ai essayer de le supprimer puis ai enregistrer le projet sous un autre nom. Chacun des 2 projets (avec ou sans effet) provoque le même message.Que faire, aidez-moi!Ceci ne marche pas pour moi: Exportation de vidéo impossible | Réduction du tremblement en cours

Hi,I wonder if I might be leaving out a step when I try to combine 2 parts of a video into 1 screen. From what I’ve read, I align them 1 on top of the other. I then highlight the top one, and choose the “crop” function from the Effects menu on the bottom (close to the right) border (I have Elements 14.) I am then, thru the controls and the motion tool, able to arrange how I want each part to appear. I don’t hit any button, such as “OK” or “accept” at this point.However, when I look at the video, there are often a lot of frozen frames on 1 or both parts, esp the one that I had carried the Crop tool to. I have seen the “render” tool right there on the screen, and have tried this—since it says it smooths things out. This usually helps, though I still  get some freezing. Am I missing something?Thanks.LNovik

When I try to add text it blocks out it's own frame(s) creating a gap and does not appear on the actual video.  How do I do that?

I opened a previously produced and recorded show and it opened fine.  A few minutes later when I tried to open the show again  Premiere Elements 15 shut down immediately.  I have three shows experiencing the same issue. All other shows I've produced open up fine.  I'm preparing to upgrade to Premiere Elements 2019 and I want to make sure all previously produced shows open up.  For some reason, I have three shows that will not  open even though the previously did.  Thanks

hi guy can anyone make a short video on adding freeze frame to motion title background cause when i try i keep getting black screen and refresh it does not work

Can Adobe Premiere Elements 2018 use the Nvidia GeForce GTX 760 GPU.I am running on a windows 10 version 1803 system with     intel i7-5820 CPU (6 cores)     Nvidia GeForce GTX 760When I am editing and rendering the CPU is doing all the work.Is there a way to get the GPU to share the load?

Hello,When I'm trying to set the motion title's background to a different opacity, I only see "select Background from monitor to enable Background editing."It's the same when trying to change the Graphics. What does this mean and how can I fix this? Thanks for your help!

When I try to create a narration it comes back through the speakers while I'm talking.  Hearing myself on a 3 second delay screws my mind up and I have to stop narrating.  How do I disable this playback?

Hi - I am doing some zooming in on videos, and inadvertently added an extra focus frame to my clip.Now I cannot remove it. Yes, I tried delete, control delete, x, etc, and there is no way to delete it.Any suggestions, or is this a bug/missing feature? It is a giant pain in the you-know-what.Windows 64-bit - Windows 10 in case you're wondering.Thanks to all in advance.

I would like to have a video play full screen for a time then while it continues playing have the frame shrink to half screen so I can place some text in the newly vacated part of the screen.  Possible ?I have Premiere Elements 15.