Substance 3D Painter

Hiwhat is the soultion for seams in the normal maps which are extracted from the zbrush to the substance painter.

I have a human model that UV unwrapped and uses a UDIM system. Nomal painting works absolutely fine. The issue arises when I tried (perhaps in a less than ideal workflow) to add skin details like pores usng perlin noise. The steps I took:1. Created a fill layer with only the normal channel activated.2. Added a white mask and added a 3D perlin noise fractal to the normal slot.3. Model now suddenly has weird coloration and lighting that is different between UV islands.I baked mesh maps within substance before starting the paint process, and I'm working in DirectX for Unreal engine support. I've attached a short clip that shows everything. (If embed isn't showing, here's the link -https://youtu.be/QlelVoUfdxY)Maybe I'm doing something wrong. All I really want to do is add skin details. I'd appreaciate any feedback on this matter. Thanks!

I have been using the substance painter 3D application for years. I just bought a new PC and upgraded my teacher's license. I downloaded version 8.3, worked for a couple of hours and then couldn't open it again.I get stuck in the startup splahs with a blank screen.I have tried previous versions and the same thing happens to me.

já fiz o donwload do Substance e quando clico para abrir ele inicia e depois fecha em segundos de forma automatica  

After finishing texturing I noticed that 99% of my height and normal modifications were being drawn on this weird combo height + normal + mesh channel and when I exported the textures my normal and height maps are completely flat. Is it possible to transfer this channel to correspondings ones or do I have to do heights and normals from scratch

Hi!im a little freaked out right now, I'm working on my Thesis Film and have a majority of my  Substance Painter files on a drive but left 2 files on my computers downloads( careless I know). I hadn't touched either of them in a few days since my semester just started and when I check one of them (a texture of a knight) last night it was no where to be found. It wasn't in any of my files or from what I know it wasn't renamed or moved( and no one has access to my computer except me ). I checked Substances autosaves in its files and I have one save from that project but it was before a bunch of hand done embossing. The other file is completely fine but I don't know what to do. Yes I can spend some time redoing it but I'm just wondering where it could've possibly gone???Thanks.

 When painting in photoshop, I always create a new temporary layer to paint on so that my base layer won't get messed up as I work on a new part of the picture. Once that part looks good, I merge it down with my base layer. (I do this hundreds of times, so I have to merge them, otherwise I'd be left with hundreds of layers) How do I merge layers this way in substance painter? Or, if merging layers is not possible, is there a way to use this workflow in substance painter in any other way?

I am using a Wacom tablet with a pen instead of a mouse. I have my pen's 2 buttons bound to modifier keys within Wacom's software and never had any issues with it in any other software, but in SP it seems to bug out and cause the modifier inputs to be unresponsive/not being recognized.I have to either press the same button on my pen multiple times and then hold it for a good second or two, OR I have to lift my pen and then attempt to press and hold the button again. After doing either of those 2 things it'll work for a random amount of time. Usually alt-tabbing onto another monitor/window breaks it again. The pen's working fine and in other programs there's no delay.I can alt-tab into Blender for example and instantly press and hold alt/ctrl/shift and I can see the modifier keys taking effect by the bottom toolbar changing.Same goes for any other program, the buttons take effect immediately, but inside of SP they randomly break and are unresponsive.This happens upon alt-tabbi

Hey guys! I bakes my body mesh and for some reason when i try using generators its causing uv lines/ my mesh mesh to show up. i baked it as a i normally do any ideas?

Something that would be super awesome is a tool where you can click a location on the 3D Mesh and have it highlight the location on the UV Map. Sort of like the find cursor function on Windows, but to find a location on the UV Map. It could even work in reverse, clicking on the UV map would ping the location on the model. I spend way too much time finding where something is on my UV maps, currently I make a pink paint stroke or fill layer with mask to find where it is, but even then sometimes I have to look a while to find it. This would be especially helpful on models with UDIMs.

I UV unwrapped a model in Blender.  It's meant to be a tiled wall so I scaled the texture to reflect the real-world size. When I do this, the size of the UV islands increases so it extends outside of the UV Grid. It looks fine in Blender but when I import it into Substance Painter, I get texture distortion. Does anyone know how to fix this without compromising the texture scale?

Hi everyone,  I'm not used to bake from high poly to low poly, so i don't know if i'm doing something wrong. When i try to bake in substance i meet this problem with the cage:Basically one point doens't move like it's supposed to so it end up creating an artifact during the bake.It shoud stay straight when i increase the cage's size  The result: The mesh  

Hi everyone,I'm facing an issue where the textures look normal in Substance Painter, but after importing them into Blender, there's a lot of abnormal thickness appearing on the model. It might be due to an issue with the settings during the export process in Substance Painter, but I'm not sure what exactly went wrong.If anyone has encountered this problem or has any suggestions on how to fix it, I would really appreciate your help!Thanks in advance!

How toCreate  Fill layers for all texture set in there layerstack with python.Should be a simple command?trying to do a simple but usefull autoBaking system. for streamlining some of our pipeline. 

See attached video for example.  I'm trying to use the 3d paths tool because it's a better workflow, but it's now working for me.  My maps are baked at 4096 x 4096. I created a paint layer then clicked on the stitches complex since I'm trying to create an overlock stitch.When I click the pin tool the stitch disappears from the properties panel. I created the path but there is no path just a white blured line.  I tried this many times but it didn't work right.I used the adobe official videos titled: Creating 3D Paths in Substance 3D Painter andIntroducing the 3D Path Tool Presets  what am I missing.  I tried to upload a video but it kept saying it was private when it isn't private.

Hi,If I have a material in a layer, and when I am browsing materials in assets browser and when I click a material instead of drag&drop on the layers then Substance overwrite materal on the selected layer but keeping the name of the layer. Substance is very slow (I have top end PC) so many times Substance accidentaly replace my existing materials when I browsing materials. This is very frustrating, how can I turn off this function?

The program starts and i can load old *.spp and work with them, Only when i try to select a mesh in existing projects or new it crashes with this last line in log:[ ERR] <Qt> Cannot mix incompatible Qt library (5.15.1) with this library (5.15.8) The last time it worked normal is a month ago and since then i only updated the gpu-driver which i already rolled back and reinstalled SP. How can i even clean up the qt-library conflict, which doesn´t seem to be just one google search away?

Hi,As the title says, exporting a mask to a file often freeze the software and the process need to be stopped.It does not seem to always happen, but it was not happening before. I will take my current situation as an example;I opened an old substance file and try to export a mask to a file ＝ no problem.I close and open a new project that I have just started, then try to do the same ＝ Freeze.ver. 10.0.1Windows 11

hello. This is a character modeler using substance painter 9.1.2.There is modeling that synthesizes a normal map from multiple resources using render to texture.I want to bake a curvature map from a normal map synthesized using the Generate from Normal Map function,but it appears as if the normal map is not recognized.I would like to know the reason and solution.  

hi guys! I have bought substance painter 2022. And Substance designer 2023 from steam. Now i made materials in designer before and they worked perfectly well. Except now, my materials either don't work at all or look COMPLETELY different. I have a log file, if you guys need it. But i desperately need help, because my deadline will hit in 5 days.