Adobe Media Encoder

I'm working on a project where I need a compliant SD bluray stream. All content is originally SD and needs to be in 720x480@59.94i, sadly, both Bluray MPEG2 and H.264 profiles only allow 29.97, which are not bluray compliant. I will be ingesting these into Scenarist. I would normally use Total Code Studio but it won't allow me to change the resolution to anything below 720p. Any suggestions?BTW: I'm using Build 11.0.2.53 which is 2017.0.2 Release

I've been trying to render out a gameplay video, but every time I render it out, the quality is extremely bad. It gets very discolored, pixelated, and blurry. I've attached two screenshots, one of the source material(I know it's not that good to begin with) and one of the rendered product. Any setting that I change from the render settings have no effect on the outcome of the render quality. I've tried setting the bitrate to absurd levels and tried different video formats, but nothing changes. Each and every render, no matter what program(Vegas, AME, or even straight out of After Effects) produces the same results. I've watched several videos that claim to fix issues like this, but even those don't fix it. Every thread I've come across yields no solution, either.The source material was recorded with Nvidia Shadowplay, and it is 1080p 60fps MP4.My basic PC specs are as follows:Windows 64 BitGTX 1080i5 6600k16 GB of RAM2 TB HDDAny suggestions are very much appreciated. I would like to fi

I own a medium powerful laptop and desktop, have the latest update of Premiere Pro, and i am very proud of it without any bugs! BUT! i m working on buying a very powerful new editing system cause i really need to boost the time i spend exporting! Now my question is, Queuing to Encoder takes TOO much time to appear in the Encoder panel, then sometimes export has Media Offline (that is solved by cleaning the cache) but the time i have to wait so it appears in encoder takes too much time ! What is the solution ? and if i upgrade to a very fast editing system with like fast SSD great Graphic card, will it help to be faster or not ?Thank you.

I use a number of Macs with various configurations. While the latest AME 2017 works fine on my Mac Pro, it doesn't even launch on my Mac Mini. The Mac Mini is old (2010) but satisfies the minimal AME system spec specified by Adobe. I had been going backwards with the versions, and finally, CC 2015.3 did launch. FYI, it's the Core Audio that's failing for the newer AME (or at least that's one of the issues). Can your CC desktop admin app tell the proper installability? I wasted HOURS on this.

My machine is installed windows 7 to open the adobe media encoder happens the following error:Error: Could not find registry entry: BaseDirectoryHelp me!Thank you.

I am editing in Premiere Pro CC 2017 and rendering by queueing the project in Media Encoder CC 2017. After rendering, some (not all) of the titles that I created in Premiere are vibrating in the H.264 file. Adding/deleting/adjusting  layers and/or key frames does nothing. However, if I export from Premiere directly the issue disappears.Has anyone experienced a similar issue?Thank you.

hi everyone !does anyone have an idea how to encode video in 4k portrait format ?

Hey all..I need to encode a bunch of clips from various folders and the IT person wants to be able to allocate space on the file server before the render starts..Is there an option for me to do that within Adobe Media Encoder for estimated job output size?Please let me know as soon as possible.Thanks in advance!! PS... I know there is this site but I need to have this done on a massive and as accurate scale as possible.Video Space Calculator - Digital Rebellion

Hi, I have a Dell XPS 13 (9350) with Intel HD Graphics 520.  For a year I exported in Media Encoder with hardware acceleration and it worked flawlessly.  After replacing the stock m.2 sata drive with a pcie drive, hardware acceleration is no longer available and export times are about 25% longer.  Any ideas?  Thank you for any thoughts on this.

Hi there everyoneI'm outputting a video from AE through media encoder. The video is 1180w x 530h. The media Encoder preview looks fine, but when I export, it looks squashed.Does anyone know what I'm doing wrong?Thanks a lot!Export Preview:Actual output:

Since updating to 2017 media encoder I cannot seem to export a h.264 YouTube video. I have to export the video inside premiere pro which is fine but its so much quicker exporting with encoder. the video will get maybe 3/4 through and just pop up saying cannot continur and must close the program. So annoying! Does anybody have this problem Or a fix?

Hi,Finally got around to updating to AME 2017.0.2 today from the 2015 version. Now when rendering GoPro media to XDCAM50i it doesn't render the audio... totally mute when it's finished.The GoPro audio is AAC - 2015 release had no issues dealing with this.

When I'm exported my scene AE in Media encoder, I have this result. I don't understand this problem.In my composition, all files is correct...Could you please help me to resolve this problem.Thanks.

Hello again I have read a few way of doing this but I have not been able to do it with the info I got and can't find anything in the FAQBut I understood that Media encoder should remember the last export folder you used and make it the new default. However I have done this many time but still get the wrong export folder and I have to change it manually  every use! It's not a big deal but if you forget your export media is somewhere else, yes that unchangeable folder.So I hope someone has the answer Thank you.MM

I just updated to the most recent version of Media Encoder CC. When I try to export media from Premier Pro (File > Export > Media > Queue) I get this error message: "Adobe Media Encoder is not installed. Please download and install it to use this feature. Go to https://creative.adobe.com/apps"I have Media Encoder open right now, so I KNOW it is installed. I have tried uninstalling and re-installing Media encoder, and I have tried restarting my machine. Neither has worked.How can I fix this? Is it possible to go back to a previous version?

Hi, I'm using AME strictly for encoding videos. Is there a way so that it can delete source files after encoding is completed? Thanks for reply.

Hello I am trying to render a - .mp4 / h.264 - 360 video in stereo (3840x3840) at 60fpsI keep getting an "Invalid Framesize/rate for this level. Increase profile and level and try again"A) Is there even a way to update your h.264 profile/level? B) Any suggestions to make this render work?C) h.265 works but GearVR and youtube won't accept them...?THANK YOU!!!

Hi,since upgrading to the latest version, my exported files are way bigger than before.Example: a commercial of 20 seconds was exported at 1280x720 3mbps CBR and became about 8MB. When I export the same commercial with the same preset after the upgrade the file becomes 42MB!Maybe a bug in the upgrade?Jan

i am using Adobe Flash Media live Encoder 3.2 I am streaming live to Facebook at our church. I am using a Cannon XH A1 connected through FireWire. The PC is an hp Quad Core with 8 megs of Ram. Our internet is 75 Mbps download, 10 Mbps  upload. I need a constant stream. My bit rate is 2000 Kbps I went down to 1000 no change.

I rely on Media Encoder for my work and thought that the problem would resolve itself once I updated. But I'm still very much in need of fixing this issue. When I send a project for encoding to ME from Premiere or After Effects it doesn't show up for exporting. However, after sometime it does sometimes appear in Media Encoder, why and how I don't know. But for my purposes is not currently a usable option, I have to export in Premiere, which isn't terrible, just slows me down a little. Or the Renderer in AE, which is forcing me to create very large files, several gigs, instead of 200mb.Thanks for any help!

I have recorded a lot of footage both RAW (hyperlapse) and Video (AVCHD). For the video shots I have used framerates of 23.976 and 59.976 for slow motion. Before I went on the shoot I quickly had to set up a camera with some settings and set it to Adobr rgb, because someone said so.However, now that I have read my way around different color spaces and the AVCHD codec, I found out that using Adobe RGB may have not been the best idea in terms of postproduction complications. Also I want to transcode the footage to a better performing codec and therefore decided to transcode to eather a cineform yuv 10 bit or rgba 12 bit (windows system).I know that I could work on the footage natively in premiere, but I have plenty storage space and would like to increase the performance. Also, I am planning to do lots of grading as well as time remapping, masking and transitions in after effects without losing more quality.Now I have the following question: Might it happen that if I use prelude and adob

Hi there,I have the following problem:When ever I start to render something with AME (wheather from Premiere or After Effects) the program doesn't use my full RAM capacity, even I allowed the Adobe programms to use it in the preferences.See these pictures, taking during a rendering-process:It doesn't depend on rendering settings.I'm using a Windows 10 Lenovo P50 laptop. Intel Core i7.I am assuming that my render process could run faster with the not used 5GB RAM, am I right?Can somebody help me? Thanks very much in advance.Regards,Christoph

I have recorded a lot of footage both RAW (hyperlapse) and Video (AVCHD). For the video shots I have used framerates of 23.976 and 59.976 for slow motion. Before I went on the shoot I quickly had to set up a camera with some settings and set it to Adobr rgb, because someone said so.However, now that I have read my way around different color spaces and the AVCHD codec, I found out that using Adobe RGB may have not been the best idea in terms of postproduction complications. Also I want to transcode the footage to a better performing codec and therefore decided to transcode to eather a cineform yuv 10 bit or rgba 12 bit (windows system).I know that I could work on the footage natively in premiere, but I have plenty storage space and would like to increase the performance. Also, I am planning to do lots of grading as well as time remapping, masking and transitions in after effects without losing more quality.Now I have the following question: Might it happen that if I use prelude and adob

I'm a DIT and one of my job duties is to export lowres proxies with timecode burned on for transcription purposes.  So i'm exporting anywhere from 5 to 100+ files at a time.  When i put on the timecode overlay effect over multiple selected files at once using the 'Generate Timecode' option it defaults to 0:0:0:0 on all the clips. I have to go to each file and swap to the 'Media File' option then back to get the proper timecode overlay. Even then sometimes AME doesn't collect the proper timecode.Am i doing something wrong when trying to apply this overlay to multiple files at a time? Or is this just a 'feature' of the software?

Hello,I have audio that I captured from a 1990 VHS concert of a group I was in. First, I made a copy of the 32-bit (float)/48kHz raw file. I then performed the cleanup and editing in Audition CS6 (with no alteration of the file length), saving the finished, master file as 24-bit/48kHz. In Premiere Pro CS6, I imported the video file (and its raw audio track), along with the edited audio file into the sequence. After syncing the edited audio with the video's original audio, I unlinked the video and audio, deleted the original audio, then replaced and linked the new audio to the video as Audio 1. The video is going to have several destinations, i.e., YouTube and Vimeo, DVDs, and possibly Blu-ray (yes, I know there's the issue with SD). Here's my question: Based upon the destination, should I perform all of the audio encoding in Audition first, then import into Premiere before exporting from Media Encoder? In a nutshell, I wish to export a video with audio in Dolby Digital (ac3), one in MP