Master the art of compression, share and learn.
Recently active
I've been having an issue everytime rendering with media encoder. Video preview in AME looks fine, no errors, but the final clip looks like the images attached. When I render directly from Premiere or After effects it renders fine. I tried updating the card's driver, and reversed the driver back to previous versions. I also tried unistalling software and re installing. I also did it to the whole adobe suite and the issue continues.
Hi, When I select h.264 format, I am used to select some presets, and by default, the first preset of the list remains selected what ever I do. Is the new preset selected really selected even if the check in the list is not updated, or is the new preset selected really not selected.... ? So it's a mess. And when I close Adobe Premiere AND Adobe Media Encoder, I can have fatal error... It seems that the default presets "Correspondance à la source - Débit élevé" and "Correspondance à la source - Débit moyen" are bugged...
In Adobe Animate when I export to video I can select 'Start Adobe Media Encoder Render Queue immediately' so that Adobe Media Encoder will start immediately exporting the video. Ever since I've updated Adobe Media Encoder to version 24.3 (build 49) however this doesn't make Media Encoder start the encoding process. It just waits for me to click the 'start queue' button. Used to work fine in the previous Media Encoder version (where I also used the latest Adobe Animate version).
When opening the Media Encoder application, an error message appears:- Error:Could not load library: sx32w.dll. What should I do?
When I export any video to H.264, medium or high vibrate, the result is a damaged video. The audio is complete, but image got like attached picture. It happens with Premiere pro and Encoder. Quicktime or AVI output doesn't have any export issue. It is not a custom preset or any damaged footage, It happens with any project. Please help. 😞
Hi everyone,I'm facing an issue with exporting a sequence from After Effects. The requirement is to export it as an mp4 file without audio, using the H.265/HEVC codec. Additionally, the target size is 12032px x 96px, with a frame rate of 60 fps and a duration of 20 seconds, as it's intended for display on an LED strip. The predicted file size is around 20 MB, which is good. However, every time I try to export the sequence, I encounter an error message:Error during export Error compiling the film. Here are the export details:Error during exportError compiling the film. Error during export Encoder could not be created. Writing with exporter: HEVC (H.265)Write to file: ....Final.mp4File type is written: HEVCTo timecode: 00:00:00:00Component: HEVC (H.265) of type ExporterSelector: 9Error code: 3 Could the error be related to the size? Exporting at 12032px x 200px works fine, so I'm wondering if there's a minimum height requirement for HEVC encoding. I'm e
Dear Adobe, Could you enhance Media Encoder not to stop the process or slow down the process even it's close the shell of MacBook Pro? When I close the shell(display panel), It seems to be slow down the process or stop the process. But I expect that it will process Exporting footage as a specified video format. That's common background process approach.If there is no API available for the under shell closing from Apple Inc, Could you kindly ask Apple to develop the API. I think there is the API to support my idea not to stop the process or slow down the process. Thank you so much. Best regards,
Hello So im getting a random "failed" error in media encoder when rendering my files I can add the file to the queue again change no settings and its does it fine here are the settings: Preset Used: Youtube- Video: 2560x1440 (1.0), 60 fps, Progressive, 203 (75% HLG, 58% PQ), Hardware Encoding, Nvidia Codec, 00:14:25:11- Audio: AAC, 320 kbps, 48 kHz, Stereo- Bitrate: CBR, Target 80.00 Mbps As i say when it fails i can click duplicate in media encoder and it will try again and completes it fine Any ideas why this happens
Is it possible to add additional columns to the Media Browser, such as Date Modified? How would I do that? Thank you!
Hey, i do not know if anyone had this problem already.I render a list of ae comps and at the beginning it looks all fine.Aftter a while - always different - the process stops during rendering a video when the video has reachend 100%. So when I check media encoder again for example after 3 Hours I see the last frame of the film in the preview and it has stopped. Then I have to restart media encoder and it works again. Does anyone know this problem and can help me? I have Windows and the newest version of Media Encoder. I tried to remove the cache, does not help. I use cuda rendering .. but I already tested several options. Thanks for your helpAndi
I realised this today. It's not the first time this happened to me.I had to leave the PC to render overnight. Project from AE. (besides all renders in ME are painfully slow, for example if I put same source files into Premierepro and export directly from there it takes fraction of the time )So I started exporting. estamined time was 7 hours. When I was leaving the PC 4 hours passed, 3 hour left. I turned off screen and left.In the morning ( about 8 hours later) after turning on the screen I noticed that export time got stuck. 4hours passed, but estamined time was now 10 and half hours... Just afterwards the progress bar and passed time started to move again.( my media server has power options set to never go to sleep, never turn on screensaver, all power savings are turned off) I'm used to render a lot overnight ( not just video ) and this ( and slows renders from ME in general ) it's really annoying. Does someone experience a similar issue? is there any solu
I am exporting from Premiere Pro to AME. Timeline video is in 4K with MOGRTs and PNGs. Playback is fine in Pr. Even the preview is fine when rendering in AME. Codec is H.264 with a LUT. After the render is complete I try to play it in multiple players including VLC and the video is greyed out. I even tried removing all LUTs, PNGs, and MOGRTs from the render and still the same problem. However, when I render in H.265 the output is exactly what is expected. Does anyone know why this might be happening? Thanks. OS: Windows 11. AME/Premiere: 24.2.1 (Build 2)All Video shot with GoPro 9 and DJI Mini 3 Pro. (Used with no issues multiple times before.)
Hello ive been having this problem with encoder 2023, Iwas doing an after effects composition an the when i send it to encoder and clicked in dinamic link the file looks like this (In the picture above) it doesnt look that way in after effects and there is not a layer underneath it. I tried with other videos exporting them from after effects and the same happens,. How can i solve this
Media Encoder 24.2.1. Attempting to encode a Quicktime ProRes 4444 W Alpha video from a 2000 frame image sequence. If "Interpret Footage" is used with "Assume Framerate" (24fps in this case), the frames only encode properly partway into the finished video. At some point, the motion gets stuck on a single frame, and that single frame is encoded into the remainder of the video, frozen in place until the end. Previous versions of Media Encoder tested and do not have this issue (Currently switched back to 23.5 which works fine)
I have had several crashes trying to encode a 4K video I edited in Premiere and am exporting with Media Encoder that is 11.5 hours and takes 45 hours to encode with the export settings I'm using. I have had 8 crashes so far, and most of them anywhere from 50 to 75% of the way through the encode, so you can understand my frustration here. First off, my specs:CPU: 5950xGPU: 3080TiRAM: 64GB DDR4Source Footage is on two 8TB SATA SSDs striped together, roughly 1 GB/s read speeds as a resultSaving to a 12 TB SATA HDD I am encoding using Voukoder, an export plugin that allows me to export using x265, which I prefer over the built in encoders, for certain specific reasons that I need for my exports. I know Adobe's first response may be to try to blame Voukoder, but I've had that plugin crash in the past. It produces its own log, and its crashes also don't look like what has been happening here, so I don't suspect it's Voukoder at fault here. I actually successfully e
Ayuda amigos!!!Todos los video que exporto desde after effect a Media encoder para procesarlos me aparecen asi; parece como que no sale cortado del lado izquierdo y se ve esa parte en el lado derecho como lo puedo solucionar
Hi, Can anyone explain why everytime I use media encoder my program monitor closes down in Priemer Pro? I then have to go to Windows>Workspaces>Editing to open my workspace EVERYTIME I use media encoder? Why? This has been happening for around a year. I thought it was a bug but I guess it's not? Thanks, David
Does anyone know how to fix, when I tried exporting my footage in media encoder it changes the original color. I need help ------WHEN EXPORTING IN MEDIA ENCODER----ORIGINAL COLORS
Will only render part of the clip when slowing down footage shot at 60fps to 23.976fps with 'Interpret as...' in AME. Both 'Source' and 'Output' are set to 'Entire Clip'. This has been an issue before, but was fixed. Now it's broken again. Reverting to AME 2023 for now, where this works. MacOS 12.7.4 MacBook Pro M1Max 64GB RAM; AME 24.2.1
I created two similar H264 output presets - the only difference is one has captions burnt in and the other is clean. If I apply them individually (ie duplicate the source with only one output) then everything works as expected howeve if I apply them as two outputs to the same clip the captions do not get burnt in on the preset with burnt-in captions. The workaround is .... to apply them individually. I have other similar H264 presets which do work.... go figure. I tried to attach the presets but the forum won't accept them. AME 24.2.1
I made an animation in Adobe Animate, and exported it to Adobe Media Encoder, the preview looks fine and just as I want it to, but when I open it depending in what program, it either has a black screen with slight glitches or just a straight up black screen. I have tried many settings such as changing from software to hardware, different presets in both animate and encoder, resetting preferences, I genuinely don't know what to do
I'm pretty sure that you used to be able to preview your content in Media Encoder but I can't seem to be able to do that now.So I can select a range to be exported but I can't actually watch what my selection is!Is that really the case? How am I supposed to select the bit I want to export based on the audio?Or simply know exactly what I'm exporting? Why isn't there a play button in the export settings window???????
This error happens to me constantly when trying to create proxies for 4k footage (usually happens on longer clips 4+ minutes in length). I've already tried every different proxy preset ingest setting, even made a few of my own in Media Encoder. Nothing seems to work, errors out at the same timestamp. Posting Media Encoder logs as well as system specs, not the best PC but this still shouldnt happen, please let me know if anyone can help ! I'm using Media Encoder V.22.0 and Premiere V.15.4.1
Hi! I'm an animator who frequently uses Adobe Animate and I've been trying to implement videos to animate over and/or manipulate . There's one major issue though... Adobe Animate supports .mov, .mp4, and .flv video formats but only properly displays .flv files when exporting the Aniamte document into a .swf file. Media Encoder used to support the .flv format but in recent additions removed it entirely. The only other way to implement videos in Animate is to export the video as a PNG sequence, but that can bloat your file size like crazy. Not to mention copy and pasting png sequences from one file to another just breaks the files even more. Additionally, various Adobe written posts and tutorials tell me to use Media Encoder to convert files into .flv that were updated recently. This is clearly incorrect as you can no longer export anything into an .flv format. I have 2 solutions; 1. Add support for FLVs back into Adobe Media Encoder2. Allow MP4s and MOVs to display o
Hi,So, we already have the 2024 version of the encoder. Nevertheless, to my shame, I still cannot figure out all its rich possibilities. I found out that there is no special filter for deinterlacing. But so far I can't find a way to add something from the filters that are installed in Premiere without opening it. So, how can I use the filters installed directly in the encoder? When I start it, I see their list running through, but where are they, how do I apply them?Thanks.
Remix with Firefly Community Gallery
Thousands of free creations to fall in love with and remix in Firefly.
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.