Adobe Media Encoder

Independente do preset ou configurações, o media encoder ou o próprio premiere, estimam um tamanho de 32mb (por exemplo), após renderizar o arquivo, fica com 110mb. E assim, por diante, se estimasse 1gb, acaba com quase 4gb.

First off, I've always used Handbrake instead of Media Encoder when a client needs a very small, compressed mp4 for web since it seems to do a much better job.  But recently, I've come across a quality issue even when converting a ProRes file to MP4 using the default "Match Source- High bitrate" preset in Media Encoder.  It only happens in this one spot in this one video.  I've never encountered this before but wonder if might've happened to a lesser degree in the past and I didn't catch it.  When I use Handbrake for the same conversion, it looks fine.  See attached screenshots of the ProRes file and the Media Encoder MP4 conversion.  Media Encoder team:  I can send you the original ProRes file if you'd like to investigate. Spec:Macbook Pro M1 Max, 64GB, Ventura 13.2.1, all latest Adobe updates (Premiere & Media Encoder 23.5.0)

Привет. После рендера видео в media encoder он начал лагать и звук тоже. помогите решить проблему

So I have created and animated a few essential graphics with premiere pro for a social media video; works fine on premiere but when it comes to media encoder, some are disappearing and others are stacked on top of each other. i've had emptied media caches, restarted my laptop. but nothing works.. could you pls help  

I have two new versions (2024) of After effects and Media Encoder but when I send you projects to rendering in Media Encoder is not working, someone can give me some tips about it 

Same problem here, out of nowhere rendering in the timeline and exporting from both Ae and AME started taking much, much longer. What would usually take 1-2 mins is suddenly taking 30 - 40. I updated to Ae 2020, no change, updated my graphic drivers, no change. Tried rendering with mercury software only rather than GPU, hasn't made any difference. I have 12 core, 64 gigs Ram, Nvidia 1080 Ti, I don't really see why it should be struggling like it is. At one point I couldn't even use masks in Ae because the lag was so bad it made it impossible to work. Its really frustrating to go from a relatively great workflow to something that is, at times, barely usable. Any advice or fixes on this would be greatly appreciated.   Title edited by Mod

I'm used to work with "GOYO VOICE SEPARATOR" audio plugin on Premiere Pro to enchance my audio quality, but when I render my videos on Media Encoder, the plugin it's not working. Please help, I'm rendering every video manually on Premiere.

I have updated all apps and restarted (mac studio M1 ultra) but I get this message when trying to render from AE 23.6.0 to AME 24, build 54.  Iit will not open encoder and I get this message: 

Versions: Premiere Pro: 14.0.1 (Build 71)  Media Encoder: 14.0.0 and 14.0.1 (Build 70)   Exporting from Premiere Pro with Custom Audio Plugins (VST3 / FabFilter Plugins / Youlean Loudness Meter 2 / dpMeter4) works when exporting through Adobe Premiere Pro.   However, it always fails when going through Media Encoder. This worked a couple months ago but stopped working in the latest versions. I also tried if rendering via software only or METAL makes a difference, it does not.   The issue is active whetherr the plugin is on a active channel, master, or a channel with no information on it, it also persists when the plugin is 'disabled' in the mixer.   I am running the latest version of Youlean Loudness of 2.3.2   If I only use standard Adobe Audio Mixer Plugins, it exports like normal.   This issue persists with and without markers (seems to be a different problem than the flash marker issue).   I hope someone can find something with me to fix this.

Until very recently, I've been using CS6 Media Encoder to export AfterEffects projects directly to P2 format in a television control room environment. ME would compile a "CONTENTS" folder and all the related subfolders and files for playback on a P2 deck. However, within the last month, my employer updated my editing system with a Mac Studio and CC, which is great, but... ME seems to no longer support P2  Movie export. An Adobe user guide updated May 23, 2023 says Premiere projects can be sent to ME and exported as P2 files, but I see no drop-down "P2 Movie" option when I try. I've also tried rolling back both Premiere and Media Encoder through multiple versions, and still no luck. Any suggestions?

Does adobe actual check things when they update.....each time its major screwups. The Media Encoder wont load anything and just freezes with zero CPU use. Cant open files internal nor export from prem pro. Everything with this last update is screwed....even keeping settings didnt happen and has stuffed up so many things including stabilise, new project default settings etc....when will this be fixed. I notice that no one even is replying to people posting bug issues....are these even being read?

This issue has been happening for a while now, when I grab a composition/pre-comp from After Effects (v23. 6) and drop it at Media Encoder, it infinitely tries to connect to Dynamic Link servers. Sometimes when I restart my computer and try again, it works, but it's almost a dice row.  This wasn't a issue back then, and reverting the version doesn't seems to work. This is not a problem when importing media directly into Media Encoder, it's likely a problem with the Adobe softwares communication.  SoftwaresAfter Effects 23.6Media Encoder 23.6Windows 10 Pro 22H2HardwareGTX 1050ti 4GBI5 3570K16GB Ram8TB SSD Storage

Impossible de faire une sortie MXF stéréo! Le fichier finit toujours Mono!Alors que si je fais une sortie Quicktime le stereo est bien gardé!Comment faire pour faire un MXF qui respecte le stéréo (sur les 8 pistes il faut du son sur les deux premières!)

When exporting a 3 minute timeline in Media Encoder as .mxf file, it seems to render the whole timeline, but when I open the resulting video file, the mxf video only contains the first 13 seconds. This also is consistent with the file size (332 MB instead of 4,26 GB as it should be).When exporting the same timeline with the same settings right from Premiere Pro 2024, the resulting file is correct.Also, no warnings or errors are given in Media Encoder.Export settings are:Apple ProRes 422 HQHD - standard settings24 bits audioOperating system is Mac Pro 2019, with OS Sonoma 14.0  

Hello.I own an Apple M1 Max laptop with 64GB of memory. It took me approximately 6 minutes to complete the export. Both Adobe Premiere and media encoder have been tested on it.

ı have an 18 second video from after effects ı want to export it but every time that ı tried it is just a 1 second black video can someone help me?

    Welcome to Adobe MAX 2023!October 10-12 Register Here. Attend virtually, or join us in Los Angeles for the live conference! MAX FAQ: Find out more. See what you can learn. MAX Sessions: Pick from a huge variety of digital video & audio courses. Welcome to Adobe Media Encoder (v.24.0)! The October 2023 release of Adobe Media Encoder (v.24.0) is now available for download from the Creative Cloud desktop app. This update includes bug fixes, new features, and performance improvements. The update is recommended for all users. If you are experiencing any issues, please create a new thread explaining your problem so we can help. Effects Manager The 24.0 release of Adobe Media Encoder now includes Effects Manager, which lets you manage all your third-party plugins in one place. Use this new feature to quickly identify & disable incompatible plugins to make your system more stable and get back to work faster.   New support f

Hello,Just noticed this after updating to the latest and greatest version 🙂 23.3We the keyboard shorcut to send media to Adobe Media Encoder for export instead of using the export panel within Premiere is back! Hooray.BUT...if I open media encoder using the shorcut it loads all the plug ins really slow each time. Usually this is done only once when you open up the program for the first time, after that things are pretty fast. Not here.However if I open Media Encoder separately it works just fine, plug ins load blazing fast. Not a big deal, but a bit annoying.  So,Media Encoder 23.3 build 57Windows 11Intel 11th gen i7 processor

Latest update killed the auto upload to Vimeo. Tried multiple times via Media Encoder. Yes, I'm logged into Vimeo.Macbook Pro 2019, iOS 11.6 06/30/2023 08:00:17 AM : Vimeo - Could not obtain upload ticket06/30/2023 08:01:08 AM : Vimeo - Could not obtain upload ticket06/30/2023 08:02:34 AM : Vimeo - Could not obtain upload ticket06/30/2023 08:03:13 AM : Vimeo - Could not obtain upload ticket

Hi, We're having an issue in AME when selecting "Match Source (Rewrap)" as it sets the audio export settings to stereo, 16-bit as default despite the source file actually having 4 discrete channels with 24 bit audio.  The source file is ProRes 422 HQ. We pulled the file into Media Encoder so that we could trim the file and we wanted the export to match the source settings hence why "Match Source (Rewrap)" was selected. Do you know what could be causing this?  We have a workaround in place but the Match Source (Rewrap) should be reliable in matching the source settings.  Thanks

Media Encoder 24.0 (Build 54)Windows 11 Pro - 22H2 Build 22621.2428Encoding stops when the window loses focus. It starts again when the window gains focus.To recreate:1. Set any video encoding - i have tried prores to h264 and h264 to h264. 2. Click on a different winow, wait a bit - observe ME has stopped3. Click back on ME - observe that it picks up where it's left off.I went away for a few minutes the first time this happened, it really does stop encoding, not just stop updating the UI.  

Media Encoder is not part of my subscription. Why does Adobe keep giving me updates when I do not use it?

I hav i5 4570 16gb ram SSD and 3gb Gtx1060 Nvidia. When i activate mercury acceleration with cuda the render speeds dont even improve and the GPU will be operating at 5% o less the processor and ram will be less tha 80%. A 30sec project with basic 3D layers and camera depth of field takes 50minutes to render.I have tried changing program setting in nvidia control panel for the app to use maximum performance and overclocked the card bt nothing changed.What could be the problem?

Ver23の途中あたりからだったと思いますが、エンコード時に「最高レンダリング品質を使用」にチェックを入れても、チェックを入れていないのと同様の画質でエンコードされます。 たとえば4K30pで撮影した素材をPremiereの4K30pのシーケンスに読み込み、スケール200に拡大するような編集をしたとします。 これをBlu-ray（1920*1080）やDVD(720*480)用の解像度でエンコードするとき、Ver23.0までは「最高レンダリング品質を使用」にチェックを入れていれば綺麗な画質でエンコードできていました。 しかしVer23の途中から、「最高レンダリング品質を使用」にチェックを入れても、チェックを入れていないときのようにギザギザの画素不足のような画質でエンコードされます。（※Premiereのプレビュー画面では画素不足のようにはなっていません。） なお、ソフトウェアエンコーディングでエンコードすると正常に「最高レンダリング品質を使用」の画質でエンコードされます。 構成の異なる5台のPCでいずれも同様の症状が出ますので、GPUの問題ではなくMediaEncoder側のバグだと思われます。