Audition

Am I missing something? I am new to audtion so I fully accept that possibitity. I am having two issues with Audition's Generate Speech Function:1. I am using largish text files, so each time I open the Generate window, it has to told the previous, completed text file into the editor, even though I am going to delete and add a new one. This is a laborious waste of time. Is there a way to a new Generator window with each open?2. I frequently find that the AI does not translate a word or sound as expected, so I must edit it. If I open the Generate window it is going to reload the entire set text sequence, wasting valuable time, and dropping most of the effects I have applied to the file. Is there a way to edit the text without this happening? I feel like I must be missing something obvious here. I am guessing the expectation is to not use large files but dozens of small files, but that just does not seem efficient. Though, granted, it anything would have to be more efficient to than

Hi All,I have edited a podcast but when I went to continue editing it looks like all the audio has been silenced apart from the last 5 seconds - can anyone help? 🙂 When I change the decibels, the green audio at the top disappears and it does this: What did I do wrong!??! 😞

For the most part I want to use multitrack editor, so it would be great to disable the ‘double click clip to enter waveform editor’ function. Reading around I believe this isn’t currently available as a preference?Secondly, is there a way to ‘protect’ source files from being overwritten? (Ie if I do end up modifying them in waveform editor it forces a ‘save as’) Thanks

I was trying to mix some music but I noticed that some clips had their audio cut short before the instrument(s) were finished playing out. I ignored it at first, but when I listen to the music in full, the cuts are very noticeable. I found an edit of one of the same clips to almost sound like the instrument(s) did finish playing out. Anyone know how to achieve this or just in general how to make it sound like a note/instrument finishes playing out? I attached some audio clips for examples.

Hi all I have been ripping CDRs recently and normalizing them to -3db via Audition. On the whole I'm quite happy with the playback results. Once and a while a song comes along and only achieves the -3db level in a couple of places (maybe a hit of a cymbal) making the overall sound of that song sound quieter to the other songs on that particular CDR. Apart from going into 'Amplify' and adding 1 or maybe 2 dbs to that particular song to give it a boost, is there any other way to get around this? I've added an attachment to clarify my problem. Thanks in advance if somebody can assist me with this dilemma. 

Why is Zoom so painful?There is a "Zoom to Selection" keyboard shortcut, but it's not in a menu?

Any suggestoions for Stream Deck packs? I found these; looks like two variations from the same company, with the 2nd being a more complete set.https://marketplace.elgato.com/product/adobe-audition-icons-aed47fc8-0da7-46c3-96c7-054482507b50https://www.sideshowfx.net/adobe-audition-shortcut-icons-complete-collection Any luck with Stream Deck Mobile? 

I have a double whammy situation.  One of our narrators has sibilance as well as makes a whistling sound occasionaly.  I have tried a few effects in Audition to remove these sounds but to no avail.  (Captured Noise Print, then Noise Reduction, Sound Remover, De-Esser, etc.).  Of course I could paint the "Esses" and  "Whistles" out - using the Spot Healing Brush Tool, but I have 7 files to edit and these whistles are omni-present.  Pease Help! I am attaching a sample audio clip where they are very easily visible in the Spectral Freq Display.  I would really apreciate it if someone could please send me step-by-step instructions (or a link to a video) on how to isolate and remove these sharp pitches from an entire file in just a few clicks. Many thanks!

Hello! I'm about to process a large number of files and I had a question about modifying the default options in File>Export to streamline the process. First, if I've opened another file and am using that to export the new one, the autogenerated filename for the new file is the original file's name with _01 appended. Is there a way to prevent the _01 from being automatically added?Secondly, the default export folder seems to be my Documents folder - how do I change this so that the default folder is always the original folder for the source file?Thanks for your help!

I have a cdlx file that I created some years ago (in 2021). When I click on it Audition opens and displays the normal configuration that I expect. So I loaded a blank CD into the drive and click the Burn Audio to CD button. Audition immediately generates an error message without saying what is wrong. I have burned 100s of CD in the past, so I picked a random cdlx file from a disc that I have burned in the past, and I have the same problem. I'll say it again ... I have burned a disc from the cdlx file in the past but it won't work today. Since I created all those cdlx files, I have built a new computer (in 2022), and the cdlx file of interest was created in August of 2021. Yes, it's old, but shouldn't it still work? Audition loads it and displays it correctly. Any help would be appreciated very much.

You can see in this video, there are two background [BG] audios. I do not want BG music but I want backgroud voice only. All these are in one track. Is it possible to delete BG music only? If so, if you can give proper name for this work, I can find out procedure form YouTube. Video also attached. 

Hi All,Hope someone can help? Every time I open Adobe Audition, it opens partly on-screen, partly off-screen. The header bar is hidden behind the Mac OS header bar so I can't grab that to move it back on screen. Its window size is deeper than the Mac's screen, so I can't grab the corner to try and minimise it and move it back on-screen that way. Due to the set-up of Audition, every time I try to grab the main 'black' space it just pulls a section out and again not possible to move the main window back on-screen.I'm not having this problem with any other Adobe package!? I think this is happening because I use 2 screens in the office but I always quite all applications and turn off my Mac before taking it out of the office.I've tried quitting and reopening the application but the same problem keeps occurring. I've tried restarting the Mac and turning it off and on again but keeps happening. I've looked into the display settings in preferences but no joy! I've tried disabling Mission Cont

Does anyone know of a way to activate Read, Write, Touch, Latch functions with a keystroke / shortcut?  I'm using an iCON P1-M which doesn't activate the functions but can map keystrokes. TIA.  

I have been exporting short clips from Descript transcript to Adobe Audition, but when I open them in Audition THERE IS NO AUDIO.  Its bizarre, because the transcript plays as usual within Descript, but is silen t in Audition.  Is there some setting that I erroneously set that has caused this?  Help would be much appreciated, since this is for a podcast episode that is now way behind, and we count on donations, sponsors etc, and we're running out of money.   THANKS Rob

This community has been so helpful I thought I'd ask another question. When editing, when I hit the space bar to play a section, I hear a burp of static, and occasionally in the playback. It is not in the file, but I hear it. It's making editing incredibly frustrating. I'm at a complete loss.I'm using a new install of 25.2.0.123 build, a wireless keyboard, and record with an SM-7B through a Scarlett Solo. I record speech at 44100, 32 float in stereo. There have been no changes to my audio hardware.

My audition keeps crashing Some files which are fine and have been working when opened just simply cvrash the program My audition is a new install on a new machine and i used the old audition 2010 until recently when support stopped and never had an issue This new audition has been 'buggy' since i installed it and keeps failing me. what to do? I even had a technician remote in and in the end we couldnt find the cause. Do i reinstall and lose all of my settings or whatever? is there a way to back them up? and how do i fix this? clean reinstall? this machine is fast and strong - 64g ram / NVIDIA RTX4060 / 3.64 TB /64 bit system / SSD drives /i7 core/ 8.19TB storage and NAS system -so why? ANtivirus - Malawares [personal email redacted - Adobe policy]

Is there anyway to assign a keyboard shortcut to Select Clips to End of Session? This would really take off so much time in editing of just going over to Edit > Select

Hey everyone, I got this project due soon and I'm trying to add an mp3 drum track. Every time I try to add it to multitrack, it says that the file doesn't match the sample rate of the session. If I click yes to convert it to the right sample rate, the new file doesn't show any waves or audio or anything. PLEASE HELP I am just so confused. I'm pretty new to audition.

I come hoping for a solution! I am setting up Audition (again) and when I go to create keyboard shortcuts, I can see everything fine except, the size of the window is too large to apply. I can see "undo" and "clear" and that's it. I have tried everything I can think of but to no avail. The window won't resize. Changing the resolution does nothing. Please?

I just bought a laptop with Snapdragon X plus...did I just spend a grand on a computer that can't run Audition??? Lordy. Is there something in the works, Adobe? Super frustrating.

Been hesitant to update my Mac operating system because when I did it a few years ago it made my Adobe Audition inoperable. To rectify the problem I had to go back to my original operating system which was then (and now still is Monterey.) However, now as a result of not updating my operating system I'm having other buggy problems with other applications. So, my question is is it safe for me to upgrade my operating system to Sequoia 15 and if yes, will my Adobe Audition 25 work properly?   Thank You, -Robert

WHY DO THE FAKE VOICES IN ADOBE AUDITION SOUND AS ROBOTIC AS THEY DID 6 YEARS AGO? WHEN WILL THEY IMPROVE? DOES ANYONE AT ADOBE CARE? DOES ANYONE WORK ON THIS? CAN YOU JUST LET US UPLOAD OUR OWN GENERATED VOICES ATLEAST? ANY PLANS TO DO VOICE CLONING EVER?

Hi,I use adobe audition, and I was considering purchase of Izotope RX8 plugins to repair some of the audio tracks I'm editing.I downloaded the RX8 trial, and added the plugins properly, and they work, but they are terribly small.I tried scalling methods on Win10 with going into Adobe audition shortcut < Properities < Override High Resoulution DPI scalling with System etc.  as well with RX8 program, but it was only changing the scale of UI of programs and cursor. The plugin size was still small.I was looking for some sort of scalling of plugins/ hovering windows settings in audition but haven't found anything.If anyone has an idea how to solve this problem I would appriciate.I attach the screenshot showing the issue.

I am a long time Sound Forge user trying to adjust to audition. In Sound Forge, if I add two markers, then double click the region between the two markers, Sound Forge selects that region (so I can perform an operation on the selected region).  This is a primary way I do lots of quick edits. I can't figure out how to do this in audition (every time I click, it selects the entire clip).How do I select the region between two markers?

I can't see or find the Essential Sound Panel anywhere! Help! i am in multitrack mode.. I see the different tracks and the "bar" with the different colors at the end of the tracks but can see or show the essential sound panel.