Audition

Recording a podcast using a combination of Audition, Voicemeter and Shure MV7 microphones via USB and randomly experience static upon playback. Advice?

I am trying to multi-track record audio using an external USB audio soundcard. I record track 1 which is fine. When I record track 2 while playing along with track one, it sounds fine - in time. But when I go to playback both tracks (to listen to them both), track 2 starts about a half-second behind track 1. I have set the latency in hardware set up to 30 - as low as it will go. The soundcard works and doesn't do this on an older version of Audition (legacy V 3 before they went cloud). I also have audition loaded on two computers and it does the same on both computers so it isn't the computer or soundcard. Please help - Audition is really useless to me at this point due to this issue. Any insight or guidance would be greatly appreciated. 

Can't seem to figure out why all of my audio files are saving with a question mark at the end. For instance, the file might be something like, Hello_01_Example_02 and I'll save it as a wav file, and it will save it as Hello_01_Example_02?.wav. Then I have to go in to every one and delete the question mark, since the files have to be exactly as written. I've tried uninstalling Audition and re-installing, and it's still doing it. I'm working on a Macbook Air. Thanks in advance. 

Hello all!I'm relatively new to using Adobe Audition. I have used it for some basic recording and noise removal in the past, but now I am working on recording some VO. I am trying to apply effects (compressor & Parametric EQ) to a track in the multitrack editor for use while recording live (I want the effects to be applied while recording to prevent clipping and some background hum). Supposedly these should effect the recording as it is being recorded, correct? However I am not seeing any change to my recording as a result of adding these effects. I also don't seem to be able to adjust the gain effectively.Any advice or feedback would be much appreciated - thank you!

I am Having an Issue with My Mic not being able to record anything. I have looked through a bunch of turtorials explaining the same things about going to audio hardware and Audio channel mapping and setting up my Mic and with everything inputed in correctly I still can't record anything from my Mic.

Bit of a long shot but is anyone selling an older version of Audition they no longer need?  My PC isn't high enough spec to run the latest one.

Hi there, I have searched and can't find anything on this subject newer than 2019. We are relatively new to Audition, we are on our 4th podcast (we as in me and my son). We are on the latest version of Adobe Audition. We just spent hours, more than 15, editing a podcast and it was perfect. We added the intro and saved it and then poof. The file went corrupt. No error message, nothing. The intros and outros are perfectly fine and we tried the previous episode files and they all play perfectly. But all four audio files from the podcast portion have all gone corrupt. When played, it sounds like skipping and each individual file is playing at once even though the spectral view, in the beginning, looks fine. The entire middle section of all four files disappeared as well. We have no idea what happened. Again, no error messages when saving, nothing. We went into the backup files to try to recover and the same thing has happened to all of the backup files (backs up every 10 minutes). We are a

I have an interview that I recorded on Zoom.  The file has both me and the guest on separate tracks which is what I wanted.  However; how do I make sure that neither track moves out of place as I continue to edit?  

I just finished creating a mix at a level of -23LUFS. Both the digital loudness radar and my external meter confirm it is -23LUFS. However, after importing it in premiere and resolve, both NLE's tell me it is -26,8 LUFS. All of the separate audio tracks are linked to buses. Voice to voice bus, music to music bus etc. All of the three buses are connected to one final bus, which I placed the loudness radar on. I only exported the final bus. I can't seem to find any settings that might make the audio volume lower during export. Can someone tell me what is going on? I seem to have this a lot in the past as well when I export the master track, sometimes the audio is a bit lower than it should be. Is there any way to tell audition to export 'what you hear is what you get'?

I am using Audition 3. My workspace displays the waveform in 3 separate sections. On the left is the waveform of the first 10 seconds and on the right, the last 10 seconds and in the centre the entire waveform. I can't work with this workspace, how do I restore the conventional simple view of the waveform?I would be grateful for any advice you could give me.Here's a screenshot.

I have been starting a YouTube channel and going through the audio and video editing but sometimes when adding audio into audition and premiere elements my audio sounds really quiet but if I play the audio through windows Media player it sounds loud and clear. Any ideas why or what is going on?

I have used Audobe Audition for years, (and Cool Edit) before that.  I recently got a new computer and have re-installed Audition 1.5.  Now playback sounds clipped and buzzy.  I record "stereo mix" from the sound card.  Could I have some sort of an input / output cinfluct?  Thanks for any suggestions.

Hi ... this has been driving me mad for a while now. I edit my audio files and they have a name like:  loud_Bounce_1_Copy(2)_R. I save the file as MONKEY Chapter 2 which is what I want it to be viewed as. However in Quicktime (and other apps) it shows loud_Bounce_1_Copy(2)_R...  how do I overwrite this to always have my preferred title on the file? HELP ME !!!   

Hi,In Adobe Premiere Pro, it's possible to queue up videos for rendering and export. Is there any similar feature for multitrack sessions in Adobe Audition?I have 100+ multitrack sessions ranging from 20 minutes to an hour that I need to export, being able to queue and bulk export would save a lot of time, since each individual export takes 5-20 minutes and the time remaining estimate is rarely accurate, meaning I have to babysit it.Thanks!

When I open Adobe Audition 2017 I get the following error message: Audition's primary temp volume cannot be found. Please review Audition's disk cache preferences."  I go to the preferences and see an explanation point next to Primary Temp. I click browse and I am in the Document's folder in my Mac. From there I get lost.Can anyone give me advice on how to correct this problem?

Hello!I'm working on a multitrack session and would go into waveform to clean up/normalize audio for each individual track. I'm normalizing all waveforms to -6dB. However, when I go back to multitrack, all levels are at -9dB. This didn't use to happen before. Is there a fix for this so that multitrack levels are syncing/matching waveform levels? Thanks in advance!

When I select the track I want to fix and click scan nothing happened. My audio is heavily clipped. 

Hello,I just recently installed Audition, and for a few days I was playing with the time stretch function. But this morning it suddenly seems to have disappeared - all I see now under "Time and Pitch" are "Automatic Pitch Correction" and "Pitch Shifter", neither one of which allows me to play with time.Am I I missiing something? What happened to the "Stretch and Pitch" effect (if that's what it was called)?Thanks,

Uso adobe audition 2019 y al momento de mover un clip en el multipista mientras se está reproduciendo la sesión  el programa se bloquea y se cierra, cuando reinicio el programa no se guarda nada. Alguien sabe si es un problema de velocidad de reproducción? ¿tarjeta de video?. Muchas gracias. Saludos.

BonsoirComment fait-on pour avoir un clavier pour jouer dans le logiciel.J'ai un clavier maitre Alesis V25. Il est branché en USB car c'est le seul moyen et adobe audition ne le reconnais pas.Quelqu'un pourrait-il m'aider s'il vous plait ?Jean-Christophe

Hello. I am working on a video that has minor sounds in the background. The subject of the video when speaking accidentally slaps his knee and you can hear it. I tried to get rid of this with the heal tool from Adobe Audition but that just damages the dialogue. You can also hear what sounds like floor creeks from the room where the video was filmed in. It's not throughout the video just from time to time. Is there a way to get rid of this?Thanks

Después de utilizar PROCESAMIENTO POR LOTES, se modifican en todas las grabaciones el campo "GENERO" por la palabra "OTHER"... gran inconveniente!!! Gracias por la ayuda!

Hi all,I was hoping someone might be able to figure this out as I've tried many things so far.  When I record from Stereo Mix in audition's multitrack recording, the sound comes with static/distortion (See link: Audition CC Stereo Mix Static - YouTube).Here are some things I've tried to fix this:-Listen to this device is unchecked for stereo Mix-Disabled my onboard PC microphone-Tried various sample rates when starting a new project-Updated Realtek sound drivers to the most current-Turned off Bluetooth-Recorded from YouTube In a web browser AND a separate game program-Turned my cell phone off since it was nearbyHere's the strangest part.  I downloaded Audacity and recorded using that program.. no static.  It sounded perfect.  This makes me think there's some setting or feature within Audition that I'm missing.  I'm very new to the software so this is entirely possible.Thanks in advance for your suggestions.

Is there any way to do the exact same thing that the "Skip Selection" tool does but I want to apply this skip multiple times throughout my audio track and I need these skips to be permanent edits saved in my file?  To explain further, I need to make edits to an audio file without deleting anything and without changing the overall duration of the track. Part of the reason that I need the time to not change at all is that I am working with files such as audiobooks where if I delete anything or if I adjust the speed/duration then I'll have other issues with the timecode for the start of each chapter being off compared to the table of contents.  I'm new to Adobe Audition so hopefully, this question makes sense. If it helps, here's a short Youtube video that explains the "Skip Selection" tool. I need to do exactly what's done in this video but I need to do it multiple times and it has it be a permanent edit (or some sort of similar workaround that can produce the sa