Audition

I need to edit the left and right channels separately within the wave view. I need this to be quick as we still do a live radio show. It has been fine for weeks and TODAY, the left and right channels show as overlapping in wave view and we don't know why.  How do I get this to be separate again? I don't believe I did anything except restart my computer. The file IS stereo not mono.  thank you!

Hi all, I am editing some audio and trying to use the match loudness function to bring the audio from -32 LUFS to -16 LUFS and when I do so, it amplifies a lot of the fuzz in the background that you could not hear in the original. Here is a screenshot of my audio before running Match Loudness:And here is a screenshot of my audio after:Should I be making it louder in a different way to avoid this problem, or should I just treat this amplified noise as background noise and try to reduce it using the Noise Reduction tool?Here is a screenshot of my settings when I run Match Loudness also:Also included the 2 clips attached.Thanks in advance!

I just recorded a podcast and this is the very first time this has happened. There is a gray file on the timeline that goes the length of the podcast, however there is no waveform and no playback. When I export the file there is no playback either; just an hour and 13 minute blank file. Ive tried to relink media with no success. If anybody has a solution please help! I havent found anything online that fixes the problem. 

 HELP PLEASE

I have a Multitrack Session with several clips where I'm using keyframes to automate volume envelopes, but whenever I close and reopen my Session, the keyframes at the end of some clips completely vanish. Some additional information on the issue:1) It only impacts keyframes at the end of clips - all keyframes at the beginning of clips are preserved.2) It seems to impact only remixed clips, however not all remixed clips - it's pretty random, but most do get impacted.3) The issue occurs in every Session I create, so it's not related to corrupted Session file. It also happens with different source clip files. I have been working with Audition for a couple of months and this has been a recurring issue. I have already tried reinstalling the application a couple of times to no avail. As of now I'm basically leaving my Sessions open all the time in order to avoid recreating the envelopes every time I reopen them. Any help will be most welcome!

Hi everyone, I've been working on a sound design project where I have a lot of automation (panning, volume, eq gain and frequency) on several tracks, but when I go to export my multitrack mixdown, the automation is completely ignored in my new WAV file. I have tried exporting each track as a stem, directly into adobe Premiere, and the master stereo file but every single time it removes my automation. I have spent hours of work to get my automation very precise for the scene so it is essential that it is applied to my export file. Is there something I'm doing wrong? Does Audition just always ignore track envelopes? If so, thats ridiculous for a product from this company.

Hi, everyone! Last year I bought a Behringer 302 USB to use for recording and for use with Skype calls & other things. It worked for some simple things, but I later determined that a Behringer Q1202USB was the winning ticket. As things on computers do, something changed, and I can't achieve the functionality I need. Not even the things I had initially. I'm not married to the Behringer mixer, so I'm entertaining suggestions for how to achieve these few things with some other hardware. I've used Audition sporadically in the past, but I intend to make it more central to things I'm working on. These are the things I need & want to do, and I'm open to any (hopefully) single piece of hardware that will work with Audition to accomplish them.Keep a mic plugged in and use it to record vocal tracks when needed. Record from programs, inclucing my browser or any sound/recording software into Audition.Mixing the mic with the audio from my soundcard would be a plus.Sendin

My Premiere - to - Audition workflow has been thrown into disarray.After completing an edit in Premiere I typically export the sequence to Audition.  I then sweeten the audio there and Export back to Premiere.Recently, though, when I return to work on the Audition Session, to make additional audio tweaks, one or more of the tracks is completely out of sync.  It seems many of the clips (strangely, not all) on that track go back to the beginning of the master file they were pulled from. Nearly every clip plays the same beginning piece of audio.Has anyone else experienced this? And what might be done?  The only solution I can come up with is to re-export from Premiere and perform the entire sweetening process again.  A LOT of work. 

Hi,I'm currently working on a multi-track project in Audition and the save/ export options are greyed out. Is there anyway to fix this without loosing my work? I thought about copy and pasting the audio into a new mixdown and then re-importing the files back into the new mixdown but unsure. Was wondering if anyone knows how to solve this? Thanks!

Hi, All the time I was using Marquee Selection tool to select a shape in Spectral Frequency Display for the frequency I need to eliminate (like constant noise, for example) and after I hit Delete button the selection was cleared. Now it behaves differently, instead of completely deleting the noise in selected area it diffuzes it or something, and in History I see "Silence Frequencies" line. I did find the topic on Reddit with the same problem and solution there was to go to Preferences -> Data and uncheck "Smooth delete/cut boundaries" and "Smooth all edit boundaries" options. Which I did, but the behaviour of marquee selection deleting is still the same. It annoys me beyond belief, so any suggestion of how to fix it? Audition is the latest version (Build 13.0.13.46).

Hi, guys, This problem just happened today. I was editing the audio file just fine when suddenly the Spectral Frequency Display graphics became corrupted - half of the track's representation is like an old DOOM game now, see screenshot: http://joxi.ru/5md3E7JS80RgLrI had rebooted the PC - opened several different tracks - still same issue. How can I fix it?

Community, need help - I have tried to fix the sound(sample attached) with Adobe Premiere Pro and Adobe Audition - but can't find the appropriate filter to make this background noise disappear. Any ideas on how to do it?MIC used is AT2020 Usb (AudioTechnica) and I might have been too close...Thank you,Lison

I'm narrating audiobooks, and I've recently tried using Adaptive Noise Reduction. It work really well, except it leaves behind weird sounds that almost sound like mouth clicks, but weren't there before I applied the effect. I've tried adjusting settings but it hasn't fixed it. Help! Photos are before applying the effect, after applying the effect, and my current settings. Thanks! 🙂   

Bonjour,Comment remettre le curseur d'adobe audition en marche? le mien est bloquer.Léon à Kinshasa/RDCongo 

Premiere Pro would not read some MP3 files.  Someone said toconvert them to aiff, which did work.  But the file size multipliesby ~TEN !   What happens when that happens?  I can only imaginedust and air being introduced in all the spaces between the old andnew megabytes, like in a photo over enlarged to dust and air.

I've just started using Audition and I've got a video that's 2:30 in length. Now I created a Multitrack Session and when I put in the video, I noticed that the scroll bar at the top was SUPER tiny. This is also when I realized that the length of the session was over 10 minutes long. I've looked all over Audition and searched the forums and the help, but can't see how to make it smaller. Yes, I know I can zoom in and I know I can just export the selected, but I have to scrub through the audio a lot and with a scroll bar being a quarter of a millimeter, this makes working in small sections of the video extremely irritating.  is it really that hard or complicated to be able to change the duration? I see that it's 13 minutes in the bottom right of the program.

Everytime I try to open a certain audition file, the app loads and shows the project, but then almost immediately after, it crashes and becomes unresponsive. This results in me having to force quit the program. This does not happen with any other project file I have. Does anyone have any suggestions on how to fix this?

En las últimas actualizaciones, las ondas de audio son borrosas, esto hace dificil la edición. adjunto la comparativa con la version en la que todo era más claro.

Hi all :); I'm new entry.I have a problem with my Tascam M12 connected to Adobe Audition. DAW control is perfect with the choice of Mackie Live I can control everything and the FX part becomes my Master. Only problem I can't solve is this: Example two tracks;Voice Recording TrackMusic Sequence TracksI plug in the headphones;I hear the musical sequence track but I don't hear my voice.Anyone know what I need to set up?Currently in Input selects the recording channel corresponding to Tascam 1 = 1 Chanel 1; or to hear the voice/instrument in the headphones also in Input I have to leave "Default Stereo Input"Output what should I enter?I've tried everything, for sure I'm wrong to set something.Audition's Hardware Configuration has both Model 12 Input and Output.Can you help me?ThanksTano

How do I find again the screen which shows the Waveform and MultiTrack buttons top left? 

 Goodmorning everyone,I have a multitrack project with two tuned and processed tracks; I want to export them to Wave as a single file. When I go to select Multitrack and Mixdown it doesn't make me select anything. Why? Can someone help me? I'm new to Audition, I've always used Logic

Help! I'm so frustrated. While recording, I'm hearing both my XLR mic and my built-in computer mic through my headphones. My XLR is running through a CEntrance Micport Pro, then connecting to my computer via USB. I can record using my XLR, and I can listen back to it, but while I'm recording I'm hearing audio from both mics, which is very distracting and echo-y.  I'm recording in multitrack. I've tried plugging my headphones in to my CEntrance as well as the computer. I've tried all variations on the audio hardware settings / headphone placement. I get rid of the echo, but then I can't hear any playback. I can cleanly record and play back, but while I'm recording I'm hearing both mics. I selected my CEntrance in my MIDI settings for both sound input and output. I've been chatting with customer support for over an hour, and they had me reset my audition settings, but the same thing is happening. I'm on an older iMac, and when I record on my laptop I don't have this i

I can't seem to find out how to record a 81 BPM click track.Thanks.Dar

I recorded 14 channels of musical performance with a different software package (sony acid) a couple days ago.  Unfortunately, I had the ASIO sample buffer set very low because I had recently been using the system with a live internet-based software package (JamKazam) that performs bet with relatively small buffers.  So my ASIO buffer was 16 samples.  I forgot to switch the ASIO buffer back to a normal size before the recording session.  Our band sounded great during the recording sessions, but now, I have 3 hours of wave files that sound like they are being played through a blown speaker with a bad cable.  Given how hard it is to actually get together and perform during COVID, I would really like to be able to recover these files.  I am guessing that some combination of smoothing and filtering might work, because the underlying tones are there.  Has anyone ever found a solution to this problem?  I've attached a small sample of a direct recording

I have tried all the things mentions in other posts similar to this one