Audition

Hello Everyone. I recently had an Issue when Posting I could not see my Post, therefore I am Posting again, I hope It will Show.I noticed when I apply the Multiband Compressor " Broadcast" to my Clip, It makes the Clip sound Wonderfull.Would you please explain when to use this feature.Thank you very much.

Hi, I'm wondering if there is a way to simulteneously eliminate all instances of a given frequency or sound that recurrs throughout a recording. I have included an exerpt from a podcast I worked on the other day where the repetive sound was kind of like a plosive but generated by some electronic glitch. I would typically scrub out plosives as its more precise but I'm wondering if there is a way to create a noise print of a problematic sound & apply that process across a whole file without distorting everything else too much? It would take forever to scrub each instance of this sound out in this case as its every second or so but the sound is too short to eliminate using the Noise Reduction process. Is ther another way? Thanks in advance for any insight!

I'm having trouble in editing after recording.  After capturing an intro segment of audio for noise reduction (>Effects>NoiseReduction/Restoration>CaptureNoisePrint) and then applying it it the entire file (>Effects>NoiseReduction/Restoration>NoiseReduction(process)>SelectEntireFile>Apply) it wiping out my entire recording. I've been using this process for my VO recording in the past with no problem. Any suggestions?

I am trying to find a way to move the playhead forward and backward one second. The goal is to have markers throughout the verse, chorus, etc of a song. I would be able to jump between the markers with keyboard shortcuts then have another set of keyboard shortcut to jump around at a one second interval once i'm within the verse or chorus. I know I can shuttle left or right but I need it to be a set time of one second.

Hello, I've searched online but this specific issue doesn't appear to be answered, so here goes: With the Preferences > General > "Synchronize selection, zoom level, and playhead across files in the Waveform Editor" ticked, source files double-clicked in a Multitrack session should open up in the Waveform Editor with the playhead and / or in/out markers at the corresponding point/s.In truth, this only happens sporadically, sometimes working but often not.Preferences > Multitrack Clips > "Synchronize clips with the Waveform Editor" is not the answer - this just synchronizes Waveform & Multitrack according to shared timecode, e.g. double-clicking at 1 min 3 secs into the multitrack sequence opens up the Waveform Editor at 1 min 3 secs into the source file. What I'm trying to do - and which sometimes works, but sometimes stops working - is open up the Waveform Editor at the same point within the source file which I've double-clicked it in the multitrack sequence.  Use

I try "noise reduction" ,"automatic click remover" and "automatic phase correction",but didn't workhow should I do ?

Hey guys! I hope everyone is keeping safe.  I am a voiceover artist and just received a job where I have to record 3000 words (sometines small sentences). My client requires a 5 seconds pause in between each word.  My question is, is there a way of automatically addind 5 seconds of silence in between words? What would be the best and quickest way to do so?  I use Audition CC 2020.  Thank you so much for your time 🙂  Have a nice day

Hi, I'm unable to record internal audio using Adobe Audition CS5. I have a HP G40 G1 laptop with Win10.  On my Win 7 I was able to do it because it had Envy24HF AudioDeck Control Panel where I could change the input to Stereo in but I'm not able to do that on my new laptop.  Any suggestions?    Thanks. 

So I recorded an interview recently and when I went to go edit and post-production the interview, I got this message and the interview only open partially I saved the file with a name and as an MP3 file. Any suggestions to prevent this from happening again?? 

For some reason ever since the last 2 updates to Audition, everytime I go to use my second screen Audition crashes.My workflow prior to this bug was to have my timeline on my right hand screen, and the video on the left hand screen. Everytime I try to place the video on my left screen the app freezes up and crashes. I've tried turning off hardware acceleration, turning on/off full screen, different resolutions, etc. I've even completley uninstalled and re-installed the software and I'm still having this issue. This is making it impossible for me to edit audio for video content as I cannot see the video unless I leave it as a tiny box on a single monitor. Any help on this would be greatly appreciated.

I'm pulling old four-track tape recordings into waveforms in Audition. Once I have waveforms recorded, how do I get them into multitrack files? I've tried copy/paste and exporting. 

Steve, I typically record to one external drive and, later, back-up files to a second external. Thus far, I've had my temp cache locations set just the opposite: the primary temp cache on the second external drive and the secondary temp cache location on the first external drive.  I do have a tendency to overthink things, thus, my idea was have the primary cache located in a place other than where the audio is being written. For maximum efficiency and reliability, where would you recommend the temp cache files be located? Thanks.

Hi,After editing my podcast episode, I batch processed all of my audio clips using the Match Loudness tool in adobe audition. Unfortunately, I made a mistake in the parameters that caused the audio to be terribly clipped. I exited the session and clicked 'No to all' when it asked if I wanted to save the audio files with the settings changed.  I reopened the file but the audio clips are still screwed up...PLEASE HELP! I am really hoping these mistaken loudness adjustments are able to be undone.

Hi!I'm trying to use the DeNoise effect in Audition (2019 version). I've watched a couple tutorials for how to do it, and followed the steps correctly. The first time, it worked  perfectly; however, I haven't managed to make it work properly again. I'm sure I'm doing it correctly so I'm not sure why it's not reducing the background noise. Even with the "amount" slide turned to 100%, there's little to no difference in the audio. Any help would be greatly appreciated!!

Hi,Question from a newbie in audition 🙂How can I mute an area in a single clip?Sure I can set four keyframes and mute the middle two. But I am looking for a faster solution like select -> shortcut.In audacity there is the function "Audio to Silence". Is there anything similar in Audition?Thanks in advance!

Audition - simple thing but NOT working. Have ASIO module that I use to play videos and get the sound for that when I play the video in anything other than Audition. Audition says the module "is not working" The driver IS up to date (I'm not that stupid). Module works on several other softwares but NOT in Audition. WAS working perfectly until I did a restart. Didn't make ANY changes. Any ideas on how to get a simple ASIO module (EdirolSD90 for those who need to know) working again???Tried MME - nope. It's ASIO. Input AND output.

Hi all, As soon as I updated my Audition to the newest update it's been really slow. Deleting a section now take 10 seconds instead of it being instantaneous. I have enough RAM, all up to specs etc but for some reason it's just slow now. I've had to install previous versions and now it works instantaneous. Any idea what on the new update it could be?I've upped the ram on my computer, made sure the file size is huge.  Its has to be a setting that is now default on the new update. 

What is the best way to record (vinyl) for use in itunes? I am presently recording and marking cue for each track. Then exporting to desktop. When I open in itunes all tracks are saved as individule song files. How do I save these song files into a album file in itunes?   [Moved from Community Help (which is about the forums) to a better forum... Mod][To find a forum for your program please start at https://community.adobe.com/]

Hi there.I am trying for the first time to use my macbook air to record direct into audition.  Here's some background... 1.  I am using a Mac OS and this is running the latest version, having just updated it2.  I have just got a Focusrite Scarlett 2i2 USB input3.  I have checked the device is selected in the Input Sound preferences in System Preferences and also in the Audition Audio Hardware.4.  When I run some audio with the system preferences window open, I can see audio level being received, yet when clicking record in Audition it is silent I saw a post about security settings and have tried the Audition setting in 'microphone' both with the box checked and unchecked, but it didn't seem to work. Can you please help me.  I have a big recording session to do tomorrow and am getting very stressed over thisThank you so much

Hi! I am trying to record a  keyboard track in a multi-track session playing along with an audio file.  I am using a sapphire 6 USB by focusrite... if I turn the volume of the keyboard up enough to hear it along with the other track I get a lot of distortion. Is there a way to reduce the input volume in Audition?

Hi, The technical requirements for my audio book were that they needed to be MP3 or FLAC formats, 192 kbps or higher, and 44.1 kHz.  So, when I opened a file in Audition, I specified that it was 44.1 kHz and I saved them as FLAC files.  But now I am being denied the ability to upload because they aren't 192 kbps.  Please tell me there is an easy way to adjust this.  Please.   Thank you, Lara

I am trying to programmatically edit a spectrogram to remove certain occurrences of words or noise. Something similar to a spectral gating. Manually I can edit the section of the spectrogram using marquee selection tool and delete the highlighted section. Is there an API to achieve this? 

This is NOT an issue with the audio. It is an issue with the interface/latency settings/resources. Does anyone have some suggested settings or a cache that can be manually cleared that might free up resources for Audition. Currently I've got most of the memory allocated for Audition's use and playback is fine unless you do something like move the mouse. Then it stutters and crackles until you stop. Even more confusing is that sometimes it does this, and other times it is fine!* *The latency issue also occurs in Ableton, but only if i'm pushing over 24 tracks, which is kinda to be expected. Occurs in Audition with more than 3 tracks. Machine specs:Intel Core i7-7500U @ 2.7GHz8GB of memory. Not EXTRA beefy, but should be enough to get the job done. 

Load something into edit and then mix view, look at the Main Meter the 114dB range meteryou will see a difference of 3dB in levels. to check my claim create a Sine Wave in the Mix View Window at 440 hertz at -6dB it will load into an empty track, play back the file and check the meter, it will read at -9dB if you now double click on that file and send to the edit window and play it back it will indicate the correct level at -6db. and visually be at -6dB. Now mix down the file you have created in the multitrack Window, when checked it will be at -9dB. "Is this a fault or have Adobe created 3dB OF HEAD ROOM" I would have thought that both Edit and the Multtrack Window should be calibrated at the same level, could someone please pass this on to the right person please.  Roger Mallison Australia

I'm using Audition 2020 on a Mac. My Zoom H5 records in stereo, so when I import voice tracks for podcasts, I need to convert those to mono. Lately, converting results in silence. In the mastering workspace you can see a noise floor, but it's otherwise totally gone. I can split the channels into two tracks, but merging them (convert to mono) doesn't work. What gives? I've reformatted my SD card, no change. btw - I do not have spectral display open when this happens. I'm in the classic workspace.