Audition

Having been frustrated for years by the abject lack of documentation for Extendscript I find this to be phenominal. I just used it to create an extension for Audition (probably the least documented platform) that removes gaps between all clips in a miltitrack track. (Disclaimer: I have not tested this code, so there may be errors and it may not run at all.) As I disclaimed, this code is untested and as yet hasn't been run in Audition. Even so, the fact that it has providd a good starting point is astounding considering the ¯\(°_o)/¯ attitude of Adobe concerining documentation of Extendscript and CEF extensions, particularly in reference to Audition. This is a shame because Audition could benefit from scripting almost as much as Photoshop or Premier Pro. I'll not go so far as saying that it can benefit as much as After Effects because, obviously, AE is incredibly complex. This just blew my mind a little bit, so I had to share it. I have been trying to do this for years but the

After I zoom into the timeline waveform, if I hit the space bar to play, the Move - Restore- Minimize popup, opens up in Windows, no issues on Mac. It's not the end of the world but it's obnoxious to use this program having to stop and click off the box every time I make a zoom and hit space. This box    

I have a number of old ASND "resources" pulled from an ancient (discontinued/abandoned) 68k macOS app; I think I used resEdit (on a 68k Mac) some years ago to do this; I was able to play the audio on that Mac. However, it's been many years and, although I still have the files, I no longer have a 68k Mac. Audacity is unable to do anything with them; I even tried importing as raw data (which did import something but the result was just a less-than-a-second bit of static. Likewise, Audition is clueless.I thought these were created with Adobe Soundbooth (as a web search revealed that ASND files are associated with that app) but Mac ASND "resources" pre-date Soundbooth's introduction by at least 13 years. If anyone knows of an app that can convert these ASND resource files to MP3 or anything playable today, I'd appreciate advice. I can't attach any of the files to this post but will be happy to eMail a couple (or post them in a cloud drive) if you'd like to attempt a conversi

Hello, I am using Adobe Audition for sound design for a short film for the first time and am finding that the clips I edit are audible outside of the edits. The sound does not start or stop exactly where I’ve edited it; it starts a few frames before the clip and continues a few frames after. This happens whether I have applied a fade or not. It seemingly creates its own fade, which exists outside of the visible clip, making it impossible to achieve the accuracy I need. Is there a way to fix this, or turn off this feature? Thank you!-John

Is there any shortcut to "Choose Multitrack > Track > Duplicate Selected Track"?Couldn't find any in the shortcut library.  I need it f.e. when I position one instrument left and the other to the right. thankss.

Hi  i have issues with having my audios being rejected from an online platforms for problems of white noise that i cant hear nor correct "please remove the white noise before adding the music. The static can currently be heard overpowering the music."  since i bought a professionnal mic zealsound k66 and did edits with adobe audition. eventhough i put it at the top my sound is low and i have to enhace it digitally and i would like your feedback my white noise is at -100db which is very low but even that i had this feedback , do you have ideas? i put you 4 audios of 90 seconds (some audios begin at second10) i put the raw and the final version thanks so muchRAW https://youtu.be/Yr792kI-WgASUBMITTED AND REJECTED https://youtu.be/jzBFpDtMRnERAW https://youtu.be/EV3dsNNzBSUSUBMITTED AND REJECTED https://youtu.be/D9O_MCaWlZcThanks so much jihane

My team use Audition for Post Production Mixing, Sound Design, Podcast Editing and every day we demand a lot from it at an advanced level.I’ve found particularly over the last year or two that new releases and features have slowed significantly. We appreciate improved stability that has come with this, however it worries me going forward that as users we’re being left behind.What can you tell us about the future of Audition as a Digital Audition Workstation? What new features or workflow improvements can we expect? Is its functionality likely to amalgamate with other Adobe apps longer term?

Sorry maybe this is a stupid question since this should be obvious but I'm not 100% sure. If I open a track in Wavefrom view, and select all or part of the track, and then select an Effects Preset do all the Effects e.g. 1, 2, 3, 4 & 5 inside that Preset get applied to the track one by one in that order once I click Apply?

Help! I have been working for over 18 hours on a podcast episode, and am now unable to open the file due to this error message I am receiving. I have been working with Adobe Audition for over 2 years and have never encountered this issue before. I am terrified that all my hard work is lost. Any advice you can graciously provide would be deep;y, deeply appreciated by me and my team!!!!  I didnt do any updates overnight or anything, and there was no apparent program crash. The error message is: "The Byte Stream Type of the given URL is unsupported." 

I have my sampling rate set to 192000Hz, so I should theoretically be able to see up to 96kHz on the spectral display.  I can scroll in and out to show fewer or more frequencies but there is no option (via scroll whell or right click) to expand the view past 60kHz.  Is there a setting I've inadvertently put on to limit the spectral display? Any help is greatly appreciated.

Hello everyone, This might be a very basic question, but unfortunately, I can't find the option in Audition: I have an audio with two speakers, both of their voices average at about -3db. Alongside the voices, there are also (unfortunately many) smaller background noises (like birds, etc.), all of which are around -15db or less.I would like to silence everything in the audio that is quieter than -15db. Isn't there a simple way to do this? Thank you very much!

Not sure if anyone here can help with this, but here goes:I'm using  Audition 24.2.0,83, Mac OS 14.3.1 on a Mac Studio M2 Max 32G This plugin behaves badly in Audition, but functions as expected in  the other DAWs I could try it with.It has a quasi sidechain function to prioritize EQ across tracks., but in Audition invoking this part of the interface results in erratic behaviour rendering it useless. (See attached screen recording) Sonible support has been back and forth with me on this, but they seem to think that something on the Audition side might need to be tweaked. They think some hidden preset might be interfering. I've reset prefs and cleared caches, restarted and re-installed without resolving the issue.  Here's the FAQ Sonible has about the issue:."smart:EQ 4 uses inter-plugin communication using IP addresses. When working with presets within EQ 4, these inter-communication settings are properly stored in the presets, so when

Hi.  I run a college radio station, and people are frequently changing the layout and look of Adobe Audition. While I'm fine with this, I want to be able to go back to what should be a default layout for our station.  So, I set up the layout the way it should be and saved the workspace with an obvious name.  Is there any way to LOCK the Workspace so that even though people may alter the view, they cannot SAVE it?  For background, while we have many users, it is inconvenient to have each person login under their own Creative Cloud account, so we simply have CC logged in under ONE email and do not log out.  We want uniformity, especially for training purposes. Are these Workspaces saved in Windows somewhere or on the cloud where they can be set to Read-Only status once I set them? Any tips or help appreicated!

Hola, tengo una subscripción Creative Cloud desde 2019, por las razones que sean, no me instalé desde un principio todas las aplicaciones que formaban parte de dicha subscripción. Ahora intento instalarme Audition, pero la última versión no es compatible con mi sistema operativo (masOS Catalina 10.15.7) y no me permite instalar una versión más antigua. ¿Existe alguna manera de poder instalar dicha versión? Gracias

I'm facing an audio restoration issue that goes beyond my skills. I have a recording of a book discussion that was intermittently disrupted by a boisterous kid in the back of the bookstore. I am trying to figure out tools/workflow for minimizing or damping the child's voice, which is quite a lot higher than the two male adults talking in the foreground. I've tried fiddling with it in spectral view with the heal tool, but my results are unusable. This isn't anything I've had to tackle before. Any advice on how to quiet down that kid? I'm sure he was charming, but he doesn't belong in this recording. I'll attach a short WAV that illustrates what I'm up against. I'm in Audition Mac 2024. Many thanks in advance!Edward

Hey everyone. I've been fighting with Adobe Audition for the past two hours, i've gone through youtube tutorials and nothing is working. Maybe you can help. I'm trying to do a Podcast with a friend and I THOUGHT the difficult part would be recording the phone call. That setting up my USB mic would be easy. HA, not so much. Anyway. I've gone into audio hardware and set default input to USB DIGITAL AUDIOthen on track 1, i have Stereo [015] USB DIGITAL AUDIO: FRONT LEFT I've pressed R  and nothing. It doesn't accept it. I speak and the levels don't move. Can anyone shed some light on this problem please. Thanks.

Maybe I'm missing something. So...If the CD title and track information doesn't exist in the CDDB Server Audition will only extract the cd audio with "CD Track 1..." etc.   Why doesn;t it extract the track namesmastered on the audio cd???? If I rip the CD using Windows Media Player, windows media player is able to read the Audio CD Data that is embedded on the audio CD. So as a work around I constantly have to use Windows Media Player to rip the CD and then import the audio back to Audition. Really don;t need the extra step. It seems you need to make an improvement to the why Audition Extracts audio from the CD since not all titles are available on the CDDB Server. It would be a nice enhancement if you program Auditon to extract not only the audio but the title information on the CD and also have an option to select that insterad of always pointing to the CDDB Server. Thank you.

Here's a blast from the past. My setup: Windows 10, 32GB RAM, Kabylake 4.5GHz, Mackie 400F audio interface (firewire). The 400f works as expected in Windows. ie. I can select outputs 1/2 and play audio from the PC through the interface. And it appears on the 400f Control Room outputs.  In the past (like 5 or 6 years ago) I was able to get audio out of the 400f via Audition. Its been a while, so I was setting it all up again.However in Audition, I now can not get any audio out of the 400f. The sample rate of the Multitrack session and the 400f are the same. 48000Hz.I have Audition set to ASIO, and have selected the 400f in there.  In the Mix channel in Audition, I have tried Default, Default Output, [01S] Analog Output 1. None of these produce sound from the Control Room outputs, or the headphones out. Its very odd... I'm hoiping someone out there has this interface working, or maybe some things I could try. Thanks,Norman

Hello, I'm pretty new to Audition so hoping this is an easy fix. My spectral frequency peaks are "cut off" at about 10k Hz. How do I adjust my settings so that this doesn't happen? I'm recording in 48000Hz, mono, 16 bit depth, and saving as .wav.

Hi Guys,   I recently had to disconnect everything to do a mobile recording project.  I ran into some problems that I eventually figured out, but when I set everything back up here in my studio, my "Record" function on the individual channels is now greyed out - unusable.  I'm thinking some setting got changed, but I can't for the life of me find anything that seems to relate to the channel functions.

Greetings,Does anyone have a workflow that you would suggest for using Audition to edit a podcast interview?I have 2 or 3 different audio files, separate for each guest, recorded from Zoom, often 30 - 50 minutes to clean up. I work mostly in multitrack but sometimes enter waveform for more detail.Here is the order that  I have been doing, so far1.  Noise Reduction to clean up ongoing background noise that is consistent2. Diagnostics to Strip Silence to identify breaks3. Listen and manually edit ums/so/you know, odd single noises/word fumbles4. Essential Sound for a little enhancement5. Add intro and exit sound clips with music6. export mixdown I've noticed that I spend a lot of time waiting when I do my manual edits and am wondering if I should do those first.What other effects/edits do you use regularly?

Hi, I use Audition to edit my podcast, and am often using a similar command pattern to get rid of "ums" and other pauses --> time select, ripple delete time selected in all track, select clips to end of session, nudge left 5. To varying degrees, after a number of rounds of this pattern Audition begins to slow down dramatically and then freeze for 5-10 seconds. This happens specifically during the ripple delete or nudging commands. After it slows down, it will evnetually just get stuck on the nudge command as if I'm holding down the hotkey for it or as if I have hit it a bunch of times and a row, and it will just keep nudging uncontrollably for 15-20 seconds until it finally stops. Then I must undo all of those steps, save, and quit. Once I quit and reluanch, it works fine again, and then after a few rounds, starts to slow. The thing is, there are times when this doesn't happen or only happens after a while. This week, it's happening after only 2-3 rounds of commands (meani

I have recorded a 30 second piece for IVR and have gone through all of the steps to save it to a ulaw file, but the client is unable to upload it to their IVA system. Any suggestions on what the issue might be? I've recorded an original wav file, then converted it to a ulaw file as per the pictures below.

So this has happened three times now where I've taken a file from premiere to audition to edit the sound. Ive spent ages working on it saved it in both sections. It says it's saved and the next day I open the project and nothing has been saved. The only evidence that I have actually worked on it is the PKF file which I have discovered through looking on these forums is useless to me. I should note that I am using a trial version so I'm not sure if it's related to that but it is certainly deterring me from buying this product. Can anyone help me out? Thanks 

I batch converted all my clips from mono to stereo, and now I'm having an issue. I'm new to Adobe Audition, so I'm hoping this is something super simple that I'm just missing!In the multi-track, I can hear the sound coming from both channels. But when I go into the Waveform for each clip, the sound comes from only the left channel. I see waveforms in the right channel, but it appears grayed out. When I click on Edit/Enable Channels, it looks like only the Left channel is selected — but when I click on "All Channels" or "Right Channel" to enable them, nothing happens. Any idea what could be happening here?