Audition

Hi!! I am trying to select specific waves to silence them (as they are birds chirping and I do not want that in my sound) and cannot figure out how to do that?? I have included an image below. If you have any suggestions I would love to hear them!! Thanks so much!

Hello everyone, I've been doing voice-over for about four months and am really enjoying it and learning a lot as I go. However, I've been having an issue that I just can't figure out. Searching on these forums, Google, and YouTube hasn't revealed a solution. Basically, some parts of my words (beginning or end) either sound muffled/underwater, and sometimes the letter in the word is absent entirely. This seems to happen randomly - the only time it happens consistently is at the very beginning of my voice-over after at least 10 seconds of silence, but it'll also happen in my live read in the middle of a sentence. I have experienced this issue with different microphones, and with/without windscreens and amplifiers. Also with different mic distance to mouth and different levels of amplification. I don't believe this is sibilance or plosives but I could be wrong? For reference, I'm currently using a RODE PODMIC XLR and Behringer U-Phoria UM2 interface, with a Klark Technic CM-1 mic boo

Bonjour !Je viens d'acquérir une interface audio Behringer UMC HD 204.Les branchements sont faits, l'inteface est reconnue. C'est ok.J'entends parfaitement le son de la piste amorcée pour l'enregistrement ( mon synthé), MAIS je n'entends pas les pistes déjà enregistrées ( le playback).Pouvez-vous m'aider ?Merci beaucoup !!Philippe

A month ago, I received an error code 205 when trying to open adobe Audition on my M1 MacOS.  Only one of the production computers I use it on has this problem.  On all systems all other Adobe Apps work without a problem.  I saw one thread which suggested a fix via a Microsoft .exe file update.  So, not applicable here.

This is driving me insane! I'm using CS6, yes I know, old. Anyway, I open Au, choose waveform and the settings I have used hundreds of times before,  click to record and it just sits there! I have closed all other programs, done all the maintenence things, rebooted the computer, absolutely everything I can think of short of uninstalling and reinstalling the program. This is new since the last time I recorded. I haven't purposfully changed anything, it just won't freakin' go! Please help!

I have an audio recording that has multiple people talking. However, one person (male) liked to talk over everyone else. I want to remove his voice so I can use the other people's voices (all females). Is there a way to do this in Audition or am I out of luck? The file is part of multi-track audio in a video file (mp4), all the voices in question are on 1 track.

Hi everyone,I am wondering if it is possible to use/integrate Voicemod with Audition. I just started using Voicemod and have reached out to their tech support with the same query. But in the meantime, does anyone know if it's possible? Either by integrating Voicemod directly into Audition, or exporting a keybind or voice recording from Voicemod into Audition as a .wav file?

Good evening. I just realized that I built an entire session in the sample of 48000. Now I can't copy/past files into this session from my 44100 sessions. Is there a way I can convert this 48000 session down to a 44100 session? I tried batch process and it looked like it would work, but I got a warning that it would not...and it didn't. I don't want to have to rebuild this session. Any advice would be most appreciated!Joey

I've loaded the tracks into Audition and applied no effects or anything to them, just started playback before doing any editing. For some reason the slightest breathing noises are insanely amplified, as if Audition is trying to bring them up to the normal volume of the rest of the track. There's another instance where I have to jack the volume up very high in a regular media player to hear a tiny breath, but in Audition it comes through as a loud pop. None of this is happening in Audacity. I haven't had this happen before and have no idea what's causing it.

I've tried more than a few times and a few different ways to save a .sesx to a new file and change the sample rate, and whenever I do, the multi-track clips don't adjust properly, leaving (non-destructive) edits to clips completely wrong and sounding bad. The first method was something posted in 2017 here. It worked for the OP, but either he had a simple session, or the process no longer works. Then I discovered File > Export > Session... which also allows you to adjust the sample rates of the files in the session, but the resulting session also has issues with the conversion. In Audition 3, you could Just do a Save As, and the program took care of the rest (converting all files to .wav and the right sample rate for the session) when you checked the "Save All Files..." checkbox. Just wondering if there is a way to get this to work?

I recorded a WAV file in Adobe AuditionI removed the breathing noise (Effects/Noise Reduction/Noise Capture/Apply)I confirmed the sound was removed by replaying the WAV file.I saved the WAV File.I exported it and renamed it, just to be on the safe side to make sure it was really removed.I played the exported file in my Windows default audio player and confirmed the breathing noise was removed.I opened Adobe Audition and created a new Multi-Track / Podcast templateI opened the exported WAV file in my multi-track session.I pulled the exported WAV file into the host section of the podcast. It LOOKS like the breathing is gone because the audio line is completely flat between sentences. But, when I play it...The breathing is back!!!  The sounds that I removed weren't REALLY removed? They were still included in the file after I exported it? I called tech support. They said, "It happens sometimes." Can anyone tell me what I'm doing wrong so that this doesn't happen sometimes?&n

I'm comparing two audio files and need to quickly change back and forth between the "A" audio (on track 1) and the "B" audio on track 2. What I've been ding is just using the Mute or Solo buttons on each track. But that takes too long.  Is there a way to do it like when you are auditioning an effect? You can click the Preview button, and then toggle the Power State on and off to quickly compare.  Thanks!

It would be like Moms Apple pie if I could add Normalize -3 db in my effects rack..... my question is why not?

Bonjour, je suis débutant et je dois enregistrer une voix off pour un documentaire sur AUDITION .je dois obtenir des fichiers 48Hz 16 ou 24 bits Pouvez-vous SVP conseiller des réglages simples pour assurer un enregistrement avec un bon niveau ( ni trop fort ni trop bas ) et une bonne qualité. Le documentaire devrait être diffusé à la TV ( câble ) et en festivals ,merci d'avance !romain   

Buongiorno vorrei sapere se mi abbono a Adobe podcast ( 25 eu) quanti file mp3 posso caricare? Di quanti minuti posso essere ?

Is it possible to set up Audition to open with a multitrack recording Template by default, asking  for the session name, as seen below?All without doing anything more than opening Audition.Or, opening not Audition, but a template.Again, with the box below simply asking for the name.

I have Audition installed to do voice-over and audition reels. When I try to record ANYTHING over a sample rate of 32000, the app slows to a crawl and does not record. I have uninstalled and reinstalled the app twice. I have removed any other apps that I thought could be conflicting with Audition. I have stopped processes in Task Manager that I thought were taking up ram... NOTHING is working. I can only record at 32000 or lower... which won't work. What am I doing wrong, and how can I fix it so that I can use this app for my needs. SUPER frustrated. I have a very new Dell computer with 16g DIMM Ram and an Intel I7. When I FIRST installed the app, I was able to make a sample reel... NOW, now I can do nothing and I am begging for help.

I've had Audition installed for years but rarely use it. It's just so loud. I can't figure out why Audition bypasses my windows volume setting?

Hi !I have a problem with the file I'm working on, the .sesx file does not open anymore. 😕😕I work on an external hard drive and for a few days I have the following problem: "Error: Media Foundation reported an error when opening the file. The byte stream type of the given URL is unsupported."The problem is the same using another computer,  I don't know what to do to avoid losing my job, can you please help me?ThanksG

impossible de démarrer adobe audition 14.2 je l'ai désinstaller plusieurs fois ainsi que adobe cloud mais rien à faire j'ai toujours sur mon pc window 10 erreur system que faire il ne veut pas souvrir ?

Hey guys, the icon to engage my record channel is greyed out for some reason, see screenshot. How do i fix this? Thanks!

Hello, I am in desperate need of help. I have 3 small clips with wind noise and I tried a lot of things to fix it, but I cannot seem to be successul. Can I pay anybody to please help me. I am on a deadline. 

Hi guys, So this is an error, either on my part or on Audition, that's been bugging me horribly. I'm mixing sound for a trailer, where several clips within the overall mix need to be converted to stereo and so on.When I modify the clips on waveform, as one should, set all my custom stuff like convert to stereo, and adjusting the DB, it's all fine, sounds perfect. It's saved.Then when I switch my view to the multitrack, the change is not reflected on this view, specifically the "stereo convert" - the DB adjustments and any other do.What am I missing? When I go back to the waveform of these clips, the stereo is there, perfectly fine. The only way I've been able to cheat myself into this fix is by re-inserting and re-sync the clip manually, which is an insane way to do this.Can anyone help?Thanks!

Hey, I have had this issue a few times and I have no idea why it is happening. I have a nice stutter VST (third party) on a waveform view on the effects rack. I listen to the preview, sounds awesome. I then apply the effect and it sounds completely different and there is no stutter it just sounds a bit deeper and totally different. Can someone help me? I saw something about Bit Rate etc and pre rendering tracks but this doesn't help at all.  Thanks! ❤️ 

If you use Audition to rip audio CDs, you've been able to utilize the FreeDB service for capturing the album and track metadata.  Unfortunately, FreeDB was taken offline a few months ago and the default settings will no longer work.  Fortunately, the service has been spun off as a new open-source service known as GnuDB, using the same API and protocol as before.  You can update Audition to utilize GnuDB by clicking the settings wrench in the Extract Audio from CD dialog and change the CDDB Server setting to gnudb.gnudb.org