Bridge

Having a problem with bridge reading the files from the xqd card.  The files show up as .NEF but I cnnot open with camera raw from bridge, the icon for camera raw is greyed out.  My laptop does not have a card reader so I am plugged into the camera HDMI port.  Not sure what I need to do here...

When opening a folder with Photoshop files, Bridge only give me thumbnails of roughly half the files. I've tried refreshing the view, resetting preferences and also changed the preferences on how big a file to process the thumbnails. Nothing makes it show up. Pic attached to what I see

Hi all trying to upgrade bridge and PS too see CR3 files from the new canon cameras, nothing is working, says file type cannot be opened and in preferences there is no option for that file type, Thanks in advance Bill

Hi! I'm using Bridge on two computers and I have defined simple workflow on both - change resolution and save as JPG. And on first coputer it saves metadata, on another - not. And I don't know why - the only diffenrence is that one is Mac with Intel, second with M1... And on mac with M1 metadata is not saving. Any ideas?

Socorro! Tirei algumas fotos com minha câmera e sempre usei o importador de fotos do Bridge para transferir para o computador, mas dessa vez eu criei uma pasta com algumas fotos que estava selecionando no cartão SD e quando fui transferir para o computador, todas as fotos dessa pasta foram deletadas, ele transferiu apenas as fotos que não estavam nesta pasta e como eu sempre fiz o procedimento sem problemas, mandei excluir as fotos que já haviam sido transferidas. Ele deletou não só as transferidas, como estas que não foram transferidas. Como arrumar isso? Essas fotos podem ter ido para algum outro lugar no computador? Com outro nome? Isso é muito sério! Eram fotos de um evento muito importante!

What else is one to think, when months pass, telling Adobe techs, that if you search by rating, the only choice is reject.  And videos give wrong dates and times. This is not just on my computer, as Adobe techs verified and also I checked with someone else who has the adobe extortion subscription.  One can absolutely not get through to any real person to do anything about these and other problems.  And though I am obviously connected to the Internet and just updated Photoshop, there is no new corrected update for Bridge, as repeatedly pleas to the Adobe help techs to pass the unresolvable problems to management has changed nothing.  So I am connected, paying ~$11/month for defective programs I can't even use, because it is saying my subscription can't be verified as I try repeatedly to open Bridge.  I can update CR and Photoshop but can't be verifed to open Bridge. What a toxic, bug-ridden system, with either humans with their heads in the sand, or automatons t

I'm trying out Bridge for the first time.  When I first installed it, I could double-click on a photo and it would open in an editor/viewer (I'm not sure whicn one - I wasn't paying attention). But after the first update (which happened automatically), when I click on a photo nothing happens.  I checked the file associations and they are all blank.  So that's the first thing - the update appeared to wipe out the file associations that were there by defult from the install.Now, if I try to add a file association (for .jpg for example), what do I set it to?  When I go to change it, there is a "browse" button, so I guess I have to browse to an .exe file for some photo editor.  The problem is, I can't find one.  I have Photoshop Express, but I can 't find an .exe for it.  After changing folder security settings, I was able to get into the \WindowsApps  folder  and find the Windows Photos app, but that app can't be started by simply running

Hi all, I have problem that Bridgen can't open an external SSD drive. I recognize the drive but refuses to open it så I can't open the maps on it and reach my image-files.Photoshop has no problems open the drive. Thanks for your help. /CekariYH

Hello - I recently updated my photoshop to 23.3.1 on my 2020 Mac Mini M1 and bridge stopped previewing some of my files. On my 2016 MacBook Pro Bridge previewed all of my files correctly but I did notice that I'm running photoshop 23.3 on my laptop. So I downgrade my photoshop on my Mac Mini to 23.3 and that didn't solve the problem. I upgrade my photoshop on my laptop to the latest version 23.3.1 to see if Bridge on my laptop would start behaving like Bridge on my Mac Mini but it worked fine. I don't know what else to do! I need some help, please. 

Why does this link to a video just keep asking me to say UK / USA and then doing nothing, despite being logged in?Where is the video?https://helpx.adobe.com/uk/photoshop/how-to/bridge-customize-workspace.html

I am using Bridge Version 10.1.1.166, which I believe is the latest version, on a Windows 10 PC. When I have finished editing my RAW files I can convert them to JPEG from Bridge in two ways (maybe there are more than two ways but I am not familiar with any others.)Method 1: I select my images in Bridge, go to Tools>Photoshop>Image Processor and choose to save as JPEG with options set as required.Method 2: I think this may be relatively new, well it is to me! Use the Export Panel in Bridge I drag my images onto a previously created preset which is set up to export as JPEG with options set as in Method 1. There is no option here to convert the colour profile to sRGB IEC61966-2.1 but that seems to happen by default using this method. I like this method as it does not involve opening Photoshop. Both methods work fine but I see one difference which is that Method 1 produces JPEG files with the file extension "jpg" whereas Method 2 produces JPEG files with the file extension

While many applications use caching for speed of operation it does add a limit to the manageable size. Bridge 2020 version does not handle the notification of running out of cache resources too well. As cache use is accumulative, the size of the batches are proportionally reduced with each run until Bridge gets bogging down or even freezes. It would be nice if Bridge could indicate when it is time to clean out the cache before reaching this stage. Once Bridge becomes unresponsive I must resort to the kill application function on my system. When Bridge is restated the cache is empty. Unfortunately that often means reselecting a new batch and sometimes even building a new search index. To ensure I don't lose any file keyword metadata in the process I usually create a collection from the selection to fall back on after killing Bridge and starting it up again. I really need more computer resources to cover the batch volumes I am working with... but that's another story.

how do i get Bridge to work with no internet 

After upgrading to OS 12.3.1, the latest version of Bridge cannot see subdirectories on external drives. The files are all there and can be opened by Photoshop / ACR. I was using Bridge immediately before the installation and immediately afterwards it could not see the subdirectories. Bridge has all the pernissions necessary to access the drive. Any thoughts?

When I try to load multiple NEF (RAW) files as PS layers from Bridge i.e. Tools/Photoshop/Load Files as Photoshop Layers I get the following: "Instal the latest version of Photoshop to continue" I have the latest version installed !

CS6 Bridge.  The default in viewing my thumbnail photos is Generate Quick Thumbnail.  I want to change the default to Generate High Quality Thumbnail. If I right click on Generate Quick Thumbnail. it will change to Generate High Quality Thumbnail for tje thumbnail Any suggestions?

Hello, Ihave Premiere, photshop, Bridge an Encore CS6 paid license which I perfect for my use.Suddely I do not have previe thunbnails from my Canon MXF videos in Bridge CS 6 anymore on My OS Windows 10 pro 64 bit Laptop.. I looked for a solution on Adobe, but the only thing Abdobe wants you to do is take a cloud subscription.However I want to keep using my CS for which a paid a lot of money.Also all CS6 update page are gone, you canont find any download software / updates for CS6 on adobe. Why???? Can anyone help me to get the MXF tumbnail previews working in CS 6. On my other PC which is runing on OS Windows 7 Pro 64 bit, the MXF previe do work in Bridge CS 6

When I use Adobe Bridge's "Export Custom" panel to export Illustrator (.AI) files I get this error: unsupported file formats. Does anyone know what has changed from about three versions to now?In Bridge version v10.0.0.124 it worked smoothly with .psd and .ai. But after this version it only works with Photoshop files(.psd). 

Hi,I'd like to rename new photos on the harddisk.I prefer the serial number (01, 02, 03...) and then the date the picture was taken eg 2017-05-12.So I need a form like yyyy-mm-dd, but in Bridge I  only can chose yyyymmdd.I also can't rename the files with Lightroom,because when importing them I only add them to the catalogue and don't copy themSo what can I do?Thanks.Kind RegardsRonald

Using latest release as of today. Edit/Find will not find files by Star Rating or File Name. The drop down for file types does not work. No drop down appears when trying to search for a file type. Trying the suggested fixes did not work. Reinstalling does not work. Running Windows 10. Bridge often crashes 

currently use Adobe Bridge 2019how can I still install the older version Adobe Bridge 2020, I currently still have the Mac Os High Sierra 10.13.6 on my MacBookAir 2011.Unable to upgrade the MBA !!!

Hello Adobe Community! I am attempting to assist a person who is troubleshooting an issue he is experiencing using Adobe Bridge. I have searched the community posts and did not find a solve for this. Using CC Adobe Bridge on a iMac connecting to a Windows server via smb:// where the RAW camera files are stored. He selects the folder and the RAW files display in the filmstrip on the bottom of the Bridge window where they are listed smaller number to larger from left to right. He will then select the image from there to Preview it. If it is one he wants to keep, ha makes no changes. If it is one he wants to trash, he marks it with a single star. Then when he has completed the evaluation of the photos in this folder he will select the single star photos so they all show in Preview and trash them from there. The issue he experiencing is that while he is going through this evaluation process in Bridge, duplicate files will start showing up in the filmstrip. It appears to be c

I have the latest Mac operating system installed and Bridge 2022 latest version does not open.

I have run into a problem which I can't explain.  I haven't changed anything I am aware of but suddenly I cannot Batch Rename in Bridge unless I save a copy to another folder elsewhere.  This wouldn't be an issue, but then I have to add this new folder with the rename to Bridge, and the old files on my SD card remain unnamed -- just adding a lot of extra work on my end that I have never had to do.  Please see screenshot below to see what my Batch Rename window looks like (Windows 10), Adobe CC.  I have uninstalled, deleted all preferences etc as well as cleared my cache. 

I am updating keywords on files stored on a gate Exeter always hard drive. I have everything backed up on another EHD. Recently I realized that that Copies of same files were not being updated and my keywords stopped traveling. I exported and imported my keyword hierarchical list. I updated to Bridge 9.2. But nothing is working. eould Appreciate any help.